Where can I get a fuel line connector?
Shop for your specific vehicle to find parts that fit. Shop at AutoZone for direct-replacement Fuel Line Connectors. Rather than replacing the entire fuel line for a fuel line repair, only fix the part that is damaged. Designed for easy installation and a precise fit for your vehicle.
How big is the fuel line connector on a Dorman?
. . Dorman 800-084 Fuel Line Quick Connector for 5/16 In. Steel to 3/8 In. Nylon Tubing, Pack of 2 . Only 1 left in stock (more on the way).
How many 800-084 fuel line connectors are left in stock?
Only 14 left in stock (more on the way). . . . . Dorman 800-084 Fuel Line Quick Connector for 5/16 In. Steel to 3/8 In.
Does AutoZone replace fuel line connectors?
Shop for your specific vehicle to find parts that fit. Shop at AutoZone for direct-replacement Fuel Line Connectors. Rather than replacing the entire fuel line for a fuel line repair, only fix the part that is damaged.
What are the types of fuel line connections?
Top CategoriesHose End Fittings.Hose & Hard Line.AN Unions, Couplers & Reducer Fittings.AN to NPT Adapter Fittings.Fuel Pump & Pressure Regulator Fittings.Tee & Y-Fittings.Hose Barb Fittings & Adapters.Cap & Plug Fittings.More items...
Can you use zip ties on fuel lines?
0:395:50Outboard Fuel Line Zip Ties - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they're not made for high-pressure fuel lines obviously they're made for outboards is what they'MoreAnd they're not made for high-pressure fuel lines obviously they're made for outboards is what they're primarily used on the older outboards.
How does a fuel line quick connect work?
2:0912:37How to Disconnect Common Quick Connect Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's how this is a quick-connect. So when you push the line at that side at an angle. It willMoreSo that's how this is a quick-connect. So when you push the line at that side at an angle. It will push that yellow piece out of the way and as soon as the line gets past it it'll back into place.
Can I use hydraulic hose for diesel fuel line?
Hose for fuel service is of different composition, to prevent deterioration resulting in softening, or hardening\cracking, etc. While Diesel fuel is a light oil, the additives in it would deteriorate the hydraulic-service rubber hose. Please include your vehicle details in your signature line.
Can you use hose clamps on fuel lines?
as long as you use high pressure (75+ psi in a turbo fuel rail under load) fuel injection clamps and NOT worm gear clamps, it is safe.
Can I use a zip tie as a hose clamp?
0:050:57Hose Clamp Zip Ties - a Zip Tie designed for hoses and fuel linesYouTubeStart of suggested clipEnd of suggested clipThis is a standard zip tie but it's designed for clamping hoses fuel lines and kind of any circularMoreThis is a standard zip tie but it's designed for clamping hoses fuel lines and kind of any circular object at first glance it may look like a standard zip tie. But.
How do I install quick connect fuel fittings?
1:352:24Installing Quick Connects Into OE Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. SoMoreWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. So all you need to do is just push it right in and you're all good to go.
How do you hook up fuel line fittings?
0:384:21How to Disconnect Common Fuel Line Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull it off in order to reinstall a push type connector just push it on until you hear it clickMoreAnd pull it off in order to reinstall a push type connector just push it on until you hear it click in order to install the push and lock stock connector push it under your fitting.
How do you fix a leaking fuel line connector?
0:0410:40How To Fix Leaking Fuel Lines | ALL Makes And Models - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have four compression fittings we have a tubing cutter. We have a pick or you can use aMoreWe have four compression fittings we have a tubing cutter. We have a pick or you can use a screwdriver whatever the case we're gonna be using a little hacksaw for metal.
Is vinyl tubing OK for diesel fuel?
Use only fuel rated hose for everything between the tank and the IP. Tygon hose is fine for return lines, and you could even get away with vinyl hose for the returns just temporarily for testing purposes.
Can you use hydraulic fittings for diesel?
Not that you can't run diesel to it but the gauges occasionalyl leak and diesel makes a smelly mess to clean up under the dash. Hydraulic hose will be fine and the size should not matter as long as it isn't just way over sized. Tap off the CP3 with a banjo bolt and read it there to watch for filter plugging.
What are diesel fuel lines made of?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel.
What is OC diesel?
The OC DIESEL Organization offers Diesel Fuel Line Fittings and accessories as wells as diagnostics, repair, maintenance and service to all light duty pick-up trucks including the Power Wagon 6.7L Dodge Cummins Diesel and 5.9L Dodge Cummins Diesel.
What is Duramax 6.6L?
The 6.6L GM Duramax Diesel including the LB7, LLY, LBZ, LMM, and LML includes a major portion of aftermarket consumers that identify with the purchasing of diesel performance parts. The OC DIESEL Organization offers inclusive diagnostics, repair, maintenance and service to the full GM Duramax line of diesel motors.
Is there a job too big for OC diesel?
A committed service and repair department work together as a unified team at the OC DIESEL Organization and is capable of handling and maintaining the most difficult of diesel challenges. There is no job too big or too small. Come one, come all, any job, any time at OC DIESEL. It makes no difference whether the job is a diesel performance part installation, challenging diagnostic, a general service, scheduled maintenance, repair, or original equipment manufacturer installation, it will be done correctly. OC DIESEL professionals pride themselves in offering a superior quality service at a fair price.
Where to mount manifolds on hose line?
Mount these manifolds on the end of a hose line to distribute air, water, or hydraulic fluid to three locations from a single supply source.
What is a barbed end fitting made of?
Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.
What is a monel fitting?
These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.
What is the name of the manifold that distributes air to multiple locations?
Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.
Do you need a sealant for threaded fittings?
Tighten these threaded fittings with your hands for a secure connection in testing, flushing, venting, and plugging applications— no tools, tape, or sealant required.
What type of hoses do Darwen Diesels use?
At Darwen Diesels we stock high quality cotton over braided as well as smooth fuel hoses suitable for unleaded petrol and diesel fuels. We also stock a very wide range of high-pressure steel pipe and emergency pipe (both 1.2m and 0.3m lengths). We also have a comprehensive range of multi fuel supply hoses which are available in varying diameters, nylon pipe, clear braid supply hose, and every type of leak off hose.
What is a Darwen diesel?
Darwen Diesels supply a range of fuel supply pipes and fittings. Symptoms of a problem with these parts are long cranking times when starting the engine, especially in cold weather, due to diesel draining back into the tank.
What to check before assuming pump, fuel filter or tank?
A competent mechanic, before immediately assuming it is the pump, fuel filter or tank, would check the condition of the pipes as a damaged or leaky pipe can not only affect the starting and running of the engine but also be a potential fire risk.
Can we source diesel parts?
We can source virtually any diesel part!
Dorman Electrical Wire Connector 800-130
Notes: Fuel line spring lock coupling. Male. 11 mm connector body. 6.25 mm hose x 9.5 mm push connect. PRICE: 10.99
Motorcraft Electrical Wire Connector WPT-1202
Notes: Supply line pressure sensor. 3 Leads. Terminal: Silver. Gauge: 16 PRICE: 38.99