Standard Exterior Door Sizes
| Pre-hung Single doors | Pre-hung Double doors | Pre-hung Double doors | Pre-hung Double doors |
| Width (W) | Height (H) | Single door (W) | Double door (W) |
| 2′-6″ (30″W) | 6′-8″ (80″H) | 2′-6″ (30″W) | 2 x 2′-6″ (60″W) |
| 2′-8″ (32″W) | 7′-0″ (84″H) | 2′-8″ (32″W) | 2 x 2′-8″ (64″W) |
| 2′-10″ (34″W) | 8′-0″ (96″H) | 3′-0″ (36″W) | 2 x 3′-0″ (72″W) |
Full Answer
What are the typical exterior door dimensions?
WINDOWS:
- WINDOW 1 for kitchens below 100sqft - 3′ x 4′ (900 x 1200mm)
- WINDOW 2 for bedrooms ranging from 100 - 150 sqft - 4′ x 4′ (1200 x 1200mm)
- WINDOW 3 for Living/hall ranging from 150 - 200sqft - 5′ x 4′ (1500 x 1200mm)
What is the standard size of an exterior door?
Standard entry door measurements:
- Height: 80 inches (6 feet 8 inches)
- Thickness: 1 3/4 inches
- Width: 36 inches standard (30 and 32inches also available)
How to measure an exterior door?
This is necessary for the following reasons:
- Each manufacturer have it’s own standards and that might cause the actual doors to be slightly different.
- The frame thickness will be added to the door size.
- You will need about 1” in total width and height to be able to adjust and shim the door.
- The openings are not always square , so it is good to have a little extra gap. ...
What is the minimum height of an exterior door?
It must be side-hinged and offer a clear passage of at least 32 in. in width and 78 in. in height. There are more specifics outlined in the code, including from where to take these measurements; generally, the dimensions equate to a standard 3-ft. by 6-ft.-8-in. door.
How wide is a standard exterior door?
What is the standard door opening size?
How wide is a 36 inch door with two 14 inch sidelights?
What is the width of a prehung door?
What does it mean when a door swings left or right?
What are standard exterior door sizes?
80 inches by 36 inchesStandard Size for Exterior Doors The standard size for an exterior door is 80 inches by 36 inches which is 6 ft, 8 inches by 3 ft. 96 inches or 8 ft. is now very common for newer homes and stock exterior doors are also commonly available in 30 and 32-inch widths.
What should be the size of an external door of a residential building?
What should be the size of an external door of a residential building? Explanation: The generally adopted size of an external door of a residential building is (1.0 m x 2 m) to (1.1 m x 2 m). The adopted size of doors for bathrooms and closets is usually (0.7 m x 2 m) to (0.8 m x 2 m).
Does door size include frame?
Standard Door Frame Size The average measurement of 36 by 80 inches refers to the door panel itself, not including the frame. The frame extends beyond the panel, and is installed into the rough opening. The rough opening should be at least ¾ inch wider and ? inch taller than the door frame.
What is nominal door width?
For reference, standard interior door widths range from 24"-36" (finished opening). While a standard door height is 80" (finished opening). The difference between a rough opening and finished opening is usually 2-3 inches.
How to Order Custom Size Exterior Doors
While most doors come in a standard size, getting a custom size exterior door can really make your house pop while ensuring that everything fits properly. A door is a great way to increase the value of your home and nothing impresses more than having someone walk up your sidewalk to a brand new custom door.
Standard Door Sizes
A wide range of height options to select from, ranging from 80" to 96".
Custom Size Doors Available on Special Request
Choose from high quality hardwood materials like Mahogany, tropical hardwood and Knotty Alder in fiberglass or wood.
Nominal Sizes for Doors
A nominal size or trade size for doors is a size "in name only" used for identification. The nominal size may not match any dimension of the door, but within the domain of the door size. For example a 2’/8” wide door can any of the followings:
How tall is an exterior door?
