Full Answer
How much does it cost to pave a driveway in Canada?
11/05/2020 · How Much Does It Cost to Pave a Driveway in Ontario Canada? Changing weather and frequently altering load over the asphalt distorts it internally. Firstly, the issues arise majorly from the sub-base layer. However, soon the damages become visible on the surface. ... It will reduce the overall Driveway Paving Cost. #3: Extra Labor Cost. Sometimes, on-site, the project …
What is the cost of paving materials?
19/06/2020 · The cost of asphalt ranges from approx. $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it on the basis of tonnes. #2: Installation. The equipment and the processes needed during installation also influence the Cost of Driveway Paving.
How much does it cost to replace a driveway with asphalt?
10/06/2020 · Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces. Other factors that affect pricing include thickness of the asphalt layer installed.
Are asphalt driveways common in Canada?
The cost per square metre for buying pavers is $25-$100 and installing them is $65-$100. The total cost would be $4700-$8000 for the 30-square metre driveway. Likewise, which is cheaper concrete or asphalt driveway? The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in …
How much does it cost to pave a driveway in Ontario?
Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.
How much does it cost to pave a 2 car driveway in Ontario?
Asphalt / blacktop driveway Asphalt driveway paving costs $3 to $7 per square foot or $1,800 to $4,200 on average for a 600 square foot two-car driveway. Blacktop lasts 15 to 30 years and withstands freezing temperatures better than concrete but requires sealing every 3 to 5 years.19-Mar-2021
How much does a driveway cost Ontario?
Click here to learn how much interlocking pavers cost in Ontario. Since concrete is priced by square footage, the shape and size of the area will increase/decrease the cost. The average price of concrete ranges from $15 – $22 per square foot.
How much does it cost to pave a driveway calculator?
Cost to Pave a DrivewayDriveway Paving Cost CalculatorZip CodeBasicBestInstallation Cost$1250.00 - $1275.00$2250.00 - $2900.00Total$1625.00 - $1712.50$2800.00 - $3550.00Total Average Cost per square foot$6.67$12.701 more row
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.25-Feb-2019
Which is cheaper concrete or asphalt?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.13-Jun-2018
What is the cheapest type of driveway?
Advantages of Aggregate Driveways Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway.
How deep should you excavate for a driveway?
Before laying your gravel driveway, you must first prepare the area. This may require removing debris, turf, or topsoil. You will then need to dig out the area to a depth of between 50mm to 200mm. It is important that a minimum of 50mm is left for the gravel, and 150mm for the sub-base if you plan on including one.10-Feb-2021
How thick should a concrete driveway be in Ontario?
As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How do you calculate paved driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:08-Jun-2018
How do I calculate asphalt driveway?
0:322:12How To Quickly Figure The Cost Of An Asphalt Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut this driveway here on this example measures 20 feet by 30 feet. So all you have to do is toMoreOut this driveway here on this example measures 20 feet by 30 feet. So all you have to do is to multiply. 20 by 30 and that's going to give you the square footage of this driveway.
How do I calculate how much asphalt I need?
How to Calculate Asphalt TonnageUse a tape measure to determine distances. ... Convert the length, width and height measurements to feet by dividing by 12, since each foot contains 12 inches. ... Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved.More items...
Why is asphalt driveway costing more in Ontario?
A difficult layout or existing drainage problems may cause a price increase because it may take longer to complete. While Asphalt Driveway Cost Ontario is more affordable than options such as concrete, the total cost that you will incur for a new driveway will depend on multiple factors. Some of these include:
What determines the price of a driveway?
Aside from the size of a driveway, several other factors determine the price. Mostly size is the number one factor. But driveways on a slope or ones with odd shapes or lengths can also add to the cost.
How long does an asphalt driveway last?
The typical life expectancy of an asphalt driveway is 20 years. But it’s important to take necessary maintenance measures.
What is the base of a driveway?
A base composed of gravel is usually installed between the asphalt layer and the underlying surface. The landscaping work required will typically add to the installation and labor costs.
How long does it take to replace an asphalt driveway?
Many contractors say asphalt driveways don’t need replacing between 15 and 25 years if correctly maintained. Still, it’s important to know how much it can cost if you do need to repair or replace your driveway.
How much does it cost to remove a tree?
Homeowners can expect to pay up to $50 an hour to have a company remove small trees near the area and about $200 to $400 for heavy machinery and laborers to prepare a new driveway base. Though, the exact estimation of these costs will depend on your location. Each job is different.
How much does asphalt cost per square foot?
One coat will go on the bottom and another will be present at the top. The cost of asphalt ranges from approx. $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it on the basis of tonnes.
What are the benefits of asphalt driveways?
Other benefits of installing an asphalt driveway include: 1 Ready to use within a few hours after installation 2 Durability 3 Aesthetics 4 Easy to maintain 5 Easy to repair 6 Materials are recyclable 7 Cold temperature resistant 8 Versatile 9 Does not stain easily
What is the best material for a driveway?
There are two main types of driveway material: asphalt and concrete. Many homeowners choose asphalt not only because the finished product looks nice, but the asphalt paving cost estimate is considerably cheaper than a cement driving pad. Other benefits of installing an asphalt driveway include: Ready to use within a few hours after installation.
How many square feet does a ton of asphalt cover?
One ton covers between 40 to 80 square feet. Average driveway requires 7.5 to 15 tonnes of asphalt. Asphalt paving costs per square foot depend on the cost for manufactures to produce asphalt. For example, when petroleum prices increase, it costs manufacturers more to produce asphalt so the price for consumers also increases.
Does adding drainage lines increase labor costs?
Adding drainage lines, difficult to get to locations, regional price variations, and required permits will also increase the labour costs. Always do your research before hiring an asphalt company to work on your driveway.
