Full Answer
How to clear the PCM memory on a Ford F150?
SYNC with MyFord Touch® Master Reset instructions.
- Using your system’s touchscreen, touch Settings, then touch System.
- Navigate to the second page of the System menu, then touch Master Reset.
- When SYNC prompts you, touch “ Yes ” to continue.
- “Performing scheduled system maintenance” appears on the touchscreen for several minutes.
- The home screen reappears. ...
How to replace door striker Ford F150?
How to replace a loose or crooked door striker on 19987 Ford F150 pickup truck. step 1 :Removing the Door Striker. Remove the two T35 Torx screws from the striker. Remove the striker. step 2 :Installing the Door Striker.
What is the Ford F150 battery reset procedure?
How to Reset Battery Light on Ford F150?
- Turn off all the system which draws power. ...
- Check for corrosion. ...
- Proper cleaning of the battery terminals. ...
- Secure the battery terminals clamps. ...
- Reset the battery cables. ...
- Recharge your truck battery. ...
- Fix the faulty alternator. ...
- Replace the alternator belt. ...
- Reset battery light through the truck computer system. ...
- Test for battery reset. ...
How to replace F150 blend door?
Tools Needed
- Screwdriver
- 1/4" socket
- 3/8" socket
- Small pry bar
How much is a PCM for a Ford f150?
Ford F-150 Powertrain Control Module Replacement Cost Estimate. The average cost for a Ford F-150 powertrain control module replacement is between $688 and $876. Labor costs are estimated between $71 and $89 while parts are priced between $618 and $786.
How much does it cost to fix my PCM control for my Ford?
The PCM itself will cost somewhere between $500 – $1,200 depending on your car's make and model. Meanwhile, labor will cost another $120 to install and program the PCM. So, you can expect at least $600 for a PCM replacement.
How much is it to replace a PCM?
The PCM is a computer, and computers aren't cheap to replace. That's why the average PCM replacement cost is anywhere between $800 and $1,500, depending on the car model and labor costs. Even worse, this is almost all in the cost of the PCM itself. Labor typically only runs between $75 and $100.
How do you know if your PCM is bad?
7 Common PCM Failure SymptomsYour 'Check Engine' Light is On. ... Your Car Won't Start or Starts Roughly. ... Sudden Loss of Gas Mileage. ... You Failed Your Emissions Test. ... Your Engine Stutters or Stalls. ... Erratic or Random Shifting. ... You're Receiving a PCM-Related Error Code. ... What to Do If You Experience PCM Failure Symptoms.
What causes PCM to fail?
Water is the primary element to avoid as exposure to it can render the PCM irreparable. Other environmental factors that could lead to PCM failure include thermal stress due to excessive heat and excessive vibration that causes sensitive parts to fail.
Is Ford updating PCM free?
A Ford PCM update will usually be free of charge if it is covered by an in-date warranty. If the PCM is a replacement or if it is not covered by a warranty, then getting it updated will cost between $80 and $150 for labor.
Why are PCM so expensive?
PCM Replacement Cost Because some powertrain control modules are much more complex than others, prices can vary a lot from one vehicle to another.
Does a new PCM need to be programmed?
PCM Reprogramming is also necessary to change the engine idle speed, spark timing, fuel mixture or other emission control functions. PCM Reprogramming may be required to resolve a hot or cold starting issue, idle roughness, stalling, or an emissions failure.
Is the PCM the same as ECM?
The main difference between the two is that the ECM controls specific parts of the engine, regulating and sending commands. While the PCM is used in newer models to control almost all engine functions.
Can I drive with a bad PCM?
Bad PCM shouldn't be a cause for worry, though, and many states allow drivers to pass checks despite the engine light is on. Nonetheless, the sooner you fix it, the better your engine will perform and you can also protect other parts and systems that could get compromised.
How do I reprogram my Ford PCM?
6:3716:33How to Reprogram Ford PCM ECM reflash "Uninstall Install aftermarket ...YouTubeStart of suggested clipEnd of suggested clipWe're just going to go to module programming. And we're going to go to powertrain control module.MoreWe're just going to go to module programming. And we're going to go to powertrain control module. And what it's going to do is it will actually automatically check to see. If.
