| Effective Date: | June 15th 2022 |
| Current Price Index | $762.00 |
| Pricing Based On | $502.50 |
| Differential For Indexing: | $ 259.50 |
| Surcharge Per Ton | $ 12.98 |
How do you calculate the price of asphalt?
Why Does Asphalt Crack?
- The Sun. The sun is one of asphalt’s worst enemies. ...
- Moisture. Moisture beneath the surface of the asphalt causes the gravel base to shift. ...
- Ground Movement. In addition to the ground movement caused by moisture, temperature changes also create movement. ...
How much for a ton of asphalt?
How Much Does Asphalt Cost Per Ton? The asphalt is sold in a bulk system. The minimum amount is one ton. The cost of asphalt per ton is on average, around 70 to 80 dollars in the current market. The amount depends on the manufacturing cost. So, it may vary from time to time and place to place.
What is the average cost for hot asphalt per ton?
What Is The Average Cost For Hot Asphalt Per Ton? Hot mix asphalt costs $100 to $200 per ton. This is the standard type for all-weather surfacing and repairs. Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. How many tons of asphalt are in a dump truck? How much can you deliver in one truck
Is asphalt cheaper than concrete?
There are a few reasons asphalt is cheaper than concrete. One is due to the costs of the materials required to make asphalt. Also, asphalt is easier and quicker to install. Concrete also has many finishing options that can make it much more expensive. Asphalt is commonly referred to as blacktop or pavement.
How many tons of asphalt are in a truck load?
Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
How much is a load of hot asphalt?
Example Driveway Project Estimate The square footage in this example is 20′ times 40′, which equals 800 square foot. Next, divide this into how much asphalt we need per square foot. 800 divided by 26.66 equals 30 tonnes of asphalt. At $85 per ton for hot-mix asphalt, the asphalt will cost 30 times $85, or $2,550.
How is asphalt sold?
Asphalt is usually sold by the tonne from companies specializing in construction, usually road construction and roof water-proofing. Our hot mix asphalt calculator will help you estimate how much of it you need, approximately.
How do you calculate asphalt cost?
Asphalt is usually priced by square foot. The cost per ton is $40 to $80 and per square foot is $0.75 to $2.00. The cost is determined by the size of rock in the asphalt, volume ordered, delivery cost, and the location of the work being performed.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
What does 1 ton of asphalt weigh?
According to Asphalt Institute, 2,000 pounds equals 1 ton. Continuing the example, the pound value will be divided by 2,000 to determine the amount in tons: 5,920 pounds of asphalt mix/2,000 = 2.96 tons.
How do you quote an asphalt driveway?
Amount of asphalt: consider the length, depth, and width of your driveway. Then ask your contractor to check and provide you a quote. Transportation costs: the farther your house is located, the more you are likely to pay more costs. This will also affect the type of asphalt you will use such as warm or hot mixes.
How many yards of asphalt do I need for a truck?
The amount of asphalt a truck can carry is based more on truck weight ratings and local jurisdictions more than actual volumetric capacity of the truck bed. For example, a quadruple axle truck will commonly be rated to haul approximately 17-19 Tons (8.5-9.5 Cubic Yards).
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Can you asphalt over concrete?
Well, the answer is yes! It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
Cost Estimator by Driveway Size
The size of your driveway is the biggest factor in determining the cost of your asphalt driveway. Expect to be charged at least $3,258 for an average-sized driveway at an average price. Sometimes the costs of labor will be added, sometimes they are included. Here we’ll break down the costs by square foot, ton, and labor hours.
Other Factors Affecting Cost
Your final bill for your asphalt driveway is going to depend on a lot of factors, including the depth of your asphalt layer, any decorative (stamped asphalt) or extraordinary (heated driveway) features, and the cost of substrate.
Services Often Bundled With Asphalt Driveways
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
Costs of a DIY Asphalt Driveway
You may be tempted to install your own asphalt driveway. Resist the temptation. This is going to be an enormous project. But if you think you’d like to DIY your asphalt driveway, we’ll outline the pros and cons as well as costs and materials required.
Conclusion
An asphalt driveway will cost you anywhere from $3,086 to $7,912, with an average cost of $4,996. Note that the price of any add-on services will increase your final bill.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.