For Frigidaire owners, fixing this problem ranges from simple do-it-yourself approaches to a more involved process, depending on the cause. One of the most common culprits behind the light bulb not performing properly is the fact that the bulb has simply burned out and needs to be replaced.
Full Answer
Why is the light on my Frigidaire refrigerator not working?
Common solutions for: Frigidaire Refrigerator light not working 01 - Light Assembly The light assembly might be defective. Some manufacturers don’t sell the light assembly components separately, and instead require you to purchase the light assembly.
Does Frigidaire have a service manual for light bulbs?
Speaking of manuals, realize that most Frigidaire models' warranties only cover manufacturer's faults and will not cover lighting issues unless it's a switch connection problem. Calling a service repairman to replace the bulb for you or to check the switch will more than likely result in service charges, which can be expensive.
Where is the light switch on a Frigidaire refrigerator?
Chances are if you've replaced the bulb and the light isn't coming on, the switch may be stuck down in the frame of the fridge. Locate this switch by looking inside the fridge's door frame, near where the door hinges -- the switch should be located someplace underneath the first set of hinges.
Do Frigidaire refrigerators make noise?
The compressors in Frigidaire refrigerators run at a lower capacity than those in other brands. The motor and fan system is quieter than most refrigerators, but there are still some noises that you might hear from time to time. The refrigerator motor is the component in the refrigerator that cools and circulates the air.
Why is my Frigidaire fridge light not working?
The light bulb might be out. Replace the light bulb before replacing any of the other parts associated with the light bulb. To determine if the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity when activated, replace it.
Why won't my refrigerator light come on?
If your refrigerator light is not coming on, it may be that the bulb has reached the end of its lifespan and has burned out. Check the bulb to see if it has a dark area in the bulb or has a broken and loose filament. When you shake the bulb, you may hear a rattling noise if the filament inside is damaged.
How do I reset my Frigidaire Gallery refrigerator?
Press the Power Cool and Power Freezer buttons at the same time, on the display panel. Hold the buttons for a short time. The refrigerator will be reset and the fridge will start cooling again.
Where is the reset button on the Frigidaire Gallery?
0:041:53How Do I Reset My Frigidaire Refrigerator? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHow do I reset my Frigidaire refrigerator. If you are referring to a confused Control BoardMoreHow do I reset my Frigidaire refrigerator. If you are referring to a confused Control Board unplugging it and plugging it back in is the smart appliance equivalent of a reboot.
Do refrigerators have fuses for lights?
If the fuse is blown, it can prevent the refrigerator light from working. Check the circuit breaker or fuse box that controls the flow of power to the machine. If the fuse is damaged or blown, replace it with a new one.
How do you tell if fridge is broken or light is out?
Well, there are a few telltale signs that your refrigerator is broken....Keep reading to find out!It's Not Cold Enough. Are you not feeling a chill when you open your fridge? ... Your Food is Spoiling Quickly. ... There's Condensation. ... Ice Is Building Up in the Freezer. ... The Motor is Hot. ... It's Loud. ... There's Water on Your Floor.
How do I run diagnostics on my Frigidaire Gallery refrigerator?
0:2312:37Running Diagnostics(Test Mode) On A Frigidaire Gallery Side ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to put it in the diagnostic mode you're going to use the freezer. Down and up arrows you're goingMoreSo to put it in the diagnostic mode you're going to use the freezer. Down and up arrows you're going to press them both simultaneously for up to 10 seconds.
How do I restart my fridge after a power outage?
1:372:45Refrigerator Problems After Power Outage - YouTubeYouTubeStart of suggested clipEnd of suggested clipModel you may need to turn it back on by touching the control panel power button on other units youMoreModel you may need to turn it back on by touching the control panel power button on other units you can put it on power freeze or extra ice to kick it into acting.
How do you unlock the control panel on a Frigidaire refrigerator?
0:240:52How to use the control lock on your refrigerator - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd here's how it works you push the lock button for three seconds. And now your controls are lockedMoreAnd here's how it works you push the lock button for three seconds. And now your controls are locked nothing will happen to unlock it you hold the button for three seconds.
How do I reset my Frigidaire Gallery freezer?
When you're resetting your Frigidaire freezer, unplug it from the wall for 15 to 20 minutes and then plug it back in. Next, hold down the alarm reset button for three seconds and then press the down arrow three times and the up arrow once. The last step is to select the temperature you would like for your freezer.
How do I reset my Frigidaire freezer after a power outage?
Simply hold the reset button down for 1-2 seconds. Sorry, there was a problem. Please try again later. Freezers will usually reset themselves.
Where is alarm reset on Frigidaire refrigerator?
You can still stop the alarms when they sound by fixing the problem that caused them or pressing the "set" or "alarm reset" button on your unit. On upright refrigerators and freezers, you'll find this button on the top right side of the control panel on the front of the unit.
Why is my refrigerator light not working?
One of the most common is when the bulb inside the fridge won't come on when you open the door.
How does a fridge door work?
Fridge doors work because of a small pressure plated switch that pops up when the door is open; when it's closed, the switch is repressed. Chances are if you've replaced the bulb and the light isn't coming on, the switch may be stuck down in the frame of the fridge. Locate this switch by looking inside the fridge's door frame, ...