How do I know if my Ford ECM is bad?
Your Engine Stutters or Misfires A rich fuel-to-air ratio can cause your engine to misfire, while a lean ratio can cause stuttering when it periodically fails to ignite. Similar problems can be caused directly by an improperly-adjusted engine timing. Either way, it's possible that your ECM is causing the problem.
Can you repair a PCM?
Typically, PCMs are not rebuilt in the same way that alternators and water pumps because there are no mechanical parts that wear out. Remanufacturing a PCM generally means testing the computer, isolating and repairing any faults that may be found, then retesting the computer to make sure everything works correctly.
How much does it cost to fix powertrain malfunction?
Depending on the type of vehicle, the powertrain repair cost can be anywhere between $60 and $2500. A simple routine service can be the difference between a fully functioning vehicle and a vehicle that needs a complete transmission rebuild or replacement.
How do you reset the PCM?
In order to perform a PCM hard reset: Press and hold the PCM Info button for approximately 10 seconds until the PCM reboots.
How do I reprogram my Ford PCM?
6:3716:33How to Reprogram Ford PCM ECM reflash "Uninstall Install aftermarket ...YouTubeStart of suggested clipEnd of suggested clipWe're just going to go to module programming. And we're going to go to powertrain control module.MoreWe're just going to go to module programming. And we're going to go to powertrain control module. And what it's going to do is it will actually automatically check to see. If.
How much does it cost to replace a PCM?
A typical pcm replacement cost comes to between $500 and $1,500 on average.
What is PCM in a car?
The powertrain control module, usually abbreviated just PCM, is an important component in your car that consists of the engine control unit and the transmission control unit, and is in charge of analyzing and gathering various data signals. In some cars, there are multiple computers, and with other cars, there are just a few. The PCM controls more than 100 factors in your car, and for that reason, is very important – and expensive. A typical pcm replacement cost comes to between $500 and $1,500 on average.
What is the best way to know if your PCM is failing?
Poor performance. One key sign of a failing PCM that can cause the total pcm replacement cost to be much higher is poor performance . Just like a person, if you are tired you can’t expect to perform at your optimal leel in school, work, or your personal life the same goes with your engine and your powertrain control module.
What is powertrain control module?
By this point, we know that the powertrain control module is a key piece of equipment in your vehicle. It is in charge of numerous functions and receives data from a wide array of sensors, being put in charge of gathering and analyzing the data from multiple sources. Two main components of your car, the engine control module and the transmission control module, are dependent on the powertrain control module, since it is in charge of monitoring these systems for proper function. Without these working correctly, the total pcm replacement cost will be much higher.
How much does it cost to replace a PCM on a Honda accord?
The cheapest option comes to the Honda Accord, with the total pcm replacement cost coming to between $648 and $850, with the labor being between $80 and $103, and the parts costing between $568 and $747.
Is PCM repair expensive?
Because of this, the repair of the PCM and a potential pcm replacement cost is very expensive. In addition, the prices can vary depending on what kind of car you have, since the parts vary greatly. For example, an older car that is more basic, like a standard Ford, will not have as high of a pcm replacement cost as a more luxury car brand, ...
Is PCM a part of car?
As we know now, the PCM is such a crucial part in your car – without the powertrain control module working, the engine control unit, the electronic control module, and the transmission control module will not be able to function properly. Because of this, the repair of the PCM and a potential pcm replacement cost is very expensive.
PCM in Car: Everything you need to know
Decades ago, it was hard to detect the location of every vehicle fault because many automotive systems were manual. Now it has become easier to track malfunctions with the computerization of most vehicle systems.
Top 9 Most Common F150 PCM Failure Symptoms
A powertrain control module can work abnormally because of several factors. I will discuss some of those factors later. For now, see some of the usual F150 computer problem signs below.
What Triggers the PCM Failure Symptoms?
The powertrain control module can get damaged by corrosion, vibrations, short-circuiting, overheating/thermal stress, and voltage overload. These are factors that affect other vehicle electronics. Generally, the common reasons are environmental factors and voltage overloads. Expect a failure symptom to manifest in the case of any of those triggers.
