How much does it cost to pave a driveway?
13 rows · 20/08/2018 · The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving ...
Is an asphalt driveway cheaper than concrete?
10/06/2020 · Most contractors charge between $12.00 to $17.00 per square foot to install an asphalt driveway. However, there are some factors that could increase the asphalt paving labour cost estimate. For example, if the company has to excavate your driveway first, it could cost you up to $5,100.00 more depending on the size of your driveway.
How much does asphalt cost per ton?
08/06/2018 · Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does it cost to heat a driveway?
A typical asphalt driveway can cost $4,000 to $8,000 and up, but most spend about $4,500 on the project. Several factors influence this cost, learn more about how much your asphalt driveway could cost.
What are the benefits of asphalt driveways?
Other benefits of installing an asphalt driveway include: 1 Ready to use within a few hours after installation 2 Durability 3 Aesthetics 4 Easy to maintain 5 Easy to repair 6 Materials are recyclable 7 Cold temperature resistant 8 Versatile 9 Does not stain easily
What is the best material for a driveway?
There are two main types of driveway material: asphalt and concrete. Many homeowners choose asphalt not only because the finished product looks nice, but the asphalt paving cost estimate is considerably cheaper than a cement driving pad. Other benefits of installing an asphalt driveway include: Ready to use within a few hours after installation.
How many square feet does a ton of asphalt cover?
One ton covers between 40 to 80 square feet. Average driveway requires 7.5 to 15 tonnes of asphalt. Asphalt paving costs per square foot depend on the cost for manufactures to produce asphalt. For example, when petroleum prices increase, it costs manufacturers more to produce asphalt so the price for consumers also increases.
Does adding drainage lines increase labor costs?
Adding drainage lines, difficult to get to locations, regional price variations, and required permits will also increase the labour costs. Always do your research before hiring an asphalt company to work on your driveway.
How much does it cost to install an asphalt driveway?
Most contractors charge between $12.00 to $17.00 per square foot to install an asphalt driveway. However, there are some factors that could increase the asphalt paving labour cost estimate. For example, if the company has to excavate your driveway first, it could cost you up to $5,100.00 more depending on the size of your driveway.
Can you repair a crack in a driveway?
Many issues with the driveway can be easily repaired. This will not only extend the life of your driveway but lower the estimated asphalt paving cost per square foot. Many cracks and small holes can be easily patched or resurfaced, significantly lowering the asphalt paving cost estimate.
How thick is asphalt?
Other factors that affect pricing include thickness of the asphalt layer installed. Homeowners can get 5 cm (2 inch) or 10 cm (4 inch) of asphalt on their driveways. The thicker driving path requires more materials which also affect the asphalt paving costs estimate.
What are the different types of driveways?
Then we’ll take a closer look at how to calculate the cost of an asphalt driveway. Types of driveways include: asphalt. b rick.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
Is asphalt a good driveway material?
Asphalt is a common driveway material. It’s reasonably durable (20 years), relatively inexpensive (compared to concrete) and if you’re willing to invest in dressing it up with special surfaces, it can look really good.
What is crushed stone?
Crushed stone is similar to a gravel driveway. However, crushed stone usually has a larger bottom layer with crushed stone on top. This creates a smoother more uniform appearance. Crushed stone is available in many types, so you have a wide variety of choices.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
Is concrete more expensive than pavers?
Poured concrete is more common and less expensive. A concrete slab is poured and then allowed to dry. Designs can be stamped in the wet concrete, or color can be applied. A paver driveway offers a beautiful drive at a cost. It comes ready to install in individual pieces, similar to bricks, but made from concrete.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look. There are a few downsides to a gravel drive.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,793 on average, with a typical range between $2,966 and $6,666. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include: 1 Sidewalk/Walkway: $2,100-$6,500 2 Backyard Blacktop: $3,500-$32,500 3 Private Road: $84,000-$468,000
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
How much does hot mix cost?
Hot mix asphalt costs $100 to $200 per ton. This is the standard type for all-weather surfacing and repairs. Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. Cold mix isn’t designed for the whole surface because it lasts for one or two seasons.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How much does asphalt curbing cost?
Asphalt Curbing. Asphalt curbing costs $975 to $1,625. At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet.
How much does a game court cost?
The average game court is 500 square feet, which translates into a price of $3,500 to $6,500. Playgrounds can be 500 to 2,500 square feet, so they run $3,500 to $32,500.
How much does it cost to repair a concrete slab?
Plan to inspect regularly for cracks, especially around the concrete’s expansion joints. Concrete repair costs $1,400 on average. Most homes require this additional step before they can do this project.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
What is a base for a driveway?
Bases create a firm foundation and proper drainage for your driveway. Imagine concrete pavers installed on topsoil — one good rain, and they’re floating on mud. Base materials such as crushed gravel or granite allow water to flow through without straining the concrete or asphalt.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
Is gravel driveway hard?
Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it. Traditionally, gravel driveways are more prevalent in rural areas where the rustic look adds to a home’s charm.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
Can rain pour on concrete?
Rain pouring on concrete or asphalt acts differently. On a perfectly flat driveway, it can accumulate, creating a hazard and causing the surface to deteriorate — while on an improperly graded driveway, it can move like lightning toward buildings and roadways where it contributes to flooding.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
What is the best material for a driveway?
This starts with choosing the right material. One of the most popular paving materials on the market is asphalt, commonly praised for its appearance, durability, and relatively low cost.
How much does it cost to pour a concrete driveway?
With delivery, the total cost will be around $1000. The cost of pouring a concrete driveway depends on the quality of the concrete.
How long after a driveway is poured can you drive?
It is recommended to wait between 48 and 72 hours after the asphalt has been poured before you drive, park, or walk on it.
How long does it take for a driveway to seal?
Your instinct may be to seal your driveway as soon as it's installed, but sealing it too soon actually does more harm than good. Wait until the full 6 to 12 month asphalt curation period has ended before sealing your driveway.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much asphalt does a tandem truck carry?
Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance. Bulk asphalt cost per truckload - chart.
Is it good to have a rough idea of paving?
Well, there are several attributes of an asphalt paving project affecting your budget. Obviously, having a rough idea before you move forward with your project is good. It gives you an approximate idea of expenses and prevents unnecessary expenses.
Can you reuse asphalt?
Well, go for one ensuring durability to your pavement. Also, you can reuse the previous asphalt of your pavement as the base layer. It will reduce the overall Driveway Paving Cost.