How much does a fuel line fitting cost?
Through Summit Racing, a 20-foot length of 3/8-inch (-6 AN) Ultra-Pro hose runs over $180 and a 90-degree fitting is around $25. This technology isn’t cheap, but it appears that, short of physical damage, this fuel line and the fittings will last the life of your vehicle.
Why buy performance fuel injection lines and fittings?
Purchasing performance fuel injection lines and fittings as well as hose for your car, truck, or SUV provides a lot of benefits. These include a safe and secure connection to provide years of leak-free service for your vehicle. On the track, racing lines help protect the driver in the event of an accident by being made stronger.
What are the different fittings on top of a fuel cell?
On top of a fuel cell are fittings that are available for many different applications. In every case, one of the fittings must act as a vent to relieve pressure as fuel exits the fuel cell. The vent can also be combined with the roll-over valve, which prevents fuel from leaking out of the fuel cell, should the vehicle end up inverted.
How to remove a fuel line adapter fittings?
Aluminum wrenches are used to separate the fitting as it is two pieces. The inner part of the fitting will be released by a pull and twist motion. The outer part of the fitting comes off of the hose with the same type of method. JEGS offers a wide variety of fuel line adapter fittings Q. How To Replace A Fuel Line Connector
Who makes custom fuel lines?
Scheid DieselCustom Bent Fuel LinesManufacturerScheid DieselWeight10.00 lbsMPN.093x.250BBrandScheid DieselGoogle Product CategoryVehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts6 more rows
How do you make a fuel line fitting?
1:063:03How to make/assemble braided hose with AN fittings MADE EASY!YouTubeStart of suggested clipEnd of suggested clipIt's two pieces. Like. So and on the inside of here. You can see it's threaded just on the insideMoreIt's two pieces. Like. So and on the inside of here. You can see it's threaded just on the inside there so what we're going to do. We're going to take it.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
What is the best metal for fuel line?
Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.
Why are an fittings red and blue?
It is a US military-derived specification that dates back to World War II and stems from a joint standard agreed upon by the Army and Navy, hence AN. The Army-Navy involvement is also the origin of the red/blue color combination that was traditionally used in the anodized finishing process.
How do I choose an fitting?
Selecting Your FittingsConsider the Tubing Used. Barbed fittings work best with flexible tubing such as silicone or PharMed®. ... Determine Material Compatibility. Fluids that are incompatible with fitting material may cause leakage or system damage. ... Check Temperature and Pressure Conditions.
Is braided fuel line better?
Braided Lines Braided hose provides better heat dissipation and better flow, which is important when choosing performance car parts. Additionally, braided lines are able to withstand more pressure than rubber lines.Rubber vs Braided Hose: What's the Best Choice for your Vehicle?https://www.roadrunnerperformance.com › rubber-vs-brai...https://www.roadrunnerperformance.com › rubber-vs-brai...
What is the best type of fuel line?
The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.Building Safer Fuel Lines For Your Muscle Car Or Hot Rod - MotorTrendhttps://www.motortrend.com › how-to › 1706-building-sa...https://www.motortrend.com › how-to › 1706-building-sa...
Are braided fuel lines safe?
Modern fuels have additives that harden and deteriorate traditional rubber hose including stainless steel-braided hose. This leads to potentially dangerous leaks and weeping.How To Choose Fuel Hose - Earl's Plumbing - Holley Motor Lifehttps://www.holley.com › blog › post › how_to_choose_f...https://www.holley.com › blog › post › how_to_choose_f...
What is PTFE in a teflon?
The PTFE (polytetrafluoroethylene) is a Teflon®-like material impregnated with carbon that makes the inner liner a darker color, as opposed to the generic white PTFE. The addition of the carbon makes the material conductive so that there’s no chance of a static electricity discharge that can occur with non-carbon infused PTFE.
Who is Jeff on OnAllCylinders?
Now he serves as a regular contributor to OnAllCylinders.
Is PTFE hose convoluted?
Other companies that make the PTFE hose include TechAFX, which is also a carbon-impregnated PTFE hose but this is not convoluted. Because of the stiffer nature of PTFE, this non- convoluted line requires a larger bend radius than the convoluted material. Like the UltraPro, this SS braided hose also requires specific fittings ...
What to check before assuming pump, fuel filter or tank?
A competent mechanic, before immediately assuming it is the pump, fuel filter or tank, would check the condition of the pipes as a damaged or leaky pipe can not only affect the starting and running of the engine but also be a potential fire risk.
What is a Darwen diesel?
Darwen Diesels supply a range of fuel supply pipes and fittings. Symptoms of a problem with these parts are long cranking times when starting the engine, especially in cold weather, due to diesel draining back into the tank.
Can you use coat hanger wire for tubing?
Allow yourself enough length, which includes bends, before cutting. You can use coat hanger wire as a template between connections (much as exhaust shops do) to prevent wasting expensive tubing. 7. Tube bending begins with lining up the reference mark at zero and bending from that mark.
Can you send brake lines to Classic Tube?
If you don't have the old lines, you can send Classic Tube your specifications, and the company will bend and form lines to your blueprint.
Do you need to use brake fluid when flaring fuel lines?
When you are flaring brake and fuel lines, it is suggested you use a lubricant at the flaring head and line end. This makes the going smoother when you are flaring the tip. For brake lines, use brake fluid as a lubricant.
We are the one-stop resource for custom brass fittings
Since 1981, we have served your industry by supplying and manufacturing brass fittings.
Browse Our Catalog
Before you decide on ordering custom-made fittings, we recommend that you take a look at our catalog of products first. With the amount of experience we have and the wide selection of fittings we offer, we may already have the parts that you need. Our dedicated staff is more than willing to help you find exactly what you’re looking for.