Why choose auto hoses Australia?
As a mobile hose service, Auto Hoses Australia is the only mobile hose service which specialises in automotive hoses and fittings. Our vans manufacture hoses and pipes for most makes and models of vehicles onsite, saving you time and money.
What is a petrol hose?
Composite Hose Supplier Across Australia The PETROLMASTER range is designed specifically to keep up with the growing demands of the petro-chemical industry. This petrol hose is composed of polypropylene film and fabric construction which effectively handles hydrocarbon based products.
What are the sizes of fuel hose fittings?
Gates Flexible Filler Neck Fuel Hose 2.25in x 3ft - ID… Gates Fuel Hose 5/16in - ID 0.3125in / 8mm - Per Metre… Gates Fuel Hose 3/8in - ID 0.375in / 9.5mm - Per… Goss Fuel & Emission Hose (3/8) 10mm x 5m -… Goss Fuel & Emission Hose (3/16) 5mm x 5m… Champion Brass Hose Fitting Joiner 1/4In. - HC2
Are fuel hoses resistant to acids?
The hoses are resistant to most acids, alkalis and solvents. Our commitment to producing the best quality hoses is what has seen us become the leading suppliers in Australia of aviation fuel hoses, chemical hose pipes, petrol hoses and much more at Plascorp.
What hose can you use for fuel?
SAE 30R10 Submersible Hose Submersible hose is specifically designed for use in fuel tanks. You'll typically find it on in-tank fuel pump modules. It has special layers that prevent the inner liner from becoming saturated with fuel.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
What kind of hose can I use for diesel fuel?
The American Boat & Yacht Council (ABYC) recommends the Type B1 fuel hose for diesel-based applications. The Type A1 hose is the best option for gasoline supply. This hose is less permeable, highly durable, heat resistant and does not collapse under high pressure or vacuum.
Is a fuel line the same as a fuel hose?
A lawn mower fuel line hose and a fuel injection hose may look the same, but they are worlds apart. A fuel injected engine runs at a much higher fuel pressure than a carbureted one does. So, if your vehicle is fuel injected, you need fuel injection hose.
Is silicone hose OK for fuel?
One of the things we find gets asked often is can your silicone hoses for used for fuel? The simple answer is no, standard silicone hoses are porous and therefore not suitable for oil or fuel.
Can you run rubber fuel lines?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
What is the best metal for fuel line?
Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.
What is the best type of fuel line?
The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.
Is there a difference between diesel and gas fuel line?
Diesel fuel is thicker than gasoline, and as such provides more power and mileage per gallon. Gasoline engines, on the other hand, are lighter and deliver higher performance than diesel engines. There aren't diesel engines in sports cars for much the same reasons there aren't gasoline engines in big trucks.
Can you use PVC hose for fuel?
Due to the nature of PVC and other plastics as well, they are not well suited to use for fuel gas or kerosene. PVC and other plastics deform easily in high temperature environments, and may leak or rupture.
Can you use air hose for fuel line?
do not use an air line for gasoline.
What PSI is a car fuel line?
Required fuel pressure can vary depending on your vehicle's engine and fuel system. Carbureted engines may require as little as 28 kPa (4 PSI), while modern multipoint fuel injected high-performance engines can require as much as 414 kPa (60 PSI).
Hose and Reel Innovation for the Army
For the Australian Defence Force who often move quickly between locations, building a permanent fuel line to a set location is not a possibility. The manoeuvrability and the changing nature of the battlefront add to the challenge of having a large volume of fuel near the frontline.
Your job. Our Passion
Crusader Hose has the capability to customise and produce hose solutions that meet the specific needs of local industry sectors. We are passionate about developing world-quality layflat to suit many applications.