Do you make custom lines for gas or diesel applications?
We custom make lines for any application Gas or Diesel. Here are a few samples of what we can do for you. We also have prototyping and bulk run capabilities. Give us a call for prototyping 800-669-1593.
What are the different sizes of fuel lines?
Available in diameters 1/4”, 5/16”, 3/8”, 1/2”, and 5/8” with a.035” wall thickness. For the Do it Yourselfer to make your own Fuel or Transmission lines. Made in the USA.
Can I order custom braided stainless steel custom lines?
Braided stainless steel custom lines can be ordered in your choice of lengths, end fitting types and your choice of clocking for your fittings. You can also select any of five different colors for your PVC protective line covering or opt for no covering.
Where does the fuel pipe run?
Typical Fuel related tubing routes from the fuel tank to the fuel pump or fuel rail. The return line from fuel sending unit to fuel pump or fuel sending unit to vapor canister.
What is the best material for fuel lines?
polytetrafluoroethyleneThe best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.Jun 27, 2017
How do you build a fuel line?
0:104:17Assemble braided PTFE AN fuel lines by Hot Rod fuel hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing you need to do is determine the length of the hose you're going to need and thenMoreSo the first thing you need to do is determine the length of the hose you're going to need and then you're going to want to put masking tape where you're going to be cutting. It.
Can you use rubber hose for fuel line?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.Dec 5, 2014
Can you use brake lines for fuel?
Use it steel, 3/8 line is 3/8 line, brake line is probably just higher quality (cost you more) because it has to take MUCH higher pressure, but it will work fine for gas line, make sure as others said that the rubber hose you use IS GAS hose.Jul 25, 2009
Where can I run fuel lines?
The OEM fuel lines run on the inside of the passenger side frame rail, very close to the header. Obviously, that tends to bake the fuel. To avoid that, we routed the feed and return lines over the top of the passenger side inner fender and down along the outer side of the rail and subframe connector.Aug 14, 2020
How do I make my own line?
0:024:04How to Make AN Lines and Custom Power Steering Lines - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst cut your hose the length a clean cut is critical in working with braided lines to avoid strainMoreFirst cut your hose the length a clean cut is critical in working with braided lines to avoid strain a cable cutter works best but if you're in a pinch you can wrap the line with electrical tape.
What type of tubing is used for gasoline?
It has exceptional resistance to most gasoline, oils, kerosene, and other petroleum-based chemicals, making PU tubing and hose an ideal choice for fuel lines (although additives in today's gasoline and petroleum products warrant field testing).Jun 16, 2008
Can you use fuel injection hose for fuel line?
Fuel injection hose is more advisable to use on fuel injection systems. If you're using a fuel injection hose for the fuel line, make sure it has an SAE rating so it won't dissolve on fuel.
What is clear fuel line made of?
Premium Transparent Fuel line is made from 85-duometer polyurethane, providing superior resistance to abrasions, kinking, tearing, oxidation and chemical damage. This fuel line will not harden, and stays flexible.Dec 31, 2020
How do you bend a gas line without kinking?
0:162:37How to Easily Bend a Brake or Fuel Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirmly hold the line as close as possible to the die otherwise. You can risk deforming the straightMoreFirmly hold the line as close as possible to the die otherwise. You can risk deforming the straight runs.
Can copper line be used for gasoline?
Copper tubing makes an attractive and permanent oil or fuel line and connections. Here are a few hints that might be helpful in working with copper tubing. To begin with, new copper tubing is much easier to work with than old tubing. This is because it is softer.
What size fuel line do I need?
Fuel pumps are sized to feed your system with enough fuel to optimize engine performance....Recommended Size, Based on Horsepower.Recommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•Sep 16, 2017
2. Fuel Tank Installation Co Inc
From Business: FTI has been in business for over 40+ years, and during that time weve built a solid reputation for expedient and reliable service. You can count on us to get…
3. Ace Tank & Fueling Equip Co
Didn't find what you were looking for? Please help others by helping us do better.
New Hoses
If you need new hoses, you've come to the right place. Rely on Hose Makers Plus for power steering hoses, brake hoses, fuel lines, propane hoses, and so much more.
Hose Repairs
Replacing your damaged hose isn't always the best solution. If the hose can be repaired, we will always recommend that option first. We work on all types of hoses for all types of vehicles.
Hoses for All Vehicles
If your vehicle or equipment uses hydraulics, we have the hoses and lines you need. We work with cars, heavy-duty trucks, farming equipment, AG, boats, and more.
StopFlex Hoses
StopFlex D.O.T. Stainless Steel Braided Brake hose kits. Eliminate the spongy feel of OEM rubber hoses with our D.O.T. compliant Stainless Braided Hose that virtually eliminates volumetric expansion for a firmer pedal feel and more immediate response. Domestic and import applications from 1960’s to present.
Coil Tubing
Coil tubing available in Bright Annealed Stainless Steel, OEM Tinned Bundy Steel and 3003-0 Aluminum in many diameters from 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8”. Most are .028” or .035” wall thickness. For the Do it Yourselfer to make your own Brake, Fuel or Transmission lines. Made in the USA.
Tubing Benders
Tube bending hand tools for tubing sizes 3/16”, 1/4”, 5/16”, 3/8” and 1/2”. Two styles with or without swivel handle to complete up to 180 degree bends.