By IRC building codes, exterior doors are required to be a minimum height of 80 inches. The standard exterior door size is typically 3 feet wide and 80 inches high. Examples of an exterior door include an entry door, back door, garage entry door, or fire/security door. In newer homes, exterior doors can be even taller, with a door height of 96 inches. Stock exterior doors can be readily found in widths of 30 inches and 32 inches, and the standard exterior door thickness is 1 ¾ inches.
What is the average door width?
Door widths vary more frequently, but you can find an average exterior standard door width of 36 inches, and an average interior standard door width of between 28 and 32 inches.
How wide is a closet door?
The average closet door has a width of 30 inches and a height of 96 inches, though sizes can vary widely. Bi-fold doors are common closet door types, which have two panels for a single door and four panels for double doors. Bi-fold doors are available in a range of sizes to fit your needs.
How wide is a sliding glass door?
For a sliding door or sliding glass door, the standard width and height can vary. You’ll find that these doors have an average height of 80 inches and an average width of 6 feet—but there is a wide range of door width sizes available to fit your needs, from 60 inches to 96 inches.
How wide is a medical room?
Rooms in medical facilities are required to be a minimum of 41.5 inches wide. When it comes to door height in commercial building codes, doors should be at least 80 inches tall. While there is a range of door sizes that fall within the IBC building codes, the. average door width is 36 inches, and the average door height is 80 inches.
What is the rough opening of a 24 x 80 door?
For example, if you have a door that is 24 inches by 80 inches, your rough opening will be 26 inches by 82 ½ inches. Standard door sizes vary in width, from 24 to 36 inches, but most are typically 80” high. If you have a 28” x 80” door, your rough opening will be 30” x 82 ½”.
What do you need to know when replacing a door?
When you are replacing or adding a door, the size of the door opening will help determine the door width and door height. You also need to consider the door jamb, the door frame, and any building codes before deciding on a replacement door or making any changes to your current door frame and door size.
How wide should a bedroom door be?
Now all you need to know is how to properly frame your door rough opening. So, if you have a bedroom door that is 30″ wide (which is considered a 2/6 or 2′-6″ door) just add 2″ to the width and frame it 32″ wide.
How high is a door frame?
The height is 80″ (which is considered 6/8 or 6′-8″) add 2-1/2″ to the actual door height and frame it 82-1/2″ high.
How far off the floor should I shim door jams?
If you are going to carpet the floor, shim the door jambs off the floor about 3/8″. This will allow carpet to be tucked under the jambs and usually leaves enough clearance so the door doesn’t rub on the carpet.
What are the dimensions of a front door?
The entry door, commonly known as the front door, is what most people consider standard for a residential building. They can be any measurement from 30 inches and up, and are available with any number ...
How wide are panel doors?
Framed and panel doors are the typical contoured doors most people expect to see as the main entrance to the house, with several different contours that add strength and cosmetic appeal to the design. There are different sizes available, but typically about 32-34 inches is appropriate on older houses whereas building which requires handicap access is going to have doors at least 36” wide.
What is an entry door grill?
Door grills are iron pieces as decorative enhancements or bars to allow glass doors to remain a sound door option without the concern of allowing unwanted entry by someone simply breaking the glass.
What is a double door with venting sidelights?
The double door with venting sidelights consists of two doors built into a single unit which allows for the use of one door on a daily basis or both can be opened like an invitation to guests or to allow room for bringing in furniture. There are thin windows on either side which are the same height as the door and can be opened to allow fresh air in.
What is a center swing outswing door?
Center swing outswing doors are the same, except they swing out of the house to allow room inside, and have specialty hinges to prevent a burglar from removing them with common household tools.
How wide is a center swing door?
Standard nominal measurements for such doors are 7-1/2 feet, 8 feet, or nine feet wide and either the standard 6’8” tall for most rooms or 8′ tall for rooms with raised ceilings.
What is a transom window?
