How much does it cost to remove a concrete driveway?
The cost to remove concrete averages around $4 a square foot. However, thin sections lifted by a skid are as low as $2 a square foot, and large, thick sections with rebar or that require robotic cutting and removal or cutting and removal by hand go as high as $6 a square foot.
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How much does it cost to haul away concrete?
In the name of safety, you might also want to have underground lines marked by utility companies. Concrete removal costs $2 to $6 per square foot (including demolition, loading, hauling, and disposal) but could cost more depending on the difficulty and scope of the job as well as the local market.
How much does it cost to remove concrete steps?
How Much Does It Cost To Replace Or Install Concrete Steps?
- On This Page:
- Average Cost to Install Concrete Steps
- Prefab Concrete Steps Pricing. A precast set of stairs between 3 and 15 steps costs between $300 and $2,000 to purchase. ...
- Cost to Pour a Concrete Staircase. ...
- Average Price to Install with Prefabricated Cement vs. ...
- Cost to Replace Concrete Steps. ...
- Concrete Steps Cost Calculator by Use. ...
- DIY Building vs. ...
How much does it cost to remove existing concrete?
Most homeowners pay between $679 and $2,848 for concrete removal, with an average cost of $1,444. The national average cost of concrete removal is $1,444, with a typical range between $679 and $2,848 or between $2 and $6 per square foot.
How much does it cost to remove concrete UK?
On average, concrete removal costs around £50 per metre squared plus VAT. This means that the cost of concrete removal per square foot is around £4.50 plus VAT.
How do you tear up a concrete driveway?
Jackhammer – a vertical handheld tool that breaks up your driveway. Electric chipping hammer – a mechanical hammer that chips away stubborn, sticky pieces of asphalt. Circular Saw – a mechanical saw that cuts asphalt into pieces. For this type of project, it's much easier to use than a manual saw.
How much does it cost to jackhammer concrete?
The cost to remove a concrete slab depends on several factors. These include the area of the space, the thickness of the concrete, the working conditions, and whether the concrete is reinforced or non-reinforced. On average the cost of demolition is around $2 – $6 per square foot for smaller projects.
How much does it cost to dig a driveway UK?
On average, you can expect the cost for this type of job to start at £50 per square metre, but total costs tend to sit between £1,500-£2,500. Of course, this price can increase if the driveway is larger than average or requires specialist equipment for removal.
How much does a concrete driveway cost UK?
The size of a typical driveway in the UK ranges from about 5.5m2 for a 1 car space up to 21m2 for a good–sized 2 car space. The average cost of a laying a concrete driveway lies somewhere around £50/m2 with labour costing between £200 and £450 per day depending on the complexity of the work.
Can I remove concrete myself?
Tearing up concrete yourself can also save you a ton of money. Hiring a contractor just to demolish a 12 x 14-ft. patio could cost you $1,400 or more. If you do it yourself, the cost to remove a concrete driveway will run you about $400, including rental and disposal.
How long does it take to tear up a driveway?
Generally speaking, it takes anywhere from 3-7 days to fully demolish an old driveway and pave a new one. After new asphalt has been paved, you can expect about 5 days of initial curing before you can park your vehicle on the driveway again.
How do you get rid of a driveway?
Asphalt driveway removal can be accomplished using a jackhammer to break up the asphalt or even a circular saw to cut the driveway into small pieces. The best way to remove asphalt, however, is with a larger piece of equipment, such as a Caterpillar 303 excavator from a rental center.
How do you calculate concrete demolition?
Square Footage The size of concrete you need cleared is a good starting point to estimate costs for concrete demolition. $2 to $6 per square foot is standard, which includes labor and dumping fees. Laying new concrete over the old space is not included in this price range.
How do you break concrete without a jackhammer?
InstructionsDig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax or mattock. ... Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust. ... Pry Off Stubborn Pieces. ... Move the Concrete Chunks With a Hand Truck.
How do you remove old concrete?
