Rectangular Dining Table Size Chart, Inches:
| Table Size, w x l | Number of persons | Room needed |
| 24'' x 24'' | 2 | 8' x 8' |
| 24'' x 42'' | 4 | 8' x 10' |
| 30'' x 42'' | 4 (6*) | 9' x 10' |
| 30'' x 60'' | 4-6 (8*) | 9' x 12' |
Full Answer
What is the most common dining table size?
When seating four people, standard dining table sizes for rectangular tables are 36 inches wide by 48 inches long. These pieces comfortably fit a small family while leaving elbow room between each diner. Twelve inches are added to the length of tables intended to seat five or six people, and 78-inch-long tables accommodate up to eight.
What are the measurements of a dining table?
Dining table width for place settings and serving pieces is a minimum of 36 inches (though it might be a little cozy). The minimum width of a table for reaching across to pass a dish is 48 inches. image credit. Dining table height is 28 to 30 inches. This measurement is pretty standard across the industry since it’s a matter of function.
How to choose the right dining table size?
- Leave about 36 inches of space from the wall to the table.
- Ideally, 42-48 inches is the perfect clearance between the table and walls.
- For an entryway or doorway, make sure the table is about 48 inches away.
What size dining table size will fit my room?
While recommendations vary, a clearance of 36 to 42 inches from table edge to a wall or other furniture allows adequate space for seating plus a walkway behind the diners. Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.
What is the standard size for a dining room table?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches....Standard Dining Table Sizes.SeatsLength10-1292-110"3 more rows•Jun 22, 2020
What size is a table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
What is the standard size of a 8 seater dining table?
Rectangular Table for 8 people: at this table we will seat two people at the head of the table and three people on each side. At a minimum we will need a table of 84 x 40 inches, although our guests will be much more spacious in a table of up to 96 x 40 inches.
How much room do you need for a 6 person dining table?
A 6 person dining table should be at least 78″ long. That's 6 feet 6 inches. The rule of thumb is to allow 24″ of space per seat at your dining table for casual seating. For more formal meals, you should allow 30″ per seat which still works with a 78″ table.
How long is a 6 seater dining table?
4 - 6 seater The most popular dining room tables seat six - which comprises of two down each side and one at each end. The average size for a 6 seater table is generally somewhere between 75 x 150cm and 100cm x 1800cm.
How many chairs can fit at a 6ft table?
How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.
How long is a table for 8 chairs?
For six to eight guests, your table should be at least 78" long. The rule of thumb is to allow 24" of space per seat at your dining table.
How long is a dining table that seats 10?
To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long. Use the rectangular table measurements for oval tables.
What is a good size dining room?
SNAG Our FREE Design Software Historical trivia aside, the average size of a dining room in the US is 14 x 16 feet. Dining rooms that most would consider “generous” are 14 x 18 feet to allow for a formal table, chairs and a hutch. Homewyse.com defines the typical dining room as 200 square feet.
How big is a rectangular table that seats 6?
This means that the minimum dimensions for a rectangular dining table for 6 would be 78" x 40" (203 x 102cm), and puts the ideal dimensions for a rectangular dining table for 6 at 96" x 54" (244 x 137cm).
How big of a table can I fit in a 12x12 room?
You have room for up to a 60" round table with plenty of room to pull chairs back and to walk around the table. This will accommodate 8 to 10 people. A 48" round table will fit 6 comfortably, and you could buy one with one or more leaves to expand it if you need to accommodate larger numbers of people.
What size table fits in a 10x10 room?
A room that's 10 feet by 10 feet can fit a table up to 48 inches by 48 inches.
Dining Table Measurements
How are rectangular dining tables measured? The standard measurement for round dining tables is width x length. See illustration below:
Rectangular Dining Table Size Chart, Inches
Size Chart for round dining tables. Table size = width x length. Room needed = width x length. Measurements in inches (see below for CM).
Rectangular Dining Table Size Chart, CM
Size Chart for round dining tables. Table size = width x length. Room needed = width x length. Measurements in CM (see above for inches).
Tips, Tricks or Questions about Dining Table Size?
Tips, tricks or questions about Dining Table Sizing? Please post it below. Thanks!
How high is a standard dining table?
Standard height dining tables sit at about 30 inches high. This allows plenty of room for your legs to fit comfortably underneath, and it’s what you’ll find in most restaurants, hotels and homes.
What is a good size table for a medium size dining room?
Rectangle tables, as well as round tables that extend to oval tables are perfect for medium-size dining spaces. You can even use dining benches to squeeze a few more people around your table.
How many people can sit at a 60 inch table?
Tables that measure 60 inches and under are best for comfortably seating up to four people. Round tables and square tables tend to fit well in small dining spaces, but you can find rectangle tables on a smaller scale, as well.
How high is a counter height table?
Counter height dining tables typically sit at about 36 inches high. These elevated designs are known to create a more casual atmosphere that inspires everyone to gather around for a good, fun time. Counter height tables are often seen in bars and pubs, which is why they’re sometimes referred to as bar tables or pub tables.
What to consider when buying a dining table?
When you’re shopping for a dining table, the size, shape, style and materials are all important features to consider. Notice how we started with size though. This is the best place for you to start.
Can you use an extension table without a leaf?
The best part is, you can use your extension table with or without the leaf, depending on the occasion and the amount of people you’re hosting.
How big is a rectangular dining room table?
The standard rectangular dining room table size when seating four people is 36 inches wide by 48 inches long. This sizing will comfortably fit a small family of four and allow for plenty of elbow room between each person seated. To accommodate more people, the length of the table increases.
How wide is a table?
Ten to twelve people: 36 inches wide by 12 feet long. While these are the standard sizes, the actual width of a rectangular table should be between 36 and 42 inches wide.
What is a square dining table?
The final dining table shape to discuss is square, perfect for creating a bistro feel in your dining area. Square tables work great in homes that seek a more contemporary aesthetic. The dimensions of these tables are best suited for box-shaped rooms with a limited amount of space. Overall, square dining tables are generally intended for a small number of people seated.
What is the difference between an oval and a circle dining table?
With both circle and oval tables, no corners make for easy navigation in close quarters and a very clear view of all the diners at the table. Oval dining tables are generally used for small rooms that still require space for four or more diners. They provide approximately the same amount of surface area as rectangular tables, while occupying much less visual space.
How much clearance between a dining room table and wall?
Individually subtract six feet from the width and the length. This will allow for the necessary three feet of clearance between the walls and table on all sides. The resulting numbers will give you the maximum suitable dining table size for your space.
What is a dining room table?
The dining table is one of the primary focal points in any home. It is here where your family and friends meet to share laughs, stories, and relish in home-cooked meals. Choosing the right dining room table means selecting the proper shape and dimension to suit your home and the amount of people who will be seated there on a daily basis.
Why do people have round tables?
Choosing a round table for your dining area can help you save on space and create a cozy atmosphere. Round tables create a nice environment for easy conversation with every seated at the table. However, if you tend to entertain a lot of people on a regular basis, round may not be the best shape for your home.
1. Based on Number of People
Use this calculator if you want to choose a dining table based on the number of people you wish to accommodate.
2. Based on Room Size
Use this calculator you want to get as big of a table as possible based on your dining room space.