Cost to Replace Concrete Driveway Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000.
How much does it cost to repair a cement driveway?
The cost to Repair Concrete starts at $9.75 - $11.54 per square foot, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to repair concrete, along with per unit costs and material requirements. See professionally prepared estimates for concrete repair work.
How much does it cost to demolish a concrete driveway?
The national average cost to demolish a concrete driveway is between $500 and $2,500, including debris disposal and returning the site to grade. Concrete driveway removal costs $1-$3 per square foot on average, but your exact project cost could be more or less than this. How much does it cost to break up a concrete driveway?
How much does it cost to repave a driveway?
Repaving an asphalt driveway costs $7,000 on average, with a typical range of $4,000 to $10,000.This includes the cost to demolish and remove the old driveway ($1,000 to $3,000) and pave a new driveway ($3,000 to $7,000).
Should you resurface or replace your concrete driveway?
Should You Resurface or Replace Your Concrete Driveway? Get a Fast Free Quote - or call us today (636) 256-6733. A+ BBB Accredited. Chamber of Commerce. Video Testimonials. view more.
Is a new concrete driveway worth it?
In almost every case, it's worth the investment. A new driveway can increase your home's value while improving the aesthetics of your house and your neighborhood. Learn more about the benefits of a concrete driveway and how it enhances your home's curb appeal.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
What is the life expectancy of a concrete driveway?
25 to 30 yearsThe average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How much does it cost to pour a 20x30 slab?
The average cost of a 20×30 concrete slab is between $2,400 and $4,800. The median price is about $3,600. However, the thickness of the slab and other features may increase or lower the cost.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
What's cheaper concrete or asphalt?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
Is it better to have a concrete or asphalt driveway?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
Is replacing a driveway a good investment?
You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.
How do you redo a driveway?
4:436:54How to Resurface a Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd less messy. My first application tool will be a four inch wide paint brush. With this I'll applyMoreAnd less messy. My first application tool will be a four inch wide paint brush. With this I'll apply the material around the edge of the driveway. Being careful to keep it off the cobblestone. Border.
Do you need gravel under concrete driveway?
You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
How much does it cost to repair a pitted concrete driveway?
If the driveway wasn’t finished correctly or the concrete mix wasn’t properly prepared, pitting may also occur. Patches could be used to fix pitted concrete at a cost of $1.75 to $2.00 per square foot. Repairing a 100 square foot section of a pitted driveway will cost between $175 and $200.
Why replace a concrete driveway?
Replacing a concrete driveway is a consideration if extensive structural damage has occurred. Large cracks and sunken slabs are two potential reasons that a homeowner chooses to replace instead of repair the driveway. A repaving company is hired for the job of replacing the driveway.
How to tell if a concrete driveway is pitted?
Pitted concrete occurs as a result of small, deep holes in the driveway. A sign of a pitted driveway is jagged lines in a compressed area. Pitting occurs naturally over time and is seen in driveways that are several decades old. If the driveway wasn’t finished correctly or the concrete mix wasn’t properly prepared, pitting may also occur. Patches could be used to fix pitted concrete at a cost of $1.75 to $2.00 per square foot. Repairing a 100 square foot section of a pitted driveway will cost between $175 and $200.
What is concrete driveway repair?
Repairing a concrete driveway is more than just a cosmetic improvement. Concrete driveway repairs may be done to fix underlying issues such as sunken slabs and hairline cracks. To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues.
Why does my driveway crack?
Concrete can crack or sink due to severe weather changes, poor installation, and increased exposure to moisture. Professionals evaluate the severity of the problem to recommend the best solutions.
How much does it cost to build a driveway apron?
With an average measurement of 10 to 15 square feet, the project cost is $110 to $140 for 10 to 15 square feet including labor and materials.
How much does it cost to patch a hairline crack?
The contractor may have the option to use a compound patch to address hairline cracks. Expect to pay around $1.75 to $2.00 per square foot for patches on a concrete driveway.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.