Cost of Driveway Pavers
| Driveway Pavers Costs | Zip Code | Sq. ft. | |
| Driveway Pavers – Material Prices | $1475.00 - $1600.00 | $1662.50 - $1725.00 | $1762.50 - $2037.50 |
| Driveway Pavers – Installation Cost | $1062.50 - $1087.50 | $1125.00 - $1162.50 | $1450.00 - $1500.00 |
| Driveway Pavers – Total | $2537.50 - $2687.50 | $2787.50 - $2887.50 | $3212.50 - $3537.50 |
| Driveway Pavers – Total Average Cost per ... | $10.45 | $11.35 | $13.50 |
How much does a paver driveway cost?
How much a paver driveway should cost. Average costs and comments from CostHelper's team of professional journalists and community of users. A professionally installed interlocking concrete paver driveway typically costs about $6-$20 or more a square foot, or $1,800-$4,500 for a 12'x25' driveway or $5,800-$14,500 for a 24'x40', depending on the pavers chosen; the complexity of the design; the ...
How much does is cost to pave a driveway?
I will break the costs down to explain why.
- Let us work on an average driveway size which could be 15 m long by 6 m wide. ...
- A very good price to pay for bevel paving bricks is around R 110 per m² ex Factory
- In my scenario I am pretending the site is 10 km from the Factory.
- Getting the paving to site would mean I would have to hire a delivery truck to get the approximately 4000 bricks there. ...
How much to install pavers by square foot?
What type of material you choose for your pavers is one of the biggest components used to calculate the cost to install pavers in your yard, garden, or as a complete patio. For the labor to install pavers alone, be prepared to pay approximately $50 to $80 per hour, which translates to around $4 to $11 per square foot.
How much does it cost to install pavers?
Your paver installation cost will typically range from $8 to $25 per square foot. For higher-end paving stones, prices might be as much as $50 per square foot. Below is a paver cost estimator based on some of the most common patio sizes. 6x10 (60 sq. ft.): $480–$1,500 (average) / ~$3,000 (high-end cost)
Is it cheaper to lay pavers or poured concrete?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
How much does 200 sq ft of pavers cost?
Cost Estimator by SizePATIO SIZEAVERAGE COST ($11.34 per square foot)TYPICAL PRICE RANGE ($8.69 to $22.18 per square foot)100 square feet$1,134$869 to $2,218150 square feet$1,701$1,304 to $3,327200 square feet$2,268$1,738 to $4,436250 square feet$2,835$2,173 to $5,5455 more rows•Jun 9, 2022
How much is 1000 sq ft of pavers?
LaborLabor cost (outstanding crew with 25+ years of experience)400 sq ft x $8.00/sq ft$3,200.00Labor cost (outstanding crew)400 sq ft x $6.01/sq ft$2,404.00Labor cost (good crew)1,000 sq ft x $5.35/sq ft$2,140.00
Are pavers cheaper than asphalt?
Summary: Paver Driveway vs Asphalt Driveway Asphalt is cheaper than pavers in up-front installation costs. Pavers are lower maintenance and generally have a longer lifespan. You have more design and visual variety options with pavers.
Can you install pavers over concrete?
Fortunately, you can put pavers directly over existing concrete. It's a common practice and a great way to upgrade your concrete surfaces. While mortar is preferable when installing pavers, it's possible to put in the pavers without mortar (although it puts you at risk of drainage issues and cracking).
Do pavers add value to your home?
When homeowners invest in a paver patio, they can expect extreme durability, minimal maintenance and — you guessed it — added value to their home. According to Inman, a leading real estate news source, patio additions to homes (when done properly) can deliver a return on investment of anywhere between 30% to 60%.
How much does a 20x20 paver patio cost?
A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
Is stamped concrete more expensive than pavers?
In terms of upfront cost, poured and stamped concrete tends to be the cheaper option. Concrete is fairly inexpensive, and you can cover a large plot of the land fairly quickly. Pavers are more expensive since each tile needs to be purchased individually. You will also pay more in labor costs for installation.
How long do pavers last?
A properly installed and maintained concrete paver driveway can be expected to last 25 to 50 years.
Is a paver driveway a good idea?
You should definitely go with pavers instead of concrete for your driveway because: They can be significantly stronger than concrete because they're less prone to cracking. If one of your pavers becomes worn-out, you don't have to replace the entire driveway, but just an individual paver.
Is a paver driveway better than concrete?
Paving stones are more durable than concrete and can withstand more pressure per square inch. Whether you use cement pavers or want stone driveway paving, paving bricks and stones are typically stronger than concrete and can hold more weight on the surface before a crack shows up.
What is better for a driveway concrete or pavers?
For driveways, pavers are the best choice because of their curb appeal, longevity, and durability. While concrete is more affordable, it can crack over time or if the ground beneath shifts. If this happens, it'll need replacing, requiring a second substantial outlay.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.
How much does a driveway cost with pavers?
A driveway with grass pavers ranges between $6,100 and $12,200 or $10 to $20 per square foot. Interlocking systems like Turfstone combine the look of a lawn with the functionality of pavement.
How much does pavers cost?
Driveway pavers cost between $10 and $50 per square foot. Assuming a standard 16-by-38-foot surface area, the total cost ranges between $6,100 and $30,400, or $17,000 on average. Depending on the exact material and location, that price can increase to $80 per square foot, or $49,000 total.
