Cost of Concreting a Driveway in Australia
| State | Concrete Driveway Cost per m2 |
| Western Australia | $42 to $45 |
| New South Wales | $41 to $45 |
| Queensland | $37 to $40 |
| South Australia | $36 to $40 |
Can I use the Australian concrete driveways calculator?
The Australian Concrete Driveways calculator feature is strictly for prospective client use and should only be used as a tool for budgeting. Prospective clients should contact Australian Concrete Driveways for a quote based on their specific needs.
How much does it cost to build a driveway?
The cost of the driveway also depends on the slope. Concreting on a flat surface costs $65 to $85 per square metre. If the driveway is sloping, the cost is about $10 more per square metre.
What is included in the driveways2u cost calculator?
*The Driveways2U cost calculator is used as a tool for indicative budgeting only. Calculations do not include items such as council works, kerb, layback, excavation, removal of fill, concrete pump, expansion cut, sealing and stormwater channels, drains or pits.
What is the most affordable type of driveway?
As one of the most affordable options, a plain concrete driveway is a good benchmark to use when you calculate the cost of a new driveway. With that as your lowest price point, you'll be better able to judge the true value of more decorative paving options.
What is the cheapest driveway surface Australia?
Gravel driveways are by far the cheapest driveway option in Australia. Often able to be laid without professional assistance, a gravel driveway will set you back around $15 per square metre, depending on your gravel of choice.
What is the cheapest type of driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How many SQM is a driveway?
On average, concreting a driveway costs $55 to $70 per square metre on a flat surface. If the surface is sloping, the cost will be about $10 more per square metre. The average driveway is three metres wide and may be about six metres long. At that size, a driveway would be 18m2.
How much should I charge to pour a driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000, or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement, and removing the existing surface can all influence that range.
How much does a concrete driveway cost Australia?
The average cost for a concrete driveway per m2 in Australia is approximately $65. This price also includes the cost of materials and labour. However, the pricing range can go up to $195 per square metre, so for a concrete driveway area of 20m2 expect to pay between $1300 to $3900.
How can I save money on my driveway?
One of the best ways to save money is to use loose materials such as gravel, stone, or tar-and-chip (macadam) for your driveway surface.
How do you concrete a driveway in Australia?
How to build a concrete driveway?Step 1 - Check for underground utilities. ... Step 2 - Survey your land and know your boundaries. ... Step 3 - Mark your project area and stake out boundaries. ... Step 4 - Excavate topsoil and level out project area. ... Step 5 - Lay wooden forms around the project area, anchored with stakes.More items...•
How much is concrete per sqm Australia?
The cost of a concrete house slab per square metre in Australia ranges from $64 to $108 and most commonly the price depends on the thickness of the concrete slab as well as the location you are living in.
How much does it cost for a house slab Australia?
The cost of a concrete slab will generally be calculated based on how big the area that needs to be covered is, and you'll typically pay between $75 and $110 per square metre, according to tradie listing site, hipages.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How much does a concrete driveway cost in Australia?
In Australia, it is likely to cost around $2,000 for a concrete driveway measuring 30 square metres. This translates to about $65 per square metre. The figures quoted are inclusive of labour costs as well as materials. There are a few factors that drive the cost of a concrete driveway in Australia. These include the following:
How much does it cost to remove a sloped driveway?
A sloped driveway. Existing driveways that require excavation and removal. You may be required to add $10 per square metre for a slanting driveway. Removals and excavations cost $95 – $95 more per square metre.
How wide is a driveway in Australia?
Many local councils in Australia specify a minimum width of 3 metres. If the driveway is 3 metres wide and 6 metres long, it will be 18m2. Concrete driveways must be thicker than concrete paving, with 125mm specified in many areas.
What is a concrete driveway?
A concrete driveway is simply an entry point to a property that is strong enough for cars and other vehicles to drive on. Concrete is a strong and hardwearing materials, so a great choice for a driveway.
How much does concrete stamping cost?
Simple patterns cost between $88 and $132 per square metre. On average, the cost is around $120 per square metre plus GST.
What does a stencil driveway look like?
A stencilled driveway can look like natural stone, with the plain concrete in-between the stencilled pattern looking like grout lines between coloured bricks or pavers. Usually, spray-on concrete is used, but sometimes it's spread over the surface.
How much does it cost to stencil a concrete driveway?
On average, concrete stencilling a driveway costs between $3000 and $4500 depending on the complexity of the design and the size of the driveway.
How long does it take for a concrete slab to dry?
The concrete is left to dry for three days, then a pressure washer is used to remove any remaining release agent and dust.
