What is the conversion of density to units?
Density - Conversion. Density, or the volumetric mass density, of a substance is its mass per unit volume. Its symbol is ρ (the lower case Greek letter rho). In some cases, density is defined as its weight per unit volume, such as the United States oil and gas industry - that quantity is more specifically called specific weight.
What is the volume correction factor for fuel oil density?
In the Density vs temperature figure(°C), you se that the light blue line represent this fuel oil. Then, use the light blue line in the Fuel oils volume correction figure (Density@Observed T/Density@15°C). At 200°C the correction factor is 0.859.
How do you convert fuel oil density to gravity?
If you have the fuel oil density given in °API, use the API-to-gravity converter. See also similar correlations for lubricating oil, crude oiland jet fuel.
What is the density of 1000 m3 of fuel oil at 15 degrees?
You have 1000 m3 of a fuel oil with a density of 960 kg/m3at 15°C. How will the volume change if you heat it to 100°C? In the Density vs temperature figure (°C), you see that the light green line represent this fuel oil.
How do you calculate the density of fuel oil?
The formula for density is d = M/V, where d is density, M is mass, and V is volume.
How do you convert API to density?
The formula can be reversed to find the density of the petroleum liquid. Add 131.5 to the API gravity. The formula for API gravity is API = (141.5/SG) -131.5 where SG is the specific gravity of the petroleum liquid being measured. For example, for an API gravity of 50, add 131.5 to obtain 181.5.
How is diesel density calculated?
For example, if you poured 16 ml of fluid in the cylinder, you will use 16 ml. If the total weight of the fluid is 16 grams, the calculation would be 16 g / 16 ml. This would give you a density of 1 g/ml.
How do you convert density to kilograms?
The SI standard is really kg / m3. 1 kg/dm3 = 1 kg/L = 1000 g/1000 cm3 = 1 g/cm3 = 1 g/ml (water). Water as the reference with its highest density at 3.98 °C is ρ = 1 g/cm3. The correct SI unit is ρ = 1000 kg/m3.
What is the density of crude oil?
Crude oil has historically been referred to as conventional crude, which is generally found deep underground by drilling. This crude typically has a density range of around 800 kg/m3 to 900 kg/m3 (80 per cent to 90 per cent that of water).
What is API gravity formula?
API gravity is gradated in degrees on a hydrometer instrument and was designed so that most values would fall between 10° and 70° API gravity. The arbitrary formula used to obtain this effect is: API gravity = (141.5/SG at 60 degF) – 131.5, where SG is the specific gravity of the fluid.
What is density in petrol pump?
For petrol its 710-770 kg/cubic mtr. For diesel its 820-860 kg/cubic mtr....But the criteria is that the petrol/diesel should be kept for 46 Minutes at temp.
What is the energy density of petrol?
46 MJ/kgTable 1: The energy density(MJ/kg) of a variety of different fuels....Fuel energy density.FuelEnergy densityCrude oil44 MJ/kgDiesel45 MJ/kgGasoline46 MJ/kgNatural gas55 MJ/kg4 more rows•Dec 20, 2021
Which is denser petrol or diesel?
Diesel and petrol engines The calorific value of diesel fuel is roughly 45.5 MJ/kg (megajoules per kilogram), slightly lower than petrol which is 45.8 MJ/kg. However, diesel fuel is denser than petrol and contains about 15% more energy by volume (roughly 36.9 MJ/litre compared to 33.7 MJ/litre).
How do I calculate density?
The density equation is density equals mass per unit volume or D = M / V. The key to solving for density is to report the proper mass and volume units. If you are asked to give density in different units from the mass and volume, you will need to convert them.
How do you convert m3 to kg?
1 cubic meter is equal to 1000 kilo gram.
What is density kg m3?
The kilogram per cubic metre (symbol: kg·m−3, or kg/m3) is the coherent SI derived unit of density, defined by mass in kilograms divided by volume in cubic metres. Kilogram per cubic metre. Density of the cube: 1 kg/m3.
Is API gravity the same as density?
API gravity is a commonly used index of the density of a crude oil or refined products. API stands for the American Petroleum Institute, which is the industry organization that created this measure. A crude oil will typically have an API between 15 and 45 degrees. Higher API indicates a lighter (lower density) crude.
What is the relationship between density specific gravity and API?
API gravity is another expression of this measurement that uses the Density/Specific gravity for its conversion. The higher the api the less dense the sample is. For example at 60°F: an api of 10.0 is equal to 1.0000 g/cm3. While an api of 80.0 is equal to 0.6684 g/cm3.
What is the difference between API gravity and density?
API gravity is thus an inverse measure of a petroleum liquid's density relative to that of water (also known as specific gravity). It is used to compare densities of petroleum liquids. For example, if one petroleum liquid is less dense than another, it has a greater API gravity.
What is the density of oil if its API gravity is equivalent to 40?
API Gravity to Specific Gravity and Density Chart:Degree API.Specific Gravity.Density (kg/m3).400,825825,073410,820820,290420,816815,562430,811810,88840 more rows
CONVERSION TABLE
Refer to the Bharat Petroleum Conversion Table for references to products and their conversion factors.
CONNECT WITH US
2021 © Bharat Petroleum Corporation Limited All Rights Reserved. Updated on Feb 16 2022 10:44AM