Why choose pre-cut tint film?
With advanced software and precision cutting machines, pre-cut tint film will give you a great finished product with half the work. If you are a perfectionist with a steady hand, whole tint sheets are the only way to ensure a truly custom job - custom to your vehicle because you did the cutting based on the measurements made on your own vehicle.
Do you need to heat shrink window tint?
Before we even begin you may be wondering why anyone would want to heat shrink window tint in the first place and you wouldn't be wrong for asking. Simply put, no one wants the hassle of heat shrinking but, unless you intend to apply tint as a number of strips to cover a concave surface, then heat-shrinking is a necessity. So, just what is it?
Do pre-cut kits shrink?
Many pre-cut kits will also claim to be pre-shrunk, but don't be fooled. To get the most professional-looking results possible, you must shrink the film yourself. Pre-cut kits are cut from databases, rather than from the measurements taken on the actual vehicle.
Can You tint over metalized film?
You can still get a good tint with dyed films, but the heat reduction isn’t particularly high, and the dye in the film will fade over time. Metalized film is infused with small metallic particles and gives the glass a very shiny, reflective surface.
How do you shrink pre-cut window tint?
4:236:19Pre Cut Window Tint Kit--Heat Shrinking Curved Window - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it on the first thing you want to do is make sure it's warm it takes 20-30 seconds to reachMoreTurn it on the first thing you want to do is make sure it's warm it takes 20-30 seconds to reach peak temperature if you start right away that the heat gun maybe pathway warm and it won't shrink well.
Is Shrinking window tint necessary?
Simply put, no one wants the hassle of heat shrinking but, unless you intend to apply tint as a number of strips to cover a concave surface, then heat-shrinking is a necessity.
Is pre-cut window tint easy to install?
2:038:38Installing Pre-Cut Tint Kits - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the main tools that you're gonna be using for this for the installation. Process is you're goingMoreSo the main tools that you're gonna be using for this for the installation. Process is you're going to be using a platinum easy reach you're also going to be using a yellow turbo.
How do you use pre-cut tint?
2:2913:51How To Install Precut Window Tint - With Gasket In - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have your pre-cut window film and you make sure that the clear release liner is on theMoreOnce you have your pre-cut window film and you make sure that the clear release liner is on the outside and the window tint is on the back side and it is the same shape as this window.
Can you shrink tint with a hair dryer?
3:1510:24Can You Tint Windows With a Hair Dryer? - YouTubeYouTubeStart of suggested clipEnd of suggested clipYeah that'll work it's shrunken up.MoreYeah that'll work it's shrunken up.
Do you need a heat gun for window tinting?
The heat gun is not necessary, but will make the tint look smoother. If you decide to use a heat gun window tint application, apply it to the outside so you don't melt the film. Use your spray bottle full of hot water to spray on the glass to make it easier for your squeegee to smooth it out.
Is 35 percent tint dark?
Window Tint Darkness The 2022 California window tint laws requirements are for the front windshield and front side windows to have a 70% VLT. California car window tint law has no restriction on how dark the tint on the rear and back side windows can be.
How do you install precut rear window tint?
1:2410:22How to Install a Complete Precut Window Tint Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd often that is the back window grab the pre-cut piece for the back window. And take it over toMoreAnd often that is the back window grab the pre-cut piece for the back window. And take it over to the vehicle. Put the bottom half on the main flat area first.
Can you put a tint over a tint?
It is not advised to install window tint over existing aftermarket window tint. Tinting over tint is not a great idea for quite a few reasons. The adhesive in window tint is meant to adhere to glass, not other window film so it is best to remove any existing window film before applying new tint.
What size roll of window tint do I need?
What size roll should I buy? If you are just starting out window tinting and looking for the most cost effective sizes, we recommend buying a 40” and a 24” wide roll. The 40” will cover every back window and most car windows which are less than 20” wide.
What's the legal limit for Window Tint in Texas?
25% VLTWindshield: 25% VLT tint is allowed above the manufacturer's AS-1 line or top 5 inches, with less than 25% reflection. Front Side windows: Must allow more than 25% of light in. Back Side windows: Any darkness can be used. Rear Window: Any darkness can be used with side outside mirrors, 25% VLT without.
What are ceramic tints?
Ceramic Tint is an advanced type of window tint designed for maximum heat and UV protection. It's main difference between a regular, entry level type of window tint is its performance when it comes to blocking sunlight & solar heat.
