How do I estimate my driveway paving cost?
This driveway paving estimator will provide you with up to date pricing for your local area. Simply enter your zip code and the square footage, click update and you will see a breakdown on what it should cost to have your driveway paved by a local paving company near you. Example: a 10 x 10 area = 100 square feet.
How much does it cost to lay block paving?
The labor cost to install pavers is $6 to $10 per square foot. The average labor cost to lay block paving is $6 to $10 per square foot for a driveway. Prices depend on the layout, pattern, site preparation, and operation fees. Landscapers charge $50 to $100 per hour for driveway paver installation and any prep work.
How much does a new Blacktop driveway cost?
A new blacktop driveway costs $3 to $7 per square foot on average. Cost factors that affect the total estimate include the: *Permits are typically required for all areas near public roads.
Where can I get the best prices on driveway pavers?
Landscaping or, mason companies will most always get better prices on Driveway Pavers — saving your back and additional costs of Driveway Pavers, so shop around, ask your neighbors if they can recommend someone. How much do Decorative Pavers cost? How much are Ashlar Stone Pavers?
How do you calculate driveway paving?
0:382:12How To Quickly Figure The Cost Of An Asphalt Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut this driveway here on this example measures 20 feet by 30 feet. So all you have to do is toMoreOut this driveway here on this example measures 20 feet by 30 feet. So all you have to do is to multiply. 20 by 30 and that's going to give you the square footage of this driveway.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How can I save money on my driveway?
Use Local Concrete Save money on your driveway by substituting one raw concrete material for another, particularly if one type of concrete is fabricated exclusively for your geographic area and costs less to make.
How can I pave cheaply?
Gravel is one of the most inexpensive paving options for a driveway, at as little as 50 cents per square foot, according to the LandscapingNetwork. It provides a rustic look that works well with cottage-style homes, and it can be installed relatively quickly.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does a brick driveway cost?
A brick driveway costs $10 to $25 per square foot on average, or between $5,500 and $14,500 for materials and installation. Brick paver driveway prices depend on the strength rating, clay type and firing method, size, finish, and color.
How much does it cost to install a concrete block driveway?
An average concrete block paving driveway costs $10 to $20 per square foot or between $5,500 to $11,500 for materials and installation. The price of concrete driveway pavers depends on the size, thickness, design, strength, and color.
How much does it cost to install pavers?
The labor cost to install pavers is $6 to $10 per square foot.
How long does a paver driveway last?
A paver driveway lasts 25 to 75 years, depending on the quality of installation work, the types of pavers, the maintenance steps taken, and the local weather. Compare this to a concrete driveway that lasts 20 to 30 years on average.
How much does porcelain paver cost?
A porcelain paver driveway costs $15 to $30 per square foot for materials and installation. Porcelain is stronger, lighter, and easier to install than natural stone or concrete pavers. With a low water absorption rate of 0.1 to 0.5%, porcelain doesn’t crack easily.
How much does a paver base cost?
The cost of driveway sub-base and paver materials is $4 to $20 per square foot on average, which includes the gravel and crushed stone, fabric, sand, and edging. A driveway’s paver base must be a minimum thickness of 6 to 12 inches depending on the soil composition and drainage.
How much does it cost to install interlocking pavers?
Interlocking brick pavers cost $10 to $25 per square foot to install on average. Interlocking pavers have various design patterns, such as herringbone, basketweave, or running bond. Some pavers also have grooves to assist in "locking" the joint space between them once laid.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to pave a parking lot?
Cost to pave an asphalt parking lot. Paving an asphalt parking lot costs $3 to $7 per square foot, not including marking, striping, curbing, or permits. Paving a 10-car asphalt parking lot costs $9,000 to $21,000 on average or $900 to $2,100 per space of 300 square feet.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
What types of services do driveway contractors and paving contractors provide?
From installation to repair, Bengaluru, Karnataka, India driveway contractors are responsible for a variety of planning, installation, construction and driveway maintenance services.
Find driveway & paving contractors near me on Houzz
Before you hire a driveway and paving contractor in Bengaluru, Karnataka, shop through our network of over 4 local driveway & paving contractors. Read through customer reviews, check out their past projects and then request a quote from the best driveway & paving contractors near you.
Shree Ganpathi Granites & Marbles
We are the leading and prominent Manufacturer of Botam paving stone in Bengaluru, Karnataka.
