fuel line and fitting kits

by Dr. Leif Rohan I Published 3 years ago Updated 3 years ago

How to make a fuel line?

When you are flaring brake and fuel lines, it is suggested you use a lubricant at the flaring head and line end. This makes the going smoother when you are flaring the tip. For brake lines, use brake fluid as a lubricant. For fuel lines, use a low-viscosity engine oil or even WD-40 as a flaring lubricant.

How to patch a fuel line?

How to Fix Leaking Fuel Lines. Put on mechanic gloves and goggles before getting started with the mechanical work. Use a screwdriver or socket wrench and appropriate socket to release fuel line fittings that you find while working on a leaking line. Use a flat-tip screwdriver to lever off a stubborn fuel line if it is stuck.

How to properly seal fuel fittings and fuel lines?

what do I use to seal fuel line npt fittings with?

fumplet. Im workin on a carbed fuel system that Im using an aftermarket electrical can style fuel pump from autozone.
CJ_1080. Use pipe thread sealant from permatex, or regular liquid thread sealant.
KIAMBU. ...
KIAMBU. ...
fumplet. ...
68NovaSS. ...
Overdriv. ...
cobalt327. ...
fumplet. ...
fumplet. ...

More items...

How to repair fuel lines?

Tools to Repair a Metal Fuel Line

Place a drip pan under the area to catch any fuel that drips from the line once cut.
To prevent constant dripping, use a small piece of rubber tubing with a block off the screw.
Remove the broken fuel line using the tubing cutter. ...
Purchase the necessary length of fuel line and one compression fitting if replacing the line to the fuel filter. ...

More items...

What can I use for fuel line fittings?

PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process. PTFE Braided Hoses require Special Fittings.

How do you make a fuel line fitting?

6:2518:58How To Make A Stainless Steel Fuel Line Using AN Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the line out of the vehicle. And you can see right there that I went ahead and took someMorePull the line out of the vehicle. And you can see right there that I went ahead and took some masking tape and wrapped it around the hose where I'm going to cut now there's a reason for that.

What size fuel lines do I need?

Recommended Size, Based on HorsepowerRecommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•Sep 16, 2017

Are fuel lines easy to replace?

Replacing the fuel hose on your vehicle is going to take time and patience, and it could require getting underneath the car. It's also going to take the right tools for the job.

How do you size an fitting?

AN Fittings and Hose Sizes ChartAN SizeHose / Tube O.D.SAE Thread Size-21/8 in.5/16 in.-24-33/16 in.3/8 in.-24-41/4 in.7/16 in.-20-55/16 in.1/2 in.-209 more rows•Feb 25, 2020

How do you flare a fuel line without a tool?

0:584:11Fuel Line Flares for CHEAP (Hydraulic fuel line tool NOT needed)!YouTubeStart of suggested clipEnd of suggested clipSo we have it in the 3/8 hole. And then you basically clamp these down you put this in a vise orMoreSo we have it in the 3/8 hole. And then you basically clamp these down you put this in a vise or something along those lines because gonna need to use a decent amount of pressure normally.

Does length of fuel line matter?

Does size really matter when it comes to fuel lines? According to the fuel delivery system experts at Fuelab, it does. It's because fuel line size and length have a direct effect on the amount of fuel pressure drop your fuel system will experience.

Can your fuel lines be too big?

Actually you can have too big a fuel line...if the line is too big and your car accelerates hard yet you don't have a massive fuel pump, you will have the additional weight of the fuel in the line pushing back and fighting the fuel pump which can cause cavitation.

Does fuel return line size matter?

Fuel Return Line Size and Installation The Fuel Return Line should be at least the same size, or one size larger than the supply. Make sure there are no sharp bends or kinks. The return line should direct fuel close to the bottom of the tank and away from the pickup.

How do I remove a rusted fuel line fitting?

0:022:00How to Remove a Rusted Fuel Line Connector - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf there is excess rust around the quick connect fitting you may be able to free it up by sprayingMoreIf there is excess rust around the quick connect fitting you may be able to free it up by spraying around the connection. And working the line back and forth.

How long does it take to do fuel lines?

Fuel line replacement duration is from 2 hours to 6 hours and can be complicated because many mechanical parts need to be removed. The fuel of the car present in the fuel pump transfers fuel to the engine with the help of a supply fuel hose.

How much does it cost to replace fuel lines in a car?

Most cars have a metal line that runs the length of the car with rubber fuel lines connecting at either end, one at the fuel tank and the other to the engine. Fixing a leaking fuel line is a simple task for a repair facility and costs between $60 and $120.

Top Brands

Plumb it with Summit, and you’ll shop from the top name brands in high performance fuel solutions. You’ll find manufacturers like Russell Performance, FAST, Edelbrock, HyperFuel,...

Tanks Inc. LS-LINE-KIT - Tanks Inc. GM LS Fuel Line Kits

Fuel Line, GM LS, Push Lock Type, -6 AN Diameter, 25 ft. Length, Black Anodized Aluminum Fittings, Kit

Holley 526-10 - Holley EFI Fuel System Plumbing Kits

Fuel System Pump Plumbing Kits, Holley EFI, 3/8 in. Diameter Rubber Hose, 40 ft. Length, Mounting Clamps, Black Anodized Aluminum Fittings, Kit

Holley 526-9 - Holley EFI Fuel System Plumbing Kits

Fuel System Plumbing Kits, Holley EFI or Sniper EFI, 3/8 in. Diameter Rubber Hose, 20 ft. Length, Clamps, Black Anodized Aluminum Fittings, Kit

Tanks Inc. LS-LINE-KIT45 - Tanks Inc. GM LS Fuel Line Kits

Fuel Line Kit, GM LS, Push Lock, -6 AN Line Diameter, 25 ft. Length, Aluminum Fittings, Black Anodized, Kit

Tanks Inc. U-LINE-KIT45 - Tanks Inc. Universal Fuel Line Kits

Plumbing Kit, Push Lock, -6 AN, 25 ft. Hose, Black, 45 Degree Fittings, Kit

MSD Ignition 2922 - MSD Atomic EFI Fuel Return Line Kits

Fuel Return Line, Atomic EFI, Rubber Hose, 3/8 in. Diameter, 15 ft. Length, Regulator, Kit

Tanks Inc. LS-LINE-KIT - Tanks Inc. GM LS Fuel Line Kits

Fuel Line, GM LS, Push Lock Type, -6 AN Diameter, 25 ft. Length, Black Anodized Aluminum Fittings, Kit

Holley 526-5 - Holley EFI Fuel System Plumbing Kits

Fuel System Pump Plumbing Kit, Sniper EFI, 80 gph Pump, 20 ft. Vapor Guard Hose, Pre and Post Filters, Earl's Fittings, Kit