How to get tint off of windshield?
Begin by taking an uncut piece of tint, spray both sides with soapy water and lay it on outside of the rear windshield liner-side up. You will then squeegee a horizontal anchor onto the film to gather all the excess film into "fingers" at the top and bottoms of the window.
What to do after film has been shrunk?
After the film is has been heat shrunk you will then need to the process with a hard card as opposed to the towel or cloth. Trim the film to shape and flatten any newly arisen fingers with a hard card as new ones can occur after the film has been cut.
Does window film shrink?
One important consideration to keep in mind is that window film will only shrink correctly towards the factory straight edge.
Can you use too much Johnson's baby shampoo?
You can never use too much solution! It is best to use a premixed window solution but you can make your own. We recommend using 3% Johnson’s Baby Shampoo and 97% distilled water.. With the film and glass wet apply the precut piece on the inside of the windows only, never on the outside.
Does tint film come with a clear liner?
The film comes with a clear liner attached to the tint to protect the adhesive. Always peel the excess tint AWAY from the precut shape first, leaving the precut piece on its clear liner. VERY IMPORTANT! When peeling off the precut piece, wet the adhesive side of the tint with application solution.
How thick is window tint?
Thickness. Window tint films of all varieties come in 1- and 2-ply thicknesses. A ply is typically 1mil (1/1000 th of an inch), so 2-ply films are about 2mil. Thickness can imply quality and durability, but it isn't always necessarily true.
Why do tints have a matte look?
A majority of this heat is transferred to the glass, where it is dissipat ed naturally. Dyed window tints won't make your car interior warmer, but the absorption means that it isn't as effective at keeping your cabin cool.
What is metalized window film?
It consists of an adhesive layer and a protective outer layer with a UV-protective layer and a metalized layer in between.
What is the best way to protect your car from sunlight?
Applying darker precut tint to your car windows is the easiest, most effective way to protect your car's interior from harmful sunlight and prying eyes. As with most car modification and repair projects, you have two choices for installing your window tint: hiring a professional or doing it yourself.
Why do long kits last longer?
Long kits will be more difficult to install, but they last longer because they won't delaminate when you roll down your window. With a short kit, the gasket on the bottom of your window will pick at any exposed edge of your tint film, or create an exposed edge in the long run.
Why is it important to use dry adhesive on window film?
Because the adhesive isn't tacky to the touch, it should be easier to avoid getting foreign particles stuck between your window film and the glass . In general, dry adhesives will last longer and form a stronger bond, but that's not to say there's anything wrong with the pressure-sensitive alternative.
What is hybrid tinting?
Hybrid tinting film aims to combine the best features of dyed window film and metalized window film, leaving all of the drawbacks behind. The layer of dye will help give it the dark look that the dye film can provide , and the metalized layer will still offer some - though not all - of the UV protection of a standard metalized film.
Instructions for DIY Window Tint Installation
People tint their cars for a variety of reasons. If you live in a hot state, sometimes the sun can be brutal and it’s nice to shade it out a bit with some tint. You may have a medical condition that gets triggered by intense sunlight, like lupus or arthritis. You may want some privacy, or maybe you just think a good tint job looks awesome.
Can I tint the glass on my car?
Once you’ve got an idea of how dark you want your tint to be, take a look at your glass and see how easy it’s going to be to tint. If it has cracks or chips, it shouldn’t be tinted. If it’s already got tint on it, remember that you’ll have to remove that first. Very old film can be a huge headache to get off.
My windows have old tint on them, how do I get it off?
In case your windows have old tint on them, let’s quickly go through how to get it off. The difficulty of removing old tint depends on how old it is, what type of film or adhesive used, and the shape or contour of the glass.
Choosing your tint
Dyed film is usually the least expensive, and is primarily for appearance rather than functionality. You can still get a good tint with dyed films, but the heat reduction isn’t particularly high, and the dye in the film will fade over time.
Consider your budget
As with all important projects in life, your choice will largely come down to your budget. If you’re a beginner and you feel there’s a good chance you will mess up on your first couple tries, then you might want to consider getting an inexpensive film.
Additional considerations
Try to visualize what your car will look like after the tint job and how it will all come together when you’re finished. If you have a matte paint job, maybe you want to match it with matte, carbon tint. On the other hand, you might want to contrast it with a flashier charcoal-colored metalized tint job.
