There are a few different ways to reset the electronic throttle control on a Dodge Avenger. One option is to use an OBD reader to manually clear any code errors that may be causing the throttle function to become stuck or unresponsive.
Full Answer
How does the throttle control system work?
The electronic throttle control system control and monitors the position of the throttle. While older vehicles use a cable that’s linked directly to the throttle body, most modern cars accomplish this feat through sensors and your vehicle’s ECM.
What happens when throttle control fails?
The first sign of throttle control failure is a non-responsive throttle. This happens when you press the throttle but you do not get a quick response in terms of faster acceleration. You will feel a weak throttle response and at times a jitter before your car accelerates.
How to turn on the throttle without starting the car?
there is something about pushing the throttle to the floor then turning to on, but not starting, then hold 5 seconds and release slowly. something like that. There might be a how to some where 1) Turn key to 'start' and wait till the chimes stop (do not start vehicle). 1) Turn key to 'start' and wait till the chimes stop (do not start vehicle).
Is it safe to drive with an electronic throttle control light on?
Is It Safe To Drive With an Electronic Throttle Control Light? It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.
How do you reset the electronic throttle control system on a Dodge Avenger?
Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Throttle Valve Closed Position Learning.
How do I reset my electronic throttle position sensor?
The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.
How do you reset the throttle body on a 2012 Dodge Avenger?
0:362:54HOW TO CALIBRATE OR RELEARN THE THROTTLE BODY ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust turn it to the on. Position. Then what you want to do is go down there to your gas. I don'tMoreJust turn it to the on. Position. Then what you want to do is go down there to your gas. I don't know if you can see it enough. And you want to push it all the way down for 20 seconds.
How do I fix my electronic throttle control?
0:362:53How To Replace A Bad Electronic Throttle On Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet a new one don't get a Rheem and the reman ones aren't that good the new ones are much betterMoreGet a new one don't get a Rheem and the reman ones aren't that good the new ones are much better then you put a new gasket. In slide the throttle assembly over it. And then bolt it back on snog.
How do you reset the throttle body on a Dodge?
0:093:26Throttle Calibration- Relearn? Car Feels Different - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut your car in the run. Position. Once everything is good press down on the gas. And hold it downMorePut your car in the run. Position. Once everything is good press down on the gas. And hold it down for 20 seconds slowly let off the gas.
Do you have to reset computer after replacing throttle position sensor?
After replacing the throttle body to your engine, if the engine light was on and has a pending code, the code will go away. If the code was a hard permanent code, then the ECM (computer) would need a hard reset.
What does the lightning bolt symbol mean on a Dodge Avenger?
The lightning bolt means there is problem with the spark or your ign either way it's not good I'm sorry. 28 people found this helpful. 3,320.
What does a red lightning bolt mean on a 2013 Dodge Avenger?
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset.
Does the Dodge Avenger have a throttle position sensor?
Your Dodge Avenger will be happy to know that the search for the right Throttle Position Sensor products you've been looking for is over! Advance Auto Parts has 5 different Throttle Position Sensor for your vehicle, ready for shipping or in-store pick up.
How do I reset my throttle body after cleaning?
1:112:42Throttle Body Relearn: When Should I Reprogram My Car's ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou might have to let it run for three minutes and then shut the vehicle off. And then run it againMoreYou might have to let it run for three minutes and then shut the vehicle off. And then run it again for three minutes. It depends on the type of vehicle.Throttle Body Relearn: When Should I Reprogram My Car's ... - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do I reset my throttle body after cleaning?
What causes service electronic throttle control?
The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor. But while those are the most common causes of an electronic throttle light, they aren't the only things that could be going on.Electronic Throttle Control (ETC) Light On? (What It Means) - Mechanic Basehttps://mechanicbase.com › engine › throttle-control-warn...https://mechanicbase.com › engine › throttle-control-warn...Search for: What causes service electronic throttle control?
What causes throttle control failure?
Possible causes of a malfunction One of the main causes of a malfunctioning throttle body is internal contamination. Due to the contamination accumulated in the throttle body, the throttle valve can no longer move properly, causing problems with the control of the air supply.Main reasons for a defective throttle body - ACtronics LTDhttps://www.actronics.co.uk › news › the-3-main-reasons-...https://www.actronics.co.uk › news › the-3-main-reasons-...Search for: What causes throttle control failure?
How do you reset throttle body after replacing?
Leave the key off for a moment, turn the key to the "On" position again, wait 3 seconds, and press the accelerator 5 times in 5 seconds. Wait 7 seconds, and hold the accelerator down. The check engine light should start blinking, continue to hold pedal down until it stops blinking. You can then start the car.
How do I calibrate my accelerator pedal position sensor?
To calibrate the accelerator pedal assembly: To recalibrate the ECM and accelerator pedal, the ignition switch must be in the ON position and then the accelerator pedal must be slowly and fully depressed from idle to full throttle. Repeat the procedure three times.
What causes electronic throttle control problems?
The most common causes of an electronic throttle control light are a faulty throttle control sensor or a faulty throttle accelerator pedal position sensor.
What happens when you push the throttle?
When you pushed the pedal, you opened the throttle body, and you increased the amount of air that enters your engine. But in as technologies advanced, physical linkages were replaced with sensors and actuators. While this system allows for better air ...
What is the part of the throttle control system?
There are a few different parts to your electronic throttle control system, and an integral one is the accelerator pedal position sensor . This sensor communicates with your vehicle’s ECM to let it know how fast you want to go.
What does ECM do when everything doesn't come back?
So, when everything doesn’t come back the way it expects, it throws an electronic throttle control light so you can check out what’s going on. 2.
What happens if you have an electronic throttle light on?
If you have an electronic throttle light that’s on, you can quickly damage your engine, which can lead to even more expensive repairs when you get it to a repair shop.
What happens if a throttle actuator breaks?
While this system allows for better air to fuel ratios for better fuel economy and engine performance, the tradeoff is that if a sensor or actuator breaks, you lose control of your throttle. That’s why vehicle manufacturers packed their vehicles full of sensors and an entire system to monitor your electronic throttle control.
Why does my throttle light turn on?
Your electronic throttle control light monitors the throttle control system to ensure that everything is working the way it should. When it’s not, the light turns on to let you know that there is a problem.
Why is my throttle body stuck?
There are plenty of reasons that the throttle body can get stuck, but a common one is carbon build-up. Take a look at your throttle body and ensure that it can easily open and close. If it can’t, see if you can’t remove any obstructions and try cleaning it with a high-quality carb cleaner.