Spin the dial clockwise a few times to reset the lock and set it at 0. Apply upwards pressure on the shackle and turn the dial clockwise. The lock will catch several times, allowing for slight movement back and forth between two numbers. How do you fix a combination lock?
Full Answer
What if I forget the combination to my bike lock?
If you ever forget the combination to your bike lock, here's how to open the lock—without any tools required. A word to the wise: You might also consider getting a more secure kind of lock for your bike.
How do I unlock my bell lock?
Always be sure to write down your combination and put it somewhere safe, in case you forget it at some point. Use your Bell lock's current combination to unlock it. Hold the lock so that its numbers are facing you. Look at the top of the lock, and you will notice a red-coloured tab.
Do combination cable locks work on bicycles?
While this is not guaranteed to work on all combination cable locks for bicycles, since designs are all slightly different from manufacturer to manufacturer. But who knows, you might get lucky and save your lock from bolt cutters. Don't Miss: Open a Door Lock Without a Key: 15+ Tips for Getting Inside a Car or House When Locked Out
Is it easy to crack a rotary bike lock?
All you need is a bit of patience and you'll have your figure out your combo in no time. Also, it should also go without saying—don't be a jerk and use this to steal bikes. And if it's this easy to crack a rotary bicycle lock, then maybe you should just upgrade to a stronger lock anyway (remember your code or key this time).
How can I unlock my bike lock if I forgot the code?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis first dial ah. And right there. So I got that. And let me see. And write those combination.MoreThis first dial ah. And right there. So I got that. And let me see. And write those combination. Seven five nine eight and that's how you open one of these combination locks.
How do you reset a bell bike lock combination?
0:452:08How to change the combination on a Bell Bike lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you're trying to do is you're trying to get this red side of it down. And over and you'll hearMoreWhat you're trying to do is you're trying to get this red side of it down. And over and you'll hear it pop and when it pops that's when you can reset the bike lock.
How do you figure out a bike lock combination?
0:593:39Cracking a combination lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull on the two ends. Not even very hard just to put some pressure in theMoreAll you have to do is pull on the two ends. Not even very hard just to put some pressure in the chamber. And then starting with the number wheel at the open. End just go through one by one.
How do you reset a 4 digit combination lock if you forgot the code?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
How do you unlock a 3 digit lock?
2:233:56How to Reset the Combination to a 3 Digit Master Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd try to push it down it won't push down you really need it to be at the combination. Before youMoreAnd try to push it down it won't push down you really need it to be at the combination. Before you lock it. And then you basically change the combination. And then it's locked.
How do you open a combination lock with 3 numbers?
0:000:59How to Open a Combination Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo open up your combination lock you will first need to know the code for this lock the numbers areMoreTo open up your combination lock you will first need to know the code for this lock the numbers are 24 30 and for first turn your dial three times to the right.
What is Bell Sports bike lock?
Bell Sports sells many products for the bicycle enthusiast, including locks. Their combination bike lock allows you to set your own four-digit combination. Some people might find the process of resetting a bike lock tricky, but practice the steps below a few times, and you'll get the hang of it.
How to lock a bike with a new combination?
Look into the opening of the lock (the part where the lock opens when you unlock it). You should see a black-coloured tab down in there. You will have to press this tab hard until you again hear a clicking sound. Lock your bike lock. Open it with your new combination.
What is a bike lock?
A bike lock is one of the most important accessories to have if you are a bike owner. Sadly, there are a lot of them who tend to neglect the importance of it. Also, some owners tend to be frustrated in having to lock the bike all the time everywhere they go. They only remember the importance of locking the bike if they already lost ...
Why is it important to reset a bike lock?
The most important thing is to secure your bike properly to avoid thieves from stealing your precious bike anytime you left it unattended to a particular place or area.
How to reset a kryptonite bike lock?
If you have a kryptonite bike lock with a combination of numbers, you can also reset it just in case you want to. Here’s how to do it: The first step is to familiarize your kryptonite lock and its type of model. Make sure to check on the numbers that will reset located on the front of the lock. Then you need to put the numbers or code to unlock ...
How to open a lock with a set dial?
The first step is to open the lock using your original combination or using the preset combination provided by the manufacturer if your lock is new. After putting the numbers, pull the lock away from the housing to open it. Once it is open, you will see on the inside a dial that comes with the word “set”.
How to change the number combination on a lock?
Change the new combination of numbers for your lock by using the arrows found on the side of the dial. After that, you need to push the cable button in while pulling the cable head out for a couple of inches.
Do you know the secret code of a bike lock?
If you have intentionally shared your secret code with someone who borrows your bike, the need to change to a new combination is needed . This is to ensure that only you or the people that you tested only know the secret numbers of your lock. The list above is the most common reason why it is a must ...
Can a bike lock be stolen?
Mind you, those thieves know those preset numbers and if you fail to reset the lock, your bike can be stolen easily.
Step 1: Set Starting Point
Get all of the same digits to line up at the starting position. You can start with any digits, but it just makes sense to start at 1. The method here is to tug at each end until you see a gap form. For example, when the first number has the correct digit, you'll notice a small gap between the first and second slots.
Step 2: Continue to Tug & Change Digits Until You See a Gap
As you can see below, once the first number reaches 3, you can notice a small gap when tugging at each end. This means we have our first combination digit.
Step 3: Use Tug Method to Find Rest of the Combination
Go down the line until you each the final number. Here, when you get the correct digit and pull on each end, your lock will open up. Pretty simple, right?
Check Out the Video
For more information, check out the full video guide below from YouTube user diilonp23. While this is not guaranteed to work on all combination cable locks for bicycles, since designs are all slightly different from manufacturer to manufacturer. But who knows, you might get lucky and save your lock from bolt cutters.
Step 1: Understand What's Inside
inside there are four rotating plates with a notch the shackle to slide through. When you scramble the lock, the plates slide to block the shackle from coming out.
Step 2: Tension the Lock
I wrapped the lock around a chair (pictured) sliding the cables apart increases tension in the system. you need tension to press the teeth of the shackle against the lock discs. this lets you feel the shape of the discs better and decide when one of the teeth isn't pressed against steel disc and is just hanging out in open air.
Step 3: Rotate the Tumblers
Start with the tumblers that are hardest to rotate first. these have the most tension. tension makes the disc's shapes easier to determine. Now, there's a couple of things to look for.
Step 4: Have Nerves of Steel
When you get it, you'll be concentrating hard and i can guarantee the lock will fly apart. Its going to startle you. Don't make this remove the idea of setting the combo to something you'll remember from your head.