Receiving Helpdesk

dining table size in feet

by Dena O'Keefe Sr. Published 4 years ago Updated 2 years ago

Choosing the Right Dining Table Size
Size (Diameter):Oval & Rectangular Will Comfortably Seat:Round & Square Will Comfortably Seat:
4 feet (48 inches)4 people4 people
5 feet (60 inches)6 people6 people
6 feet (72 inches)6 people6 people
8 feet (96 inches)8 peopleNot a typical size
1 more row

Full Answer

What size dining table should I buy?

The recommended comfortable space per person for a typical dining table is 70cm wide (elbow room) by 90cm deep (to slide out your chair); however if you are prepared to squeeze in and get cosy for a special occasion you can get away with as little as 50cm wide per person.

What is the standard height of a dining room table?

The standard dining room table height is around 28–30 inches (71–76cm), measured from the ground to the tabletop surface. Formal dining tables tend to be closer to 30 inches, while informal dining table heights average around 29 inches tall. Older tables also tend to be lower, around 28–29 inches.

What size dining table size will fit my room?

While recommendations vary, a clearance of 36 to 42 inches from table edge to a wall or other furniture allows adequate space for seating plus a walkway behind the diners. Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.

What size dining table do you need?

Reasons to Consider a Dining Table Instead of an Island

  • Work your Walls. In an extended country kitchen, having a table rather than an island can give off a presence of more space.
  • Top your Table. ...
  • Encourage Flexibility. ...
  • Take the Weight Off. ...
  • Style it Out. ...
  • Maximize a Slim Space. ...
  • Separate Your Kitchen From Your Dining Area. ...
  • Aim High. ...
  • Celebrate Stylish Chairs. ...

What is a standard size dining table?

Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.

What is the size of a dining table for 6?

For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.

What is the size of a 4 seater dining table?

The dining table size for 4 people according to its design could be: Square Table for 4 people: the most recommended minimum size would be 36 x 36 inches, although it is more advisable to have 40 or 44 inches. Ideally, the table could be up to 50 inches per side to make a very comfortable table.

What is the standard size of a 8 seater dining table?

Standard dimensions are: To seat four people: 36- to 44-inch diameter. To seat four to six people: 44- to 54-inch diameter. To seat six to eight people: 54- to 72-inch diameter.

What is a good size dining room?

Historical trivia aside, the average size of a dining room in the US is 14 x 16 feet. Dining rooms that most would consider “generous” are 14 x 18 feet to allow for a formal table, chairs and a hutch. Homewyse.com defines the typical dining room as 200 square feet.

How big of a table can I fit in a 12x12 room?

You have room for up to a 60" round table with plenty of room to pull chairs back and to walk around the table. This will accommodate 8 to 10 people. A 48" round table will fit 6 comfortably, and you could buy one with one or more leaves to expand it if you need to accommodate larger numbers of people.

How many can you seat at a 6 foot rectangular table?

How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.

What size dining table fits in a 10x10 room?

A room that's 10 feet by 10 feet can fit a table up to 48 inches by 48 inches.

How do you measure for a dining room table?

Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3' clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12' x 9½' space, the maximum size for your table would be 72” x 40”.

What size is a 10 person dining table?

A 72” - 84” long rectangular table can seat up to 10 adults, depending on table width. A 96” - 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.

How long is a 8 person table?

Rectangular and Oval DiningPeople 2No Shared area 2' x 2'6" (61 x 76cm)Minimum Size (with shared area) 2' x 3' (61 x 91cm)44' x 2'6" (122 x 76cm)4' x 3' (122 x 91cm)66' x 2'6" (183 x 76cm)6'6" x 3' (198 x 91cm)88' x 2'6" (244 x 76cm)8'6" x 3' (259 x 91cm)1010' x 2'6" (305 x 76cm)10'6" x 3' (320 x 91cm)1 more row

How long is a 10 person dining table?

To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long. Use the rectangular table measurements for oval tables.

How high should a dining table be?

Share#N#Share on Pinterest#N#A standard dining table height ranges from 28 inches to 30 inches high depending on the type of legs or footings. This height leaves enough room for typical adults to rest their feet on the floor. This is your family dining height or formal dining room table height.

How wide should a rectangular dining room table be?

While rectangular dining room tables offer many configurations based on the number of people you want to seat, it’s recommended to choose a table that’s at least 36 inches but not more than 40 inches wide . This allows enough room for place settings and leaves enough room for passing food platters.

What is the standard size of a round dining table?

The standard round dining table dimensions for two to four people is 36 inches in diameter.

What are the shapes of dining room tables?

Dining room tables are typically designed with one of three shapes; square, rectangle, or circle. Some dining room table tops are designed using real wood in its natural state with naturally uneven edges.

How many people can fit on a square table?

Square Table Sizes. Square tables have equal length and width and typically are made for four people at the most. The standard range is 36 inches to 44 inches leaving space for up to four people with enough elbow room.

How big is a dining room?

This may be laid out as 10 feet by 20 feet. Larger dining rooms may be 14 feet by 18 feet or more.

What is round table?

Round tables are similar to square tables when it comes to fitting in a small space. The diameter, or the length from one edge to the other crossing the center, is the size used to measure round dining room tables. Not having corners allows flexibility for seating and makes it easier for diners to see each other.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9