Entry Door Front Door Sidelights and Transoms. A transom window, sometimes called transom light, is the horizontal window over a door. Clear glass is a bit odd in such an application, although it can be used with a curtain.
How tall is a door?
Height. Most interior and exterior door panels are 80 inches tall (or 6′ 8″) – this is the standard height called for by many building codes. Other common heights are 84 inches (7′) and 96 inches (8′). While custom doors vary in height, these are the ones you’ll see most often.
Why is it important to understand standard door sizes?
It’s critical to understand standard door sizes in order to not waste time or money when replacing yours. Read on to learn these dimensions, things to consider, and why you should leave installation to a pro.
What is rough door opening?
The rough door opening is the rectangular gap in the wall’s framing where the door will be. It is larger than the door panel to give room for the door frame.
How tall are closet doors?
Different types of doors also have different measurements. For instance, most interior passages will have doors 80 inches tall. But closets may have doors 78 inches tall. The same goes for widths.
How wide is a garage door?
Some main entrance doors may be as wide as 42 inches. Other entrances may be narrower. Back doors and doors into garages may be 32 inches or 30 inches wide. It’s also worth noting the 36-inch width is the smallest recommended to give access for a person with a disability.
How to measure for replacement door panel?
If you are replacing only your panel, simply measure from top to bottom and side to side. If your door is an average size, you can drop by any hardware store to find a replacement. However, if you are replacing both the panels and frame, you’ll need to do a little more work.
What is the only tool you need to measure a door?
The only tool you need to measure a door is a tape measure. But before you measure, let us explain the different parts from which your door is made. Panel. This is the part of the door that swings open and shut. It’s also called the slab. Frame. This is the rectangle-shaped structure that holds the panel.
What are the dimensions of a door?
Here’s the list. Click the following for dimensions of the indicated types of doors: 1 Front door dimensions and sizes 2 Interior door dimensions and sizes 3 Garage door dimensions and sizes 4 French door dimensions and sizes 5 Sliding door dimensions and sizes 6 Pocket door dimensions and sizes
How long does a roof last?
As the old saying goes, you get what you paid for. It is worth remembering that a roof renovation is an investment; you want this to last your house 20-25 years.
How old is a roof?
Below are a few things to take into consideration when determining if you need a new roof: The roof is 20-25 years old (or older) There are water leaks in the roof. There is visible damage or cracks to the shingles. There is a sag in the roof. Mold has made its way into the structure.
Sizing Documents
Standard size charts, custom size information, alignment grids, measurement guides and rough opening guides.
Find My Size
To find products that match your size specifications, use our Find My Size tool.
Comparison Chart
Compare minimum to maximum width and height ranges across our product series.
E-Series Sizing Calculator
Calculate dimensions including unit size, rough opening, casing size and masonry opening.
How wide is a standard exterior door?
So the best standard exterior door sizes are in width from 36 inches to 42 inches and for double doors they are from 72 inches to 84 inches. The height of these entryways are typically 80 inches but can be as much as 84 inches to even 96 inches.
What is the standard door opening size?
As you can see, the standard exterior door size rough opening is a full 2 ¼ inches wider than 36 inches and 2 1/8 inches higher than 80 inches. Keep this in mind. If you are using brick mold openings the dimensions would be 40 inches by 82 7/8 inches.
How wide is a 36 inch door with two 14 inch sidelights?
Sidelights typically come in 12 inches or 14 inches in width. So a single 36-inch door with two 14 inch sidelights is a nominal 64-inch width. The height is the same as with a single door.
What is the width of a prehung door?
The proper exterior pre-hung door is based on even more factors. The standard jamb width is 4 5/8 inches. However, there are times when the jamb is wider and you will need to order a jamb extension for your standard pre-hung door.
What does it mean when a door swings left or right?
In addition, you will need to know the swing and handing. This means is the door going to be a left or right in-swing and this determines where the door handles should be placed. Then there is the insulation factor of the material used for the door. This means is it wood or vinyl or composite or even steel clad.