What causes potholes in a driveway?
The most frequent cause of potholes is erosion under the concrete. When a void appears, the concrete will crumble. All things considered, the actual cost of an 18m2 driveway may be more like $2600 for a flat surface or $2800 for a sloping surface. Add another $250 or more if the slope is steeper.
What is the most cost effective driveway paving?
Plain concrete is one of the most cost effective paving options for driveways, requiring little maintenance other than an occasional pressure wash. Read more: How much does a concrete driveway cost?
How long should a driveway last?
A well constructed driveway should last for at least 20 years, but it needs to be installed properly otherwise you will be repairing it within a few years.
What is a base for a driveway?
A base is part of the prep work done before your driveway surface is laid. Depending on the type of driveway and paving material, this is typically a crushed sandstone which is compacted with a roller. You could also have a concrete base.
What is the difference between exposed aggregate and brick pavers?
Exposed aggregate concrete is another popular decorative effect achieved by adding stone to concrete, and is a durable surface for the long term. Brick: Brick pavers not only look great, but they don’t need a lot of maintenance either. A pressure wash a couple of times of year should be enough.
Why do you need a concrete base for a driveway?
You could also have a concrete base. This ensures that your paving has a stable base to rest on and is crucial to the longevity of your driveway. Drainage is also installed with the base to ensure stormwater runs off to an appropriate drain. #hiptip: Your paving needs a stable base to rest on, and is crucial to the longevity of your driveway.
Is brick a good base for a driveway?
Brick needs a good base for it to last as a driveway, bearing mind the vehicle traffic it needs to withstand. Gravel: Gravel, though not strictly a paving material, is a relatively cheap surface for level driveways and rural properties, though it does have its drawbacks. Gravel needs regular maintenance, can be dusty and may need to be weeded.
Is concrete driveway good?
As one of the most affordable options, a plain concrete driveway is a good benchmark to use when you calculate the cost of a new driveway. With that as your lowest price point, you'll be better able to judge the true value of more decorative paving options. Expect to pay:
How much does it cost to pave a driveway?
A starting a price of A$70 per square meter for brick pavers and A$75 per square meter for natural stone pavers.
How much does it cost to build a concrete driveway?
The price of building a driveway starts from around A$50 per square meter and it can go up to A$150 per square meter.
When is the best time to renovate a driveway?
Driveway renovations are best done during the summer months. As the work will continue for a couple of days, good, rain-free weather is needed. The price of the renovation will vary depending on the materials used for the new driveway.
Is gravel good for a driveway?
Choosing gravel for your driveway is the best budget option. It’s a great option for both small and large driveways. Gravel requires little maintenance. Raking it twice a year, occasional weeding and moving of the gravel towards the middle of the driveway is more than enough to keep your driveway in good condition.
How long does a driveway last?
A well-constructed driveway may last over 20 years as long as it is installed and paved properly. Paving and concrete have aesthetic and durable benefits while asphalt as a material for your driveway provides many benefits. Asphalt is commonly used for constructing roads, basketball courts, parking lots, and yes, even your driveway.
Why is it important to lay asphalt in your driveway?
Asphalt laying in your driveway is important. The driveway is one of the areas people tend to overlook when it comes to improving or constructing their homes. As part of the entranceway to your home, your driveway also deserves to have that TLC to add more appeal and increase the property value of your home.
What is asphalt used for?
Asphalt is commonly used for constructing roads, basketball courts, parking lots, and yes, even your driveway. It is durable, low maintenance, and affordable. Asphalt comes in different types of applications and they are categorised by the mixing process. These are warm mixed asphalt, mastic asphalt, and hot mix asphalt and vary in costs.
Does asphalt resurfacing increase the cost of a driveway?
However, if you want something unique or modern, this will increase the asphalt driveway cost. Also, for new asphalt laying projects, site preparation or excavation may be required increasing costs. But if you already have an existing driveway, then asphalt resurfacing may be all you need.
Is asphalting a basketball court the same as laying a driveway?
Asphalt contractors may visit and look at your location to provide you the cost of the asphalt per square metre. Different methods cover asphalt laying. Asphalting a basketball court is not the same for a driveway hence it is more expensive because it is hard and complicated to work on.
Can I lay all my driveway at once?
Additional areas: if you have a walkway or carport that you want to be incorporated with the driveway, then expect to pay more. However, it is more cost-effective to plan to do all asphalt laying at once – so plan your driveways and paths etc to occur at the same time.
Do I need to pay for excavation?
Excavation: you may need to pay for additional costs for the removal and disposal services especially if your driveway needs excavation and leveling before your asphalt laying project.