Steps for Removing a Concrete SlabStep 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you're working on. ... Step 2: It's Hammer Time. ... Step 3: Pull Apart and Remove the Broken Concrete. ... Step 4: Repeat Steps Until Concrete Is Demolished.
What is the easiest way to break up concrete?
Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less. Dig at the base of the slab to find the bottom....Tool #1: Sledgehammer + Pry BarRecruit a buddy to lift a corner with a pry bar. ... Pry and pull out the broken chunks as they break apart.Don't hit the same spot twice.
How do I get rid of concrete in my garden?
The easiest way to find out is to grab a spade and dig to the base of the slab. If the distance from bottom to top is around three inches or less, you can use a metal sledgehammer to break up concrete.
How do you remove a concrete slab?
Steps for Removing a Concrete SlabStep 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you're working on. ... Step 2: It's Hammer Time. ... Step 3: Pull Apart and Remove the Broken Concrete. ... Step 4: Repeat Steps Until Concrete Is Demolished.
What will break down concrete?
Concrete is a durable building material that takes special materials to dissolve once it's hardened into place. Phosphoric acid and trisodium phosphate are the main compounds used to dissolve concrete leftover from masonry work.
How much does it cost to remove a concrete driveway?
Concrete driveways are very common. They range in size and thickness, so they have a wide range of average removal costs, but most fall between $1,500 and $2,500.
How much does it cost to remove unreinforced concrete?
It is much easier to break into pieces, so it may be cut and removed quickly, even by hand if necessary. It costs between $2 and $4 a square foot to remove, depending on thickness and location.
What factors impact the cost of concrete removal?
Many factors ultimately impact the cost of your concrete removal. This includes whether machinery is used or if the concrete needs to be broken and removed by hand. The concrete thickness and size also have an impact. The thicker the concrete, the harder it is to remove.
What are the two types of concrete?
There are two basic types of concrete: unreinforced, which is just a concrete slab, and reinforced, which has rebar embedded in it. Both have a range of removal costs, depending on the location and size of the area, thickness, and how difficult it is to get machinery into the area: Concrete Type.
How much does it cost to cut rebar?
This requires cutting through both the concrete and the rebar and costs between $4 - $6 a square foot.
How much does it cost to break up concrete stairs?
They are generally not too high or steep but crumble over time. They are easy to break up because they are not reinforced. They cost between $250 and $400 to break up and remove on average.
How much does it cost to remove a sidewalk?
These are usually paved in sections, which are easily lifted and removed individually. The average sidewalk removal cost is $1,200 - $2,200.
How do you remove concrete from a driveway?
First, the area will be prepared, cleared of debris and inspected in case of pipes or power lines below. Once ready, the driveway will be broken up into large chunks which will be dumped into either your skip or the removal truck used by the team.
How many inches should a driveway be?
However, some driveways may be five inches or more, particularly those designed to be driven on by heavy vehicles. Disposal of heavy materials is highly labour intensive; it requires a team of tradespeople and a strategy for waste removal.
Can you save money by removing concrete?
If you have experience working with concrete and have access to the set of tools required for a job of this stature, you can save money on labour costs by attempting the removal yourself . However, a botched removal will likely lead to high costs down the line if you require a tradesperson to finish the removal.
Can concrete driveways be damaged?
By their very nature, driveways are designed to get a lot of use. However, over time, concrete driveways are susceptible to damage that can quickly become a safety hazard. If your concrete driveway has seen better days, and you are looking to give your property a little bit more kerb appeal, read on. The following guide gives an overview of the average cost to remove a concrete driveway.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does a concrete driveway cost?
A plain gray concrete driveway costs $4 to $8 per square foot. Adding a stain, basic border, and broom-finish texture increases the price to $8 to $12 per square foot. A stamped concrete driveway with multiple patterns, colors, decorative borders, and sealing costs $12 to $18 per square foot.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How thick should a driveway be for a car?
A residential concrete driveway should be 4 inches thick to hold standard passenger cars. For heavier vehicles or RVs, a thickness of 5 to 6 inches is recommended, which increases the load-bearing capacity by 50%.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to remove concrete?
