The average cost to repave an asphalt
Asphalt
Asphalt, also known as bitumen is a sticky, black and highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product; it is a substance classed as a pitch. Until the 20th century, the term asphaltum was also used. The word is derived fr…
Full Answer
How much does it cost to repair an asphalt driveway?
Repairing your asphalt driveway tends to cost between $800 and $2,500, depending on the same factors mentioned above. The national cost average for this project is about $1,500. Several special considerations apply, especially compared to concrete driveways.
How to resurface a driveway?
What’s the process for resurfacing a concrete driveway?
- Preparation and cleaning of the concrete surface. This step is all about creating an even concrete surface. ...
- Applying the base coat. A thin base coat is applied over the concrete and screeded till it’s level.
- Applying the resurfacing compound. ...
- Sealing of the surface. ...
How to estimate asphalt repair?
- Untreated potholes lead to faster pavement deterioration.
- Asphalt repair costs depend on the size, depth, and repair method.
- Minimum call-out fees of $100 to $250 apply to all asphalt repairs.
- Sealcoating the asphalt driveway after repairs gives a longer-lasting finish.
How much does asphalt driveway cost?
This leads to a national average of $3,000 to $10,000, with most people paying around $5,804 for a 24 by 24-foot hot mix asphalt driveway with a stone base. The low-end costs are as little as $1,214, while high-end projects cost as much as $13,441.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
Is it cheaper to pour asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you quote asphalt?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
What type of asphalt is best for driveways?
Hot mix asphaltHot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
Can you put asphalt over concrete driveway?
If the question is "CAN I lay asphalt over concrete?" then the answer is "Yes." This is absolutely possible if elevations allow for it, and we're happy to lay asphalt driveways over concrete if that's what you want. It's also the cheaper option since heavy equipment is required to dig up an existing concrete slab.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does asphalt cost per square foot?
Asphalt cost: $4.00 per square foot. This can vary depending on how thick it’s applied and the region in which you live.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
What is asphalt driveway made of?
An asphalt driveway is made from sand, rock, and asphalt cement. The standard is a deep smooth black, but you can add designs to asphalt as well.
How long does a concrete driveway last?
A concrete driveway can last for 30 years, while an asphalt drive is expected to last for 20 years.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What are the different types of driveways?
Then we’ll take a closer look at how to calculate the cost of an asphalt driveway. Types of driveways include: asphalt. b rick.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does it cost to build a driveway?
It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation. You can save money by choosing a material that fits your budget, but each material has a different lifespan, so weigh the costs against the longevity.
How much does a new driveway add to the value of a home?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
How long does a gravel driveway last?
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance. Concrete will expand and contract, leading to chips and cracks, plus it will stain easily. Concrete driveways typically last between 25 and 75 years.
What is the cheapest driveway material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a heated driveway cost?
Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot. But a heated driveway is only desirable in colder climates where it can melt ice and snow in winter.
How long does asphalt last?
It will soften in heat and will crack easily. Asphalt driveways will last around 15 to 30 years but need to be sealed every three to five years.
When is the best time to build a driveway?
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
How much does it cost to install asphalt?
Materials cost from $2 to $6 per square foot and installation costs $5 to $7 per square foot. Excavation, added curbs, or a sidewalk are extra costs. The national average for an asphalt driveway runs $4,737 but the overall cost can vary due to geographical location, the size of the area, labor, and asphalt type.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
Why is my driveway flaking?
The pavement is aesthetically pleasing, affordable, durable, and long lasting. Concrete will usually have some surface flaking due to poor installation, an incorrect mixture, or from salt used to melt ice and snow. Known as spalling, surface flaking is a problem with many concrete driveways, especially those that were hastily installed. Asphalt is less likely than pavement to crack over time.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
What is the best way to drain a driveway?
Porous Asphalt. If you live in a rainy climate and want to make sure the driveway drains properly, porous asphalt is the best choice. Rather than staying on the surface and running off, water drains through the asphalt. A layer of crushed stone is added under the asphalt to assist with the draining.
How much does it cost to install an electric gate on a driveway?
The average electric gate installation is around $7,000.
How much does it cost to install asphalt?
An estimated cost to install an asphalt driveway is near about $2,300 and $10,300. If you are a Homeowner, then the payment will be according to per square foot. The cost also depends on the contractors. Some companies may charge by the ton, with the cost fluctuating between $100 to $150 per ton.
How to find the amount of asphalt needed?
Additionally, to find the amount of needed asphalt you can also multiply the cubic footage by 145 and then divide It by 2, 000. For example, if the length is 25 f t 3 then the asphalt calculation will be as follows:
How much does asphalt weigh?
Most of the asphalt combinations that are commonly used for driveways and parking lots weigh 145 pounds per cubic foot of coverage. However, you can use the above-mentioned formula or an asphalt calculator to find out the amount of asphalt needed for any project.
How thick should a surface be for asphalt?
The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.
What is hot mix asphalt?
Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.
Is asphalt a liquid or semisolid?
Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
How much does it cost to seal a blacktop driveway?
To protect asphalt from the climate, homeowners should fill cracks annually and apply a protective sealant every 3–5 years — costs range from $0.20 to $0.50 per square foot plus labor. Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000.
Why do you put a walkway and driveway together?
Paving walkways leading to a home or garage in the same material as the driveway makes a home look well-kept. Doing them together saves money.
What do driveway bases do?
All driveways require a sturdy base regardless of their surface material. What does a base do? Bases create a firm foundation and proper drainage for your driveway. Imagine concrete pavers installed on topsoil — one good rain, and they’re floating on mud. Base materials such as crushed gravel or granite allow water to flow through without straining the concrete or asphalt.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to fix an asphalt driveway?
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs. They often charge per square foot when dealing with crumbling areas and potholes, but they might charge you in linear feet when fixing problems like cracks. Expect to pay between $1 and $3 per linear foot.
How much does a driveway repair cost?
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
How much does it cost to repair a crumbling asphalt driveway?
Homeowners pay $300 to $1,500 for crumbling asphalt driveway repair. It can be a worrying sign to see dry, crumbling sections of an asphalt driveway. This damage can easily get worse if left unattended. Loose materials must be cleaned out, deep cracks need filling and compacting, and fresh asphalt is applied and smoothed out to fix crumbling sections and edges.
What are the problems with asphalt?
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Why is asphalt driveway so popular?
It is a strong and durable material that withstands changing weather conditions and temperatures well , similar to concrete. However, asphalt driveways are prone to problems. They can suffer from water damage, cracks, potholes, and sunken sections, and you need a professional to repair your driveway when this happens.
How much does it cost to fill cracks in asphalt?
Homeowners pay between $100 and $400 for crack filling on an asphalt driveway. Cracks occur for various reasons, including changing temperatures. Freezing ice and thawing water expand and contract, generating cracks that become larger as more water and dirt fill them. Filling cracks is the best way to deal with this, but dirt or loose material must be cleaned out first.
How much does it cost to have weed control on my driveway?
Most homeowners spend between $65 and $150 to have a professional weed control service on their asphalt driveway. The service might also include weed control for the rest of your front yard or lawn. This can be an important service to get for your driveway because weeds grow in and around the asphalt, causing cracks and damage.