How much is it to pave a driveway?
There is also the gradient to consider. 'You want the driveway to drain surface water within the boundary of your property, so to achieve this, the driveway will need a gentle gradient called the "fall",' explains Cass. The fall should be between a 1:60 and 1:80 gradient and direct the run-off somewhere suitable (more on this below).
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How much does it cost to repave a driveway?
Repaving an asphalt driveway costs $7,000 on average, with a typical range of $4,000 to $10,000.This includes the cost to demolish and remove the old driveway ($1,000 to $3,000) and pave a new driveway ($3,000 to $7,000).
What are the steps to repaving a driveway?
- The best kind asphalt to use for a residential driveway is HL3.
- Order enough asphalt for 2.5 inches of thickness. ...
- Ensure you hire an experienced paver to apply the asphalt for this part (the asphalt must be applied when hot, you must pave it quickly!). ...
- Apply the asphalt in vertical paths, from the top-down.
How do you calculate paved driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How do you quote an asphalt driveway?
Amount of asphalt: consider the length, depth, and width of your driveway. Then ask your contractor to check and provide you a quote. Transportation costs: the farther your house is located, the more you are likely to pay more costs. This will also affect the type of asphalt you will use such as warm or hot mixes.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
What is the formula for calculating asphalt?
Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved. Performing this step yields 12.5 feet times 8.33 feet times 0.42 feet or 43.7 cubic feet.
Is concrete driveway better than asphalt?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
Do pavers increase home value?
Aside from this, how the pavers are used will also make a difference. For example, a great patio could add as much as $15,000 to the average home's price. However, if you are using pavers as part of creating a brand new garden space, you could improve your home's value by as much as 20 percent.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How accurate is the driveway cost calculator?
We update the Driveway Cost Calculator every 3 months and the figures are based on quotes from our previous work. Our calculator is accurate for most driveways of average size to larger driveways, the difficultly is predicting the cost of extras, removal of existing materials, and volume of Hardcore (base) needed.
Do I need to provide any private information to use the Driveway Cost Calculator?
NO! The Driveway Cost Calculator is free to use if you wish for us not to contact you then you can tick the box at the end form and your data will not be stored and we will not contact you.
Will you contact me after I've submitted the form?
If you wish for us to contact you after you submit please click the relevant box at the end. When contacting you we’ll be able to give you a more accurate estimate, along with arranging a date for us to visit the project site.
Do you pass on my information to 3rd parties?
NO! Any information or enquiries received from our customers is not passed onto any 3rd parties, if you wish for us to contact you please tick the consent box at the end.
I can't see a design or colour I like?
The Driveway Cost Calculator only has a limited number of designs and colours, however, these don’t really differ in price.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How do I measure a patio?
Start by choosing whether your patio is a single rectangle or if it has a different shape, in which case you need to divide it into identical rectangles to make the calculation easier. NOTE: Don't worry if the shape of your patio is impossible to divide into rectangles of the same size.
What size paver brick should I use?
Common paver sizes. The most commonly used paver brick size is 4" x 8" (10cm x 20cm in the metric system ). However, other sizes are not rare at all. Here's a table of the most widely used paver brick sizes, along with their corresponding dimensions in the metric system: Size (in) Size (cm)
Why do you need pavers for a patio?
There is a number of reasons why we think it's a great idea to have your patio done with pavers. Paved patios are durable. Pavers are usually made of concrete, clay brick or even natural stone. There aren't many construction materials stronger than that.
How many squares are there in John's patio?
John's patio is a shape resembling a four-armed star, so he can divide it into five 15'x15' squares. To count this, he uses the following equation: patio area = subarea width * subarea length * number of subareas. So, in our example's case: patio area = 15 ft * 15 ft * 5 = 1,125 ft². 2.
Is paving prone to mistakes?
As is the case with all construction works, paving is prone to mistakes. To avoid having to waste gasoline going back and forth to the store for additional materials, consider buying at least 10% more of everything.
Can concrete crack in winter?
Solid surfaces, such as concrete, are prone to cracking and generally don't fare very well in places where the temperature changes drastically between seasons. You can see it on many roads - notice how many new potholes tend to appear after winter. With pavers, this will not be an issue. They are low maintenance.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.