Is your ford car producing a rattling sound? It might signal that you need a cam phaser recall since the engine control unit can no longer control the variable cam phasers due to insufficient oil volume. However, you can cure the rattle problem by locking the variable timing and turning the phaser into a fixed timing gear or replacing the phasers.
Does anyone else get the recall notice for cam phaser Rattle?
Anyone else get the recall notice for a reprogramming of the PCM to fix the cam phaser rattle. Went into my FordPass app today when I saw the message come up.
Should Ford have paid to replace my cam phasers?
If it is a recall Ford should have paid for my cam phasers to be replaced. I had a 2017 with the 3.5 ecoboost, has a battle rattle on cold start and the program/update did nothing. I was quoted just under $2800 to replace the cam phasers and my extended warranty company denied the claim.
What happens if Cam rattle is not fixed?
If it doesn't fix the rattle, then the second part of the recall is to replace the cam phasers under an automatic extended coverage for this issue. heard this online don't know for sure.
Can You update the camshafts with a cold start Rattle?
They won't do the update unless you have the cold start rattle. If it doesn't fix the rattle, then the second part of the recall is to replace the cam phasers under an automatic extended coverage for this issue. heard this online don't know for sure. They won't do the update unless you have the cold start rattle.
What happens if you don't fix cam phasers?
Most phasers are designed to lock into position at base idle. But when a phaser fails, it may no longer lock into place, resulting in a rattling or knocking sound coming from the top-end of the engine. The noise is often most noticeable at idle when the engine is hot.
Did Ford fix the cam phaser problem?
It ranged all the way from the 2004 F-150 after its redesign, all the way into the next generation until they moved away from the 5.4, instead moving to the 5.0 that replaced it in 2011. Yep, that's right, they didn't fix the issue… they just had to replace it.
What is Ford cam phaser rattle?
The startup cam phaser rattle is due to the edge of the hole the locking pin sits in wearing down. The entire purpose of this pin is to lock the VCT gears in position so you don't get the startup rattle. Once the oil makes it up the gallery and into the VCT, it slams it into the cold idle position and the noise stops.
Are cam phasers covered under Ford warranty?
The Ford Factory Powertrain Warranty which is 5 years or 60K miles will cover the Cam Phasers.
What years did the 5.4 Triton have problems?
What Ford Models Use the 5.4 Triton?1997-2010 Ford F-150.1999-2004 SVT Lightning.1997-2014 Ford Expedition.1997-2014 Lincoln Navigator.2006-2008 Lincoln Mark LT.2000 Ford Mustang SVT Cobra R.2007-2012 Ford Shelby GT500 / GT500KR.2004-2006 Ford GT.
How do you check a Ford cam phaser?
0:082:48How to Check Cam Phaser Noise On A Ford 5.4 3V Triton EngineYouTubeStart of suggested clipEnd of suggested clipThey step on the gas and knocking goes away. So basically you're doing that when you're you'reMoreThey step on the gas and knocking goes away. So basically you're doing that when you're you're sitting still you're hearing for that knock to go away now whenever.
Why do Ford cam phasers fail?
What Causes Cam Phasers for 5.4 Ford Failed? Low oil pressure can't deliver proper power to the cam phaser at precise timing. It could be failure oil pump or dirty oil may lead to this problem. Clear oil makes sure the viscosity for the oil to generate proper oil pressure.
How do I fix my cam phaser?
The sure fix to phaser problems is to lock the variable cam timing by essentially turning the phaser into a fixed timing gear. The WMS Cam Phaser Lockout kit will solve the phaser issue permanently.
What causes cam phaser noise?
The cam phasers are used to advance and retreat cam timing. This is oil pressure controlled by variable cam timing solenoids. When commanded, the solenoids direct oil pressure to advance or retreat the timing. If the pressure drops due to a malfunctioning part, it will cause a knocking noise.
What is the Ford recall 21B10?
This program extends the warranty coverage of the engine cam phasers until January 1, 2023 provided the Repair Order (RO) date of Powertrain Control Module reflash under Customer Satisfaction Program 21B10 occurs on or before December 31, 2021.
How do Ford cam phasers work?
The cam phaser has two basic components: an outer sprocket connected to the timing chain and an inner rotor (connected to the camshaft) that varies the valve timing by adjusting the rotation angle of the cam. This inner rotor consists of a set of lobes, and oil fills the space between the outer housing and the lobes.
What is the factory warranty on a 2018 Ford F 150?
3 yr/36,000 mi basic, 5 yr/60,000 mi powertrain2018 Ford F-150 / Warranty