driveway paving cost per square foot

Cost to Pave a Driveway

Driveway Paving Cost Calculator	Zip Code	Sq. ft.
Paving Material Prices	$375.00 - $437.50	$462.50 - $525.00	$550.00 - $650.00
Installation Cost	$1250.00 - $1275.00	$1500.00 - $1575.00	$2250.00 - $2900.00
Total	$1625.00 - $1712.50	$1962.50 - $2100.00	$2800.00 - $3550.00
Total Average Cost per square foot	$6.67	$8.13	$12.70

Nov 15 2021

Full Answer

How much does it cost to pave a 10K sq ft driveway?

9 rows · 17/09/2021 · The average costs to pave a driveway range between $3 and $15 per square foot. The cost ...

How much does asphalt paving cost per square foot?

5 rows · Asphalt Driveway Paving Cost. Asphalt, also known as blacktop, is a blend of dark pitch and ...

How much does it cost to widen a single car driveway?

31/05/2010 · Driveway Paving Cost per Square Foot. The average driveway pavement cost homeowners pay is between $8 and $25 per sq.ft. with labor included. While most projects are charged per sq.ft. some contractors charge by the hour at a rate of $25 to $60 per hour. These are limited to smaller projects and upgrades or repairs.

How much does it cost to repave a 20x20 driveway?

01/04/2019 · Paving Driveway Cost Per Square Foot On average, it costs between $1.49 and $1.69 per square foot to pave an asphalt parking lot. Striping, marking, and curbing will come at an additional cost.

What’s the cheapest type of driveway material?

Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...

How long can a driveway last?

It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...

How long does it take before you can drive on a new driveway?

Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....

Why is my concrete driveway heaving?

The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.

What is a base for a driveway?

Bases create a firm foundation and proper drainage for your driveway. Imagine concrete pavers installed on topsoil — one good rain, and they’re floating on mud. Base materials such as crushed gravel or granite allow water to flow through without straining the concrete or asphalt.

How much does it cost to pave a driveway?

Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.

Is gravel driveway hard?

Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it. Traditionally, gravel driveways are more prevalent in rural areas where the rustic look adds to a home’s charm.

How much does asphalt cost?

It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.

Can rain pour on concrete?

Rain pouring on concrete or asphalt acts differently. On a perfectly flat driveway, it can accumulate, creating a hazard and causing the surface to deteriorate — while on an improperly graded driveway, it can move like lightning toward buildings and roadways where it contributes to flooding.

How much does it cost to repair a blacktop driveway?

Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.

Why is it important to have a driveway freshly paved?

Having your driveway freshly paved will not only make your property look better, but it will also help prevent damage due to potholes and other issues inherent with older driveways.

What is interlocking pavers?

Interlocking Pavers. Interlocking pavers are one of the most durable and attractive forms of driveway paving. The pavers can be made of concrete, stone, brick, or composites and come in many shapes, sizes, and colors. Therefore, it is possible to create very interesting and unique designs.

How much does gravel cost?

Gravel. Gravel is the least expensive material you can use for your driveway, costing between $1 and $2 a square foot. In warm climates, it can last for decades with little maintenance. But in areas that see snowfall, plows and shovels can disturb the gravel, and pieces of rock can damage snowblowers.

Do you need to level a driveway before paving?

Most driveways must be leveled and compacted prior to paving. If you are repaving an existing driveway, this is generally not needed. If this is new construction, however , the driveway will need to be leveled and compacted before beginning.

What is tar and chip driveway?

Chip-sealed driveways, also called tar-and-chip, are a way to make asphalt driveways more durable and longer-lasting. A layer of asphalt is put down first, then a layer of aggregate is put on top and compacted into the tar.

How much does stamped concrete cost?

Stamped concrete is an attractive way to add color and design to a driveway. It costs around $8 to $12 a square foot, and multiple patterns and colors are available, which allows for customization. Like poured concrete, it does better in hot climates than cold climates and can be expensive and difficult to repair.

What is the maintenance of a driveway?

Maintenance. Maintenance for driveways depends a lot on the climate you live in and the type of driveway. For both asphalt and concrete driveways, pay attention to cracks, frost heaves, and other structural problems with the material.

Why is a full gusset important?

A full gusset shoe tongue is important because the design prevents stones, hot tar, and hot oil from getting into the shoe through the tongue lace area.

What is the constituent of asphalt?

A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.

How long does asphalt last?

Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...

When was coal tar invented?

Coal tar was then introduced in 1800, a residual from coal gas-lighting which was recyclable and was used for huge traffic roads. Frederick J. Warren in 1901 and 1903 patented the early hot mix asphalt material which is still used in many parts of the world.

Is asphalt pavement recycled?

It is estimated that 80% of all asphalt pavement is recycled. Asphalt pavement has found application in driveways, gardens, roads, runaways, and the list goes on. Without a doubt, asphalt is the far best choice when considering durability.

