Driveway pavers cost $10 to $30 per square foot on average installed or $6,000 to $18,000 for a two-car driveway. High-end concrete block, paving stones, or brick paver driveways cost $25 to $50 per square foot. Driveway pavers last 25 to 75 years, depending on maintenance and weather.
Full Answer
How much does it cost to pave a driveway in Canada?
Likewise, how much does it cost to pave a driveway Canada? The price for a new driveway can depend on many factors – your location, the size of the drive, the slope, the length, and more. So, a new asphalt drive could cost you approximately $1 to $5 per square foot. If your driveway were 12 by 40 feet, the cost would range from $480 to $2400.
How to reduce the cost of driveway paving?
You have the option of hot asphalt mixes or cold ones. Well, go for one ensuring durability to your pavement. Also, you can reuse the previous asphalt of your pavement as the base layer. It will reduce the overall Driveway Paving Cost. Sometimes, on-site, the project demands some extra man force.
How much does it cost to replace a driveway?
If you need to tear up your existing driveway, the costs will obviously increase. Driveway removal will cost around $1 to $3 per square foot while a replacement will cost between $3 and $12 per square foot. You can also choose to widen a driveway, but expect a price tag of around $600 to $2,400.
How much do grass block driveway pavers cost?
Grass driveway pavers cost $4 to $12 per square foot or $2,400 to $7,200 on average, depending on if it's concrete or plastic. Grass block pavers – also known as grow-through or turf block pavers – allow water to sink into the grid system while grass grows through the holes.
How much does it cost to pave a driveway in Ontario?
Asphalt / blacktop driveway Asphalt driveway paving costs $3 to $7 per square foot or $1,800 to $4,200 on average for a 600 square foot two-car driveway.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How do you calculate paved driveway?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How thick should a blacktop driveway be?
A 4-inch thickness may be adequate, but 5 or even 6 inches of full-depth asphalt will assure you of a stronger, stable driveway under a wider range of climate and loads. As an option, some contractors use 6 to 8 inches of compacted aggregate, or gravel, as a base under 3 inches of asphalt pavement.
Is replacing a driveway a good investment?
You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.
How big is a 2 car driveway?
between 20 and 24 feet wideDouble car driveways can be between 20 and 24 feet wide. A driveway width of 20 feet provides enough space for two cars to pass, but not quite enough room for parking side-by-side and opening doors. If you need space for parking two cars, consider making your driveway 24 feet wide.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
How much will a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
What is the best company to repair potholes in Toronto?
Main Infrastructure is the best pothole repair company in Toronto that offers all kinds of asphalt repair and maintenance services. To provide you with a durable and resurrected pavement, we retain the material quality and service standard. View all posts by Main Infrastructure
Is it good to have a rough idea of paving?
Well, there are several attributes of an asphalt paving project affecting your budget. Obviously, having a rough idea before you move forward with your project is good. It gives you an approximate idea of expenses and prevents unnecessary expenses.
Can you reuse asphalt?
Well, go for one ensuring durability to your pavement. Also, you can reuse the previous asphalt of your pavement as the base layer. It will reduce the overall Driveway Paving Cost.
Why is asphalt driveway costing more in Ontario?
A difficult layout or existing drainage problems may cause a price increase because it may take longer to complete. While Asphalt Driveway Cost Ontario is more affordable than options such as concrete, the total cost that you will incur for a new driveway will depend on multiple factors. Some of these include:
What determines the price of a driveway?
Aside from the size of a driveway, several other factors determine the price. Mostly size is the number one factor. But driveways on a slope or ones with odd shapes or lengths can also add to the cost.
How long does an asphalt driveway last?
The typical life expectancy of an asphalt driveway is 20 years. But it’s important to take necessary maintenance measures.
How long does it take to replace an asphalt driveway?
Many contractors say asphalt driveways don’t need replacing between 15 and 25 years if correctly maintained. Still, it’s important to know how much it can cost if you do need to repair or replace your driveway.
How much does asphalt cost per square foot?
One coat will go on the bottom and another will be present at the top. The cost of asphalt ranges from approx. $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it on the basis of tonnes.
What is the base of a driveway?
A base composed of gravel is usually installed between the asphalt layer and the underlying surface. The landscaping work required will typically add to the installation and labor costs.
How much does it cost to remove a tree?
Homeowners can expect to pay up to $50 an hour to have a company remove small trees near the area and about $200 to $400 for heavy machinery and laborers to prepare a new driveway base. Though, the exact estimation of these costs will depend on your location. Each job is different.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does it cost to install an asphalt driveway?
Most contractors charge between $12.00 to $17.00 per square foot to install an asphalt driveway. However, there are some factors that could increase the asphalt paving labour cost estimate. For example, if the company has to excavate your driveway first, it could cost you up to $5,100.00 more depending on the size of your driveway.
How much does asphalt cost per square foot?
Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.
What is the best material for a driveway?
There are two main types of driveway material: asphalt and concrete. Many homeowners choose asphalt not only because the finished product looks nice, but the asphalt paving cost estimate is considerably cheaper than a cement driving pad. Other benefits of installing an asphalt driveway include: Ready to use within a few hours after installation.
How many square feet does a ton of asphalt cover?
One ton covers between 40 to 80 square feet. Average driveway requires 7.5 to 15 tonnes of asphalt. Asphalt paving costs per square foot depend on the cost for manufactures to produce asphalt. For example, when petroleum prices increase, it costs manufacturers more to produce asphalt so the price for consumers also increases.
How thick is asphalt?
Other factors that affect pricing include thickness of the asphalt layer installed. Homeowners can get 5 cm (2 inch) or 10 cm (4 inch) of asphalt on their driveways. The thicker driving path requires more materials which also affect the asphalt paving costs estimate.
Is a driveway a necessary part of the outside of a house?
Your home’s driveway is not only a necessary part of the outside of your home, but a beautifully done parking pad improves your home’s curb appeal. Installing an asphalt driveway is cost effective and, with regular care, will last for years. There are two main types of driveway material: asphalt and concrete. ...
Can you repair a crack in a driveway?
Many issues with the driveway can be easily repaired. This will not only extend the life of your driveway but lower the estimated asphalt paving cost per square foot. Many cracks and small holes can be easily patched or resurfaced, significantly lowering the asphalt paving cost estimate.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much more expensive is a circular driveway?
Circular driveways cost 10% to 20% more than straight driveways because building a curved shape requires more labor and installation time. Wrap-around driveways take up more yard space but add curb appeal and provide a way for vehicles to enter and exit easily.
How long does a concrete driveway last?
Concrete driveways are durable, stable and low maintenance. Unlike asphalt – which last only a maximum of 8 years, concrete can last for over 20 years with an added advantage that weeds will not grow on the paved area. Concrete is considered less expensive than interlocking stone.
Can concrete crack?
With the temperature’s fluctuation, concrete will crack, though stress lines are created to minimize these occurrences. In addition, since concrete is harder to remove, replacing or repairing partial areas is more challenging than interlocking pavers. Removal of Driveway. Installation of Concrete Driveway.
Is concrete cheaper than stone?
Concrete is considered less expensive than interlocking stone. The price of the concrete landscaping project is calculated based on a few factors. Since concrete is priced by square footage, the shape and size of the area will increase/decrease the cost.