How to Fix a PCM-related Issue
The first step in fixing a powertrain control module-related problem is to test it. This lets you ascertain that the PCM truly needs attention and not another unit or system. See if it needs a reset before opting for plan B, carrying out a swap.
PCM Replacement & Reprogramming Cost
The total cost of replacing a Ford F150’s powertrain control module is between $700 and $1,500. This depends on the vehicle model and labor charges. Some PCMs are more complex than others, and luxury F150 trucks would be more expensive than regular ones. A seasoned expert would charge higher than a professional with lesser experience.
Final Thoughts
I hope you found the answers to many of your bugging questions about Ford F150 PCM failure symptoms. Now you know what to do when you notice any of the top 9 most common PCM problems mentioned. You have also realized just how important the powertrain control module is.
Description
This is a repair and return service for Ford F150 (2004-2008) ECU | PCM Computer Repair, years 2004 2005 2006 2007 2008 . When you receive your rebuilt part back from us it will be plug-n-play and not need any additional programming.
Will this service fix my problems?
A full diagnostic check should first be performed to eliminate all other possible causes for your symptoms, even if the symptoms match those specified on the common fault description. If you send a good working unit because of misdiagnosis and after we test the unit and find no issue/faults, then you will only be responsible for a $39.99 testing fee and shipping. IMPORTANT! If you are not sure that this part is the cause of the fault then we recommend that you do not go ahead with this purchase and instead seek further professional advice and diagnosis..
The Cost of Ford PCM Updates
The PCM is a software-based system. Car manufacturers provide regular updates to this software.
What Is a PCM Update?
The powertrain control module is one of the most essential systems on any vehicle, including Ford models. It is the main computer on your vehicle, receiving data from the engine control module and the transmission control module.
What Does the PCM Do?
The PCM serves various roles and performs numerous tasks across various systems. Here are the elements that are most impacted by PCM:
How Does a PCM Update Work?
When a PCM update is required, special tools will be needed to install it. This will include needing software that is specific to your car model and that should be downloaded before proceeding.
Signs that the PCM Needs an Update
You may be wondering how you’ll be able to tell when the PCM requires an update. Here are some signs that would indicate this procedure is necessary:
Can You Update the PCM Yourself?
If you don’t have any experience with it, a PCM installation can be highly complex. If any variable goes wrong during the process, it may require a PCM replacement, which will be more expensive than an update done by a professional.
How Long Does It Take to Update the PCM?
Taking the car to the dealership will get you the quickest update process. Updating the PCM will normally take an hour at most, barring any complications with the procedure.
BSE Engine Control Computer ECC1512
Your Ford F150 is fully capable of handling anything you ask of it and then some, providing the versatility and power you've always wanted in a pickup. What takes away from your power is a faulty engine control computer.
Reviews
Nothing works without your vehicle’s computer. It’s what tells the scanner what’s wrong.
1. Check Engine Light Turns On
The Check Engine symbol is your vehicle’s catch-all sign. It can come on for just about anything, especially for systems not covered by one of the other vehicle’s warning lights. Therefore, you do not have to fret when it comes on.
3. Low Gas Mileage
The PCM collaborates with the ECM and TCM to manage your fuel-to-air ratio and determines the best time to shift gears. If any of the systems aren’t working correctly, the gas mileage will deteriorate.
4. Emissions Test Failure
As discussed earlier, the PCM and ECM manage Ford’s fuel-to-air ratio. Suppose the mixture is extremely rich (excessive fuel compared to air). In that case, the gasoline/diesel will not completely combust and emit considerably extra elements and carbon monoxide than a properly-working engine.
6. Irregular or Random Shifting
One of the gravest Ford F150 PCM failure symptoms is improper shifting. It generally occurs due to a faulty sensor or water damage of circuits in your F-150’s PCM or TCM.
7. Receiving a PCM-Related Error Code
One of the obvious Ford F150 PCM failure symptoms is the PCM error code you receive. You can know the code through a reader device. If it is the first symptom of a problem, compliments! You have identified the issue before it could bring serious troubles.