What is the mix of asphalt and sand?

Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.

How thick were Roman roads?

The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.

What are the benefits of asphalt driveways?

Other benefits of installing an asphalt driveway include: 1 Ready to use within a few hours after installation 2 Durability 3 Aesthetics 4 Easy to maintain 5 Easy to repair 6 Materials are recyclable 7 Cold temperature resistant 8 Versatile 9 Does not stain easily

What is the best material for a driveway?

There are two main types of driveway material: asphalt and concrete. Many homeowners choose asphalt not only because the finished product looks nice, but the asphalt paving cost estimate is considerably cheaper than a cement driving pad. Other benefits of installing an asphalt driveway include: Ready to use within a few hours after installation.

How many square feet does a ton of asphalt cover?

One ton covers between 40 to 80 square feet. Average driveway requires 7.5 to 15 tonnes of asphalt. Asphalt paving costs per square foot depend on the cost for manufactures to produce asphalt. For example, when petroleum prices increase, it costs manufacturers more to produce asphalt so the price for consumers also increases.

Does adding drainage lines increase labor costs?

Adding drainage lines, difficult to get to locations, regional price variations, and required permits will also increase the labour costs. Always do your research before hiring an asphalt company to work on your driveway.

How much does it cost to install an asphalt driveway?

Most contractors charge between $12.00 to $17.00 per square foot to install an asphalt driveway. However, there are some factors that could increase the asphalt paving labour cost estimate. For example, if the company has to excavate your driveway first, it could cost you up to $5,100.00 more depending on the size of your driveway.

Can you repair a crack in a driveway?

Many issues with the driveway can be easily repaired. This will not only extend the life of your driveway but lower the estimated asphalt paving cost per square foot. Many cracks and small holes can be easily patched or resurfaced, significantly lowering the asphalt paving cost estimate.

How thick is asphalt?

Other factors that affect pricing include thickness of the asphalt layer installed. Homeowners can get 5 cm (2 inch) or 10 cm (4 inch) of asphalt on their driveways. The thicker driving path requires more materials which also affect the asphalt paving costs estimate.

How long does asphalt last?

An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.

Is asphalt cheaper than concrete?

An asphalt driveway is cheaper than concrete, at $3 to $7 per square foot. In comparison, a concrete driveway costs $4 to $8 per square foot for installation. Concrete is more expensive than asphalt because of the price of its cement binder materials.

How much does it cost to remove asphalt?

Cost to remove an asphalt driveway. The average cost to remove an asphalt driveway is $1 to $3 per square foot , depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.

How much does it cost to heat a driveway?

Heated asphalt driveway cost. A heated driveway costs $12 to $28 per square foot installed, depending on if it's new or a replacement. An average 2-car heated driveway with asphalt repaving costs $6,900 to $16,000. Heating an asphalt driveway prevents ice and snow accumulation.

How much does it cost to pave a road?

Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.

How much does it cost to pave a parking lot?

Cost to pave an asphalt parking lot. Paving an asphalt parking lot costs $3 to $7 per square foot, not including marking, striping, curbing, or permits. Paving a 10-car asphalt parking lot costs $9,000 to $21,000 on average or $900 to $2,100 per space of 300 square feet.

How much does it cost to pave a 100 foot path?

Paving a 100-foot asphalt path costs $900 to $2,100 on average or $9 to $21 per linear foot. Garden paths are typically 30 to 36 inches wide and don’t require a gravel base. Hard-to-access and curved paths with complicated designs cost more because of the additional labor.

What makes a price range different?

The reason why the price range is so different, at least for some of the options, is related to two main factors: 1 Production process and; 2 The cost or difficulty of obtaining the raw material.

Why do pavers shift?

The soil, due to natural characteristics, tends to shift. Pavers’ installation allows it to be malleable to the ground, and these variations are unlikely to affect them. Concrete slabs, on the other hand, don’t have this same flexible characteristic.

What are the advantages of pavers over concrete?

Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics. Visually speaking, paver designs are much more beautiful. This appeal can be explained by the fact that pavers come in different colors, shapes, and textures.

How much does concrete cost per square foot?

Concrete slabs typically cost about $ 6 per square foot (installation included), so although relatively cheaper than some of the options above, when maintenance and repair costs start to kick in, they become the more expensive choice. Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics.

Can concrete be stamped?

Although concrete can also be stamped to resemble pavers, it’s not even close to the real deal. Durability. Both, pavers and their installation process, have been developed to last for decades and continue to look as if just recently installed. The soil, due to natural characteristics, tends to shift.

Why do we need pavers?

Pavers allow you to be creative in your design, so you hardly will find a project similar to yours. Pavers allow you to add a personal touch, whether on your driveway, walkway, around the pool, a living space, in short, the options are countless.

How long do pavers last?

Here are the good news, with periodic maintenance, pavers last for decades without requiring any heavy maintenance.