How is asphalt cheaper than concrete in coating your driveway?
- Even though concrete lasts somewhat longer, asphalt costs considerably less and gives more value for your money.
- Concrete will eventually crack, even in warmer climates. ...
- Asphalt can be tinted and made to look very pleasing, similar to concrete.
- Asphalt does not show stains as bad as concrete.
How much does it cost to remove an asphalt driveway?
The average cost to remove an asphalt driveway is $1 to $3 per square foot, depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.
Should I repair or replace my asphalt driveway?
Typically you’ll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.
How much does it cost to put in a new driveway?
Dec 31, 2020 Paving an asphalt driveway costs about $3-$5 per square foot . For a standard 10-foot by 20-foot driveway, big enough for a single car, that means you'll spend between $600-$1,000 .
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.