Can a Frigidaire door be removed?
The receptor switch underneath the pressure plate may be experiencing a bad connection. This means the door needs to be removed and the connector needs to be fished out and re-wired with a new one. Consult the manual that came with your particular Frigidaire model concerning service calls to local Frigidaire service centers.
Does Frigidaire warranty cover lighting?
Speaking of manuals, realize that most Frigidaire models' warranties only cover manufacturer's faults and will not cover lighting issues unless it's a switch connection problem.
Frigidaire Refrigerator Not Working After Power Outage
If your refrigerator is not working after a power outage, the following are possible causes:
Frigidaire Refrigerator Water Dispenser Not Working After Replacing Filter
The following are possible causes why your Frigidaire refrigerator water dispenser is not working after you replaced the water filter:
Frigidaire Refrigerator Auger Not Working
If your auger isn’t working, the motor could be the problem. To check if this is the case, open the freezer door, remove the ice bucket from the ice chamber, and press ‘ICE’ on the display panel.
Frigidaire Refrigerator Water and Ice Not Working
The following are possible causes why your Frigidaire refrigerator water and ice dispensers are not working:
Frigidaire Refrigerator Water Not Dispensing But Ice Is
If your Frigidaire refrigerator is not dispensing water but dispenses ice, the inlet valve may be faulty. And if the water pressure is lower than 20psi, it might affect the valve.
Frigidaire Refrigerator Ice Maker Not Working But Water Does
If your Frigidaire refrigerator ice maker is not working but dispenses water, the following are possible solutions to the problems:
Frigidaire Refrigerator Buttons Not Working
If your Frigidaire refrigerator buttons are not working, check the following:
1. Frigidaire Refrigerator Freezer is Not Cold Enough
You may have noticed that your new Frigidaire Refrigerator Freezer is not as cold as you had hoped.
2. Temperature fluctuations
Frigidaire refrigerators are famous for having temperature fluctuations that can be as much as 18 degrees Fahrenheit.
7. Frigidaire Fridge Leaks from Bottom or Sides
You can easily get panic if you see your refrigerator is leaking water. But, don’t worry, it is common for the refrigerator side or bottom to leak water.
8. Noise Issues
The compressors in Frigidaire refrigerators run at a lower capacity than those in other brands. The motor and fan system is quieter than most refrigerators, but there are still some noises that you might hear from time to time.
Light Socket for Frigidaire FRS23H7CSB2 Light not working
Step by step instructions on how to replace a Light Socket for Frigidaire FRS23H7CSB2 Light not working #AP5630701. Read More...
My Repair & Advice
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works.
My Repair & Advice
Ordered a new light socket. Was exactly like the old one. I removed the old one, installed the new one and it works perfectly.
My Repair & Advice
Replaced the light socket. Was very easy. Saw the Appliance Parts Pros video on You Tube which was very helpful. Took around 5 minutes. Working fine now.
Light Switch for Frigidaire FRS23H7CSB2 Light not working
Step by step instructions on how to replace a Light Switch for Frigidaire FRS23H7CSB2 Light not working #AP2116563 for Read More...
My Repair & Advice Featured Story
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try.
My Repair & Advice
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works.
Frigidaire 242115239 Board-Main Power (AP5607547) - AppliancePartsPros.com
thanks there is a dangling white little sensor (thermistor?) in the fresh food ice maker that has a cut wire as well. Could this have shorted something? The Wire is chewed up almost like it got pinched or tangled in the augur/ice.
Frigidaire 241816602 Motor-Auger (AP5330823) - AppliancePartsPros.com
Is there anything else I can check prior to ordering this, I feel like im just throwing parts at this fridge. Is it normal for the ice cube tray, augur motor, and main board to all fail?
Faulty Main Control Board
The control board is basically the brains of your fridge, and is responsible for controlling the compressor, the fridge fans, and other important parts.
Tripped Circuit Breaker
No doubt you’re also familiar with what a circuit breaker is, but if you aren’t, a circuit breaker is basically a resettable fuse that exists to prevent a connected electrical circuit from overloading.
Electrical Outlet Issues
You know what an electrical outlet is. You plug an electronic device into one of them, power runs from the outlet to your device, and the device works. Couldn’t be simpler.
Faulty Compressor Start Relay
The compressor start relay is an electrical device that the compressor needs in order to run. The start relay works on kind of the same principle as a starter motor in a car; it gives the compressor a boost of power which it needs in order to start up.
Faulty Temperature Thermostat
Your fridge has a thermostat that monitors the temperature inside the fridge, as you might expect. When the thermostat senses that the temperature is getting a bit too high, it sends a signal to the compressor telling it to start up.
Faulty Compressor
The compressor in your fridge basically acts like a pump for the refrigerant inside. It increases the pressure of the refrigerant and forces it through the tubing of the system.
Faulty Defrost Timer
Most modern fridges have defrosters intended to prevent frost from forming on certain parts of the fridge that need to remain frost-free. This defroster works on a timer which tells it when to turn on and off.