How much does a permeable driveway cost?
A permeable paver driveway ranges between $6,100 and $24,350 or $10 to $40 per square foot. They are typically concrete, brick or stone, but gaps between the surface along with a porous gravel base underneath allow the space to absorb large amounts of rain.
What is the best material for a driveway?
Functionally, cobblestone and brick are the best driveway materials because they hold the most pressure and last the longest. Visually, natural stone and grass pavers can add a unique look. Grass and permeable pavements are best for water drainage.
How much does a concrete paver cost?
The $6,100 to $15,200 or $10 to $25 per square foot price make concrete pavers an affordable option for this type of driveway. They have a strength rating of about 9,000 PSI. A variety of shapes and designs help you create a custom look.
How much does it cost to install pavers?
Expect to pay between $10 and $50 per square foot for installing driveway pavers. The cost of materials ranges from about $2 to $20 per square foot if using typical mid-grade stones or brick. That price increases with fancier and more intricate brick designs.
How much does it cost to build a cobblestone driveway?
Expect to pay between $12,200 and $42,600 or $20 to $70 per square foot for a cobblestone driveway. It's among the most expensive options but comes in a wide range of styles, colors, and textures. Combining small and large pieces can result in unique patterns.
How much does concrete cost per square foot?
Concrete slabs typically cost about $ 6 per square foot (installation included), so although relatively cheaper than some of the options above, when maintenance and repair costs start to kick in, they become the more expensive choice. Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics.
What are the advantages of pavers over concrete?
Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics. Visually speaking, paver designs are much more beautiful. This appeal can be explained by the fact that pavers come in different colors, shapes, and textures.
Why do pavers shift?
The soil, due to natural characteristics, tends to shift. Pavers’ installation allows it to be malleable to the ground, and these variations are unlikely to affect them. Concrete slabs, on the other hand, don’t have this same flexible characteristic.
How long do pavers last?
Here are the good news, with periodic maintenance, pavers last for decades without requiring any heavy maintenance.
Why do we need pavers?
Pavers allow you to be creative in your design, so you hardly will find a project similar to yours. Pavers allow you to add a personal touch, whether on your driveway, walkway, around the pool, a living space, in short, the options are countless.
Is it cheaper to replace a concrete slab?
Therefore, it’s clear that although it appears that the cost of a concrete slab is cheaper, eventually, it becomes more expensive in the long run.
Can concrete be stamped?
Although concrete can also be stamped to resemble pavers, it’s not even close to the real deal. Durability. Both, pavers and their installation process, have been developed to last for decades and continue to look as if just recently installed. The soil, due to natural characteristics, tends to shift.
How much does it cost to dump a 1,000 square foot driveway?
The price for each dirt load comes out to approximately $160 and $121 for each concrete load.
How much does a stone cost per square foot?
Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax. Prices vary depending on the manufacturer, style, or texture that you choose. When installing pavers, you will have to account for wasted paving stones.
What materials are needed for pavers?
When considering the materials needed for a paver installation, you will be looking at the following: 1 Pavers 2 Class II Road Base 3 Geotextile Fabric 4 Bedding Sand 5 Concrete 6 Joint Sand
What is the difference between pavers and labor?
Labor. The one cost of any paver installation that will make the biggest difference is the quality of labor. This is where the saying “you get what you pay for” comes into effect If you are looking for a quality paver installation. For guaranteed quality, you should work with installers with the most experience.
How much does geotextile fiber cost?
The cost of the fiber is roughly $0.37 per square foot (taxes included).
How much does a paver cost?
Pavers cost between $1 and $15 per square foot , with most homeowners spending $2 to $4 per square foot on average depending on the size, material, style, and texture. Paver material choices include clay bricks, concrete, natural stone, cobblestone, rubber, plastic, and more.
How much does it cost to install a paver patio?
A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
What is the difference between cobblestone and interlocking pavers?
A cobblestone paver driveway costs more but lasts the longest, while interlocking pavers provide the best solid surface. A driveway for heavy vehicles costs more, because the base must include 6”– 12” of aggregate compared to the pedestrian 4” – 6”.
How much does a slate patio cost?
Slate patio pavers cost $5 to $10 per square foot on average or between $15 and $20 per square foot installed. Slate is another stone paver that is usually larger in size and square, making installation faster. Their nonslip properties are excellent for patios that surround a pool.
How much does an interlocking paver cost?
Interlocking paver blocks cost $2 to $8 per square foot on average and typically come pre-sealed. They are installed quickly, can be used immediately, are stronger than a concrete slab, require little maintenance, and last up to 30 years. Modular pavers cost $2 to $7 per square foot on average.
How much does it cost to install concrete slabs?
A concrete slab costs $4 to $8 per square foot and is cheaper than pavers unless you add coloring or stamping. Installing pavers costs $10 to $17 per square foot or about twice as much as laying concrete. Pavers are easier to repair, and concrete slabs are more affordable.
How much does porcelain pavers cost?
Porcelain pavers cost $5 to $10 per square foot on average or $12 to $20 per square foot installed. Porcelain pavers support heavy foot traffic and have a slip-resistant matte finish. Their impermeability makes them stain and frost proof and able to withstand de-icing chemicals in northern climates.