The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Full Answer
How much does it cost to have a paved driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does it cost to pave a concrete driveway?
Do-it-yourself materials typically cost $50-$200 or more, depending on the size of the driveway; hiring someone to seal a concrete paver driveway can cost $150-$500 or more.
Is repaving a driveway worth the cost?
Revamping the driveway is one way to do both—and it could even add value to your home, depending on the market, typical homes in your area and the type of material you choose. A driveway paving cost is $4,740 on average, according to HomeAdvisor, but the price tag can vary depending on various factors. Here’s what to know before you dig in.
How much to repave a driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt. *A new sub-base is not always required.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Why is paving a driveway so expensive?
Labor. Labor also drives the cost of driveway paving since it's a labor-intensive process. The labor cost to pave an average 450-square-foot driveway could run $5 to $7 per square foot or about $2,250. A driveway that has curves or is circular will cost more to complete, so labor costs will also increase.
Is it cheaper to pave or gravel a driveway?
A gravel driveway is a more budget-friendly option than paving with concrete, which runs from $4 to $15 per square foot.
How can I save money on my driveway?
Use Local Concrete Save money on your driveway by substituting one raw concrete material for another, particularly if one type of concrete is fabricated exclusively for your geographic area and costs less to make.
How can I pave cheaply?
Gravel is one of the most inexpensive paving options for a driveway, at as little as 50 cents per square foot, according to the LandscapingNetwork. It provides a rustic look that works well with cottage-style homes, and it can be installed relatively quickly.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
How long do driveway pavers last?
25 to 50 yearsA properly installed and maintained concrete paver driveway can be expected to last 25 to 50 years.
Can you pave driveway yourself?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
What is the best driveway to have?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
What is better than gravel for driveway?
Asphalt is best for look and longevity but requires maintenance and costs more. Gravel is more affordable but doesn't look as good as asphalt and will wash out over time.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
How much does it cost to pave a driveway?
While gravel and asphalt together cost around $4.50 a square foot in materials, the labor to pave the driveway will cost around $5 to $7 a square foot , depending on the complexity of the job.
How much does gravel cost?
Gravel. Gravel is the least expensive material you can use for your driveway, costing between $1 and $2 a square foot. In warm climates, it can last for decades with little maintenance. But in areas that see snowfall, plows and shovels can disturb the gravel, and pieces of rock can damage snowblowers.
What is tar and chip driveway?
Chip-sealed driveways, also called tar-and-chip, are a way to make asphalt driveways more durable and longer-lasting. A layer of asphalt is put down first, then a layer of aggregate is put on top and compacted into the tar.
What is interlocking pavers?
Interlocking Pavers. Interlocking pavers are one of the most durable and attractive forms of driveway paving. The pavers can be made of concrete, stone, brick, or composites and come in many shapes, sizes, and colors. Therefore, it is possible to create very interesting and unique designs.
What is the maintenance of a driveway?
Maintenance. Maintenance for driveways depends a lot on the climate you live in and the type of driveway. For both asphalt and concrete driveways, pay attention to cracks, frost heaves, and other structural problems with the material.
Why is it important to have a driveway freshly paved?
Having your driveway freshly paved will not only make your property look better, but it will also help prevent damage due to potholes and other issues inherent with older driveways.
How much does stamped concrete cost?
Stamped concrete is an attractive way to add color and design to a driveway. It costs around $8 to $12 a square foot, and multiple patterns and colors are available, which allows for customization. Like poured concrete, it does better in hot climates than cold climates and can be expensive and difficult to repair.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does a brick driveway cost?
A brick driveway costs $10 to $25 per square foot on average, or between $5,500 and $14,500 for materials and installation. Brick paver driveway prices depend on the strength rating, clay type and firing method, size, finish, and color.
How much does it cost to install pavers?
The labor cost to install pavers is $6 to $10 per square foot.
How long does a paver driveway last?
A paver driveway lasts 25 to 75 years, depending on the quality of installation work, the types of pavers, the maintenance steps taken, and the local weather. Compare this to a concrete driveway that lasts 20 to 30 years on average.
How much does porcelain paver cost?
A porcelain paver driveway costs $15 to $30 per square foot for materials and installation. Porcelain is stronger, lighter, and easier to install than natural stone or concrete pavers. With a low water absorption rate of 0.1 to 0.5%, porcelain doesn’t crack easily.
How much does it cost to install a concrete block driveway?
An average concrete block paving driveway costs $10 to $20 per square foot or between $5,500 to $11,500 for materials and installation. The price of concrete driveway pavers depends on the size, thickness, design, strength, and color.
How much does a paver base cost?
The cost of driveway sub-base and paver materials is $4 to $20 per square foot on average, which includes the gravel and crushed stone, fabric, sand, and edging. A driveway’s paver base must be a minimum thickness of 6 to 12 inches depending on the soil composition and drainage.
What materials are used to make a paver driveway?
The main driveway materials are concrete, stone, and brick. Choose from flat top, beveled, textured, tumbled, polished, honed, saw cut, sandblasted, flamed, chiseled edge, or antiqued.
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,746 on average, with a typical range between $2,935 and $6,567 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does an asphalt driveway cost per square foot?
At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet. "Provided it's installed properly, including a stable base, and is well-maintained over time, an asphalt driveway should last twenty years or longer.".
How much does it cost to seal asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot. Asphalt in a unique shape or color adds interest to your property. In most cases, you’ll want to seal it to keep it in good condition for longer.
How much does asphalt overlay cost?
Asphalt Overlay Cost. Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.