Thaha Enterprises
Being the recognized name in the industry, we offer comprehensive range of Stone Paver that is the perfect option to add graceful look to the pathways or walkways. Our entire product line is easy to install and add designer look to the surroundings. Stone Paver is durable and can be easily fitted in the desired
Basant Betons
Our organization is recognized as the foremost service provider of dressed and undressed Paving Stone. This service is rendered by experts who work in close coordination with the clients to understand their specifications and accordingly chalk out and implement the suitable solutions within the promised time frame. Further, in
Maa Janki Ceramics
Our clients can avail from us a quality approved array of Pathway Stones. Offered Pathway Stones are recommended amongst the clients for its sturdiness. Moreover, one can get these products at industry leading prices.
Sri Raghavendra Flooring
Looking for Just provide a few details and we will help you get quick quotes!
How much does a driveway cost with pavers?
A driveway with grass pavers ranges between $6,100 and $12,200 or $10 to $20 per square foot. Interlocking systems like Turfstone combine the look of a lawn with the functionality of pavement.
How much does a permeable driveway cost?
A permeable paver driveway ranges between $6,100 and $24,350 or $10 to $40 per square foot. They are typically concrete, brick or stone, but gaps between the surface along with a porous gravel base underneath allow the space to absorb large amounts of rain.
What is the best material for a driveway?
Functionally, cobblestone and brick are the best driveway materials because they hold the most pressure and last the longest. Visually, natural stone and grass pavers can add a unique look. Grass and permeable pavements are best for water drainage.
How much does pavers cost?
Driveway pavers cost between $10 and $50 per square foot. Assuming a standard 16-by-38-foot surface area, the total cost ranges between $6,100 and $30,400, or $17,000 on average. Depending on the exact material and location, that price can increase to $80 per square foot, or $49,000 total.
How much does a concrete paver cost?
The $6,100 to $15,200 or $10 to $25 per square foot price make concrete pavers an affordable option for this type of driveway. They have a strength rating of about 9,000 PSI. A variety of shapes and designs help you create a custom look.
How much does it cost to install pavers?
Expect to pay between $10 and $50 per square foot for installing driveway pavers. The cost of materials ranges from about $2 to $20 per square foot if using typical mid-grade stones or brick. That price increases with fancier and more intricate brick designs.
How much does it cost to build a cobblestone driveway?
Expect to pay between $12,200 and $42,600 or $20 to $70 per square foot for a cobblestone driveway. It's among the most expensive options but comes in a wide range of styles, colors, and textures. Combining small and large pieces can result in unique patterns.
Excellent Pavers And Tiles
We are highly acknowledged organization engaged in presenting remarkable range of Designer Section Paver Block.
Icon Pavers India Private Limited
Matching up with the requirements of our clients, we are involved in offering Landscape Paver Block.
Vishal Tiles
SITE NO.18 SY. NO.6, MUNIRAJU.M SULIKERE PALYA, SULIKERE POST KENGERI HOBLI, Sulikere, Bengaluru - 560060, Dist. Bengaluru, Karnataka
Technic Pavers, Expresso Auto Service
SY. No 10 And 11, Giddenahalli Village, Technic Anekal Taluk, Attibele, Bengaluru - 562107, Dist. Bengaluru, Karnataka
What is the current condition of construction site in Bangalore?
CURRENT CONDITION AT CONSTRUCTION SITE: The condition of the Site can change within a short period, which can increase the cost of construction in Bangalore. The Site may witness heavy rain, which can cause soil erosion, among other difficulties that can add to the price.
What percentage of the cost of a construction project should be apportioned for the unexpected cost that may arise
Even after all the planning, there is so much that cannot be foreseen in a construction project. 10 percent of the cost of the project should be apportioned for the unexpected cost that may arise during the execution of the project.
What are the cost factors for a house?
Some of the standard house construction cost factors for a project are site work area insurance, labor insurance, and general insurance requirements for construction material. Depending on the type of construction, some plans may also have other additional costs.
Does professional guidance reduce cost of construction?
However, to the contrary, professional guidance can reduce the cost of construction or keep cost escalation at bay rather than increase it. So, let’s discuss some points on how an Architect helps in reducing the cost of construction while building a residential house or a residential complex.