PCM Replacement Cost
Knowing the PCM is such a crucial system, you would expect it to be expensive. Yes, it can be costly for some vehicles because certain PCMs are more complex than others.
What to Do If You Witness Ford F150 PCM Failure Symptoms?
If you’re facing one of these Ford F150 PCM failure symptoms, don’t fuss. The issue might not relate to PCM at all. It could be owing to a faulty sensor or a shorted wire.
How much does it cost to replace a PCM?
On average it costs about $300 to send out a PCM on most vehicles and have it repaired or about $600 to replace the PCM. This is in addition to whatever diagnostic charges were necessary to get to that point, which can be unpredictable.
What is PCM in a car?
The PCM is the main computer module the vehicle uses to run the engine management systems and control vehicle emissions. The PCM directly controls the fuel injectors and the coils, determining the fuel mixtures and timing based on sensor inputs and it’s basic programming. “PCM” stands for “powertrain control module”, ...
How much does it cost to replace a 2009 Nissan Altima?
A factory PCM costs about $950, or remanufacturing the unit costs about $250. This makes the job about $1070 using factory parts, or about $370 to remanufacture.
Why does my PCM misfire?
A misfire can be caused by a faulty low-side (ground) driver in the PCM, but that’s still the least likely cause in practice. Usually, diagnosis is only arrived at after coils and plugs are ruled out, engine compression is checked, fuel injectors and vacuum leaks are ruled out, and the camshaft is determined to be in good shape.
Why is PCM replacement so difficult?
Practically speaking, the main problems that arise during PCM replacement are related to the difficulties of diagnosis. All the information necessary isn’t always available, sometimes parts are replaced that aren’t entirely necessary, and sometimes the PCM is replaced when it doesn’t need to be.
Is PCM reliable?
A PCM typically has hundreds of tasks it must perform consistently and correctly, so while they are ordinarily very reliable and often last the life of a vehicle, there are many ways for one to fail. The PCM, like most computers, needs to keep cool, so most of the time it’s out in the open and pretty accessible.
Can you replace a PCM?
And in many cases, it ’s tempting to just replace the PCM rather than engage in complicated wiring checks, in spite of the PCM only rarely being the actual problem. Otherwise, the best strategy is often to focus down on one single thing the PCM should be doing but isn’t doing, and then rule out other possible causes.
How much does it cost to replace a PCM?
The PCM is a computer, and computers aren’t cheap to replace. That’s why the average PCM replacement cost is anywhere between $800 and $1,500, depending on the car model and labor costs.
What is PCM in engine?
The PCM is the brain of the power delivery unit in your engine. It controls various features, including ignition timing, fuel delivery, emissions, turbo boost pressure, idle speed, throttle control, and so much more.
What is a PCM problem?
If your vehicle is having problems shifting into different gears, then the PCM might be the problem. Your PCM controls everything that both your engine and your transmission does. So, if you’re having any issues with your powertrain, you might be able to trace it back to the PCM.
What happens if your PCM isn't working?
Poor Performance. Your PCM controls performance, so it makes sense that if it’s not responding correctly, that performance will suffer. The more screwed up your PCM, the more likely you’ll have multiple issues leading to poor performance. However, if just a single part of your PCM isn’t working correctly, you may only have poor performance ...
What does PCM do?
The PCM is programmed to tell each actuator what to do when specific commands are met – like when hit the throttle – and then it’s programmed to know what the acceptable readings are in response. When something isn’t working correctly, it shoots a warning to the driver through a check engine light.
How to tell if PCM is bad?
The first sign that your PCM is having issues is likely going to be a check engine light. The light could be for anything related to the powertrain. Just keep in mind that the problem is more likely with the sensor, wiring, or just about anything else.
Where is the PCM located?
PCM Location. The PCM is most often located in the engine bay near the fuse box or inside the car near the fuse box. It can often also be located under the front windshield behind some covers. There are a few different locations that the manufacturer can place your vehicle’s PCM, but the most common location is in the engine bay.