Full Answer
How much will a driveway cost UK?
Based on the average driveway size of just 60m2 you could expect to pay around £2,106 for this, with installation and other materials on top. If you're looking for a modern twist on the traditional block paving, Marshalls Coppice is £28.02 per m2, costing around £1,883 to cover a driveway of 60m2.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How do you calculate a driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How do I make a budget driveway?
20 driveway ideas on a budgetBrick. Installing bricks on the driveway is one of the best options for shorter driveways. ... Grated asphalt. ... Tar-and-chip. ... Edged stones. ... Concrete. ... Pavers/Block paving. ... Cobblestone. ... Permeable driveway.More items...
What is the easiest driveway to install?
Tar and Chip Driveway Tar and chip driveways are a durable option. It has a base of gravel, is topped with asphalt, and finished with pretty and durable stones. The idea is for the driveway to last a long time and require less maintenance than other driveway types.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Is replacing a driveway a good investment?
You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.
How much will my concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
What is the maximum grade for a driveway?
Lower slopes of 1 percent, or 1 foot rise over 100 feet, may be acceptable, but in locations with heavy precipitation, runoff drains slowly and is more likely to collect. The maximum grade for a driveway is 25 percent, or 25 feet rise over 100 feet. Transition zones are recommended for driveways that steep.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How do I figure out how many tons of gravel I need?
To determine how many tons of gravel you need, you would first find out what the square footage of your project is by multiply the length by width by depth.
How To Convert Cubic Feet Into Tons
If your supplier sells materials such as gravel and aggregate by the ton, you would calculate the tons needed by dividing cubic feet by 21.6 (the amount of cubic feet in a ton).
How Much Does A Cubic Yard Of Gravel Weigh
One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. One U.S. ton equals 2000 pounds, so a cubic yard of gravel could weigh up to one and a half tons. On average there are .8 yards in a ton.
Some Quick Gravel Driveway Basics
There are a lot of crushed aggregate size and color options for a driveway. The best size gravel for a driveway is a minimum of 3/8″, which should be large enough to prevent gravel from lodging into vehicle tire grooves. Smaller gravel sizes are better for sub-bases.
How much gravel do I need for a 2 car driveway?
According to Reference.com, the average single-car driveway is 10 feet wide by 20 feet long. The average double car driveway is 20 feet wide by 20 feet long.
How wide should a driveway be?
A gravel driveway should be at least 10 feet wide. If you will be pulling a trailer or driving heavy equipment you will want the gravel driveway to be at least 12 feet wide, if not wider.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot to install. A 12×25 (1-car) gravel driveway costs $300 to $900, and a 24×24 (2-car) driveway is $600 to $1,800. Costs depend on the size and depth, gravel type, soil conditions, labor, excavation, grading, permits, and optional grid stabilization.
How much does a white gravel driveway cost?
A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for less-expensive white stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and sometimes pea gravel. White gravel shimmers in the light, and can cause a glare on sunny days.
How much does a caliche driveway cost?
A caliche driveway is $1.17 to $6.62 per cubic foot, which is $31 to $178 per cubic yard, or $48 to $253 per ton. The cheapest caliche is available near the deserts it comes from in the Southwestern United States.
How long does a gravel driveway last?
A gravel driveway with a well-built foundation can last for up to 100 years if well-maintained.
How much does gravel cost?
Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much does gravel cost per square foot?
White gravel shimmers in the light, and can cause a glare on sunny days. Black gravel driveway rocks from 0.50" to 1" in size cost $3 to $10 per square foot, $96 to $140 per cubic yard, or $76 to $85 per ton. Black lava rocks are the most common and affordable, while true-black granite chips are rare.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.