How much does it cost to install an asphalt driveway?
Most contractors charge between $12.00 to $17.00 per square foot to install an asphalt driveway. However, there are some factors that could increase the asphalt paving labour cost estimate. For example, if the company has to excavate your driveway first, it could cost you up to $5,100.00 more depending on the size of your driveway.
Can you repair a crack in a driveway?
Many issues with the driveway can be easily repaired. This will not only extend the life of your driveway but lower the estimated asphalt paving cost per square foot. Many cracks and small holes can be easily patched or resurfaced, significantly lowering the asphalt paving cost estimate.
How thick is asphalt?
Other factors that affect pricing include thickness of the asphalt layer installed. Homeowners can get 5 cm (2 inch) or 10 cm (4 inch) of asphalt on their driveways. The thicker driving path requires more materials which also affect the asphalt paving costs estimate.
How long does a concrete driveway last?
Concrete driveways are durable, stable and low maintenance. Unlike asphalt – which last only a maximum of 8 years, concrete can last for over 20 years with an added advantage that weeds will not grow on the paved area. Concrete is considered less expensive than interlocking stone.
Is concrete cheaper than stone?
Concrete is considered less expensive than interlocking stone. The price of the concrete landscaping project is calculated based on a few factors. Since concrete is priced by square footage, the shape and size of the area will increase/decrease the cost.
Is concrete stain resistant?
Concrete is mixed in the truck and is stain resistant. A level up from brushed concrete is Exposed Aggregate Concrete which gives your driveway or backyard patio that added texture. Decorative, stamped or stained concrete are premium finishes that will bring the price higher.
Does concrete crack when it's hot?
With the temperature’s fluctuation, concrete will crack, though stress lines are created to minimize these occurrences. In addition, since concrete is harder to remove, replacing or repairing partial areas is more challenging than interlocking pavers.
How much does asphalt cost per square foot?
On average, the cost per square foot for asphalt will run between $2.50 to $4.00. It's not unheard of to have a stained concrete driveway with a smooth finish cost over $15.00 per square foot. Is 2 inches of asphalt enough for a driveway?
How much asphalt should I use for a driveway?
The granular base aggregate used for a residential driveway is typically 6 to 8 inches. On top of this layer, residential driveways typically use 2 to 3 inches of asphalt, whereas commercial driveways use about 3 inches.
Why do driveways crack?
By excavating the ground as it should be done, this gives stronger stability to the driveway's structure, thereby reducing the risk of cracks appearing. Some cracks may still occur because of changes in temperature. However, if the driveway is well made and well maintained, the number of cracks will remain limited.
What is geotextile in soil?
The Perrier Guide defines geotextile as: "... a synthetic, filtering, rot-resistant and highly resistant fabric that is used in the soil to prevent fine particles from entering the gravel , keeping it from fulfilling its drainage task .
How long does asphalt last?
Asphalt. Between the three, asphalt is the cheapest material. It can last around 15 years and, with a good granular base, up to 20 years. Mixed with paver stones (also known as paving stones), it can give a more sophisticated look to the pavement.
Can you pour a stone on the ground?
You can pour it directly on the ground. Its installation cost and lifespan are similar to those of paver stones. Excluding the cost of excavating the entrance, prices can vary a lot depending on the materials, their characteristics (shape, grade, etc.) and where they are bought. The approximate cost of paving an entrance according ...
What does it mean when you have water in your driveway?
Pavement problems: signs to watch out for. If you have water accumulation in your entrance, it could mean that there is a problem with the pavement, whether it is with the paver stones or the surface drainage system, which could damage your entrance in the long term.
How long do stone pavers last?
They are hard blocks made out of concrete, glass, clay, brick, stones or plastic. They give character to the look of an entrance and can last up to 30 years.
Can a snowplough damage pavement?
In the winter be careful if you use a snowplough. Depending on the type of blade, it could damage your pavement. Check with your contractor to see if they have any specific maintenance recommendations to ensure the durability of your pavement.
What is the best driveway material for Canada?
Asphalt. Asphal t driveways are very common in Canada as they are fit for a variety of climates. In particular, asphalt tends to thrive in colder climates compared to other materials, such as concrete. The black colour retains heat, which can help to melt snow faster during the winter months.
How much does it cost to pave a concrete driveway?
The average cost to pave your concrete driveway is $7-$12 per square foot.
Is interlocking stone or paver better?
Interlocking Stone/Paver. A paver driveway is a great way to increase your curb appeal, but it comes at a cost. Interlocking stone driveways tend to be more expensive as the labour required is more extensive than the others since each individual stone needs to be placed. However, paver driveways have a low maintenance cost over time ...
What questions should I ask a driveway contractor?
Questions to ask driveway contractors 1 Can you provide me examples or addresses of your previous driveway paving jobs? 2 Will you be using control joints or wooden expansion joints to minimize concrete cracking? 3 Are you licensed, insured, and bonded? 4 Does the estimate include all materials and labor fees? What additional costs can I expect? 5 What permits do I need, and will you obtain them? 6 How do you handle damages that happen on the job? 7 What does your warranty policy include? 8 What is your payment schedule?
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
Does a paved driveway increase the value of a house?
If most homes in the neighborhood have gravel driveways, a paved driveway sets a house apart, increasing its value. If other homes have paved driveways, replacing a gravel driveway with concrete or asphalt increases the value.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does a chip seal driveway cost?
Chip seal driveway. Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does it cost to widen a driveway?
Widening a driveway costs $3 to $12 per square foot , depending on the materials. Adding 200 square feet of driveway surface costs $600 to $2,400 on average. Minimum and maximum driveway widths may be subject to local zoning regulations.