The cost to remove concrete typically costs $1,037 or between $536 and $1,553, at a rate of $2 to $6 per square foot. What you’ll pay depends on a variety of factors, including the type and amount you need taken out, as well as the complexity of your project. Local labor and material costs, as well as disposal, also impact the final price.
How much does it cost to remove a reinforced wall?
Homeowners generally pay between $2 and $6 per square foot for this type of work. Expect to pay more if the material’s reinforced with wire mesh or steel bars. This usually requires heavy machinery for removal. It’s easier to take out unreinforced material, and a lower price point reflects that.
How much does it cost to cut a 4 inch slab?
Pros usually charge between $4.75 and $7.50 per linear foot to cut a typical 4 inch slab. The final price can change depending on the complexity of the job, as well as regional labor and material costs.
How much does a dump cost?
Dumps can charge anywhere from $30 to $100 per ton, depending on where you live. Disposal is an important part of the removal process. Talk to your pro about whether or not they include the cost of disposal in their quote.
How much does it cost to build a sidewalk?
Expect to pay between $535 and $1,510 for this project. The final price depends on factors like the sidewalk’s size, location and condition.
How much does a home renovation cost?
Typical prices range from $250 to $3,200 for popular projects. Ultimately, there are several factors that affect your final bill. These include the type, the thickness and surface area of the material, as well as the complexity of the job.
Do you need a permit to demolish a house?
Yes, some areas require a permit for demolition, depending on the size and scope of the project. They might also require an inspection in addition to the permit. Also, it's smart to have utility companies mark where there are underground lines on your property. This prevents harming any of those lines.
How long does it take to remove concrete?
On average, it takes less than one day to remove a concrete patio. Of course, your exact project timeline will depend on a number of factors, just like the ones that affect your project’s cost. (The longer your project takes, generally the more expensive it will be.)
What can dissolve concrete?
Concrete is a durable building material that takes special materials to dissolve once it’s hardened into place. Phosphoric acid and trisodium phosphate are the main compounds used to dissolve concrete leftover from masonry work.
What is the best tool for breaking up concrete?
Tool #1: Sledgehammer + Pry Bar When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.
When should I redo my driveway?
Typically you’ll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.
How do you break concrete by hand?
Dig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax.
How long should concrete set before removing forms?
The forms or “molding” that holds the concrete in place until it dries should be left alone for at least two days to ensure that the concrete is completely dry. If the forms are removed too soon, the concrete can begin to sag, crack and collapse, especially if conditions like temperature affected its strength.
Should you wet down new concrete?
QUESTION: I’ve been told that new concrete should be kept moist for at least three days while curing. ANSWER: Keeping concrete moist helps the curing process. Concrete hardens as a result of a chemical reaction, called hydration, between cement and water, not because it dries.
Per Square Foot Costing
Having a way to measure concrete removal costs makes it convenient to price this service. Most contractors usually charge between $2 and $6 per square foot of concrete removal and demolition.
Per Ton Costing
Per ton costing of concrete removal is mostly associated with post demolition cleanup.
Concrete Stair Removal Costs
Getting deeper into our discussion on demolition costs, we’ll start by looking at costs for concrete stair removal. It will cost you around $250 and $400 to have your concrete stair removed or demolished.
Concrete Slab Removal Costs
When dealing with a concrete slab, you’re likely to attract an average demolition cost of about $600. However, the nature of the job in terms of slab thickness and reinforcements would drive up prices to as much as $3,000.
Cost To Remove Concrete Driveway
If a driveway is involved, the approach to costing is quite different.
Cost To Remove Concrete Sidewalk
When concrete sidewalk demolition is involved, the homeowner may incur a fee of around $535 to $1,510. An assessment of your sidewalk’s condition will determine your exact costs.
Concrete Patio Removal Costs
Whatever the reasons for demolishing your patio are, the cost of removal will be influenced by its thickness.
What is the labor required to remove concrete slab?
Basic labor to remove concrete slab with favorable site conditions. Jackhammer concrete into movable pieces. Remove all concrete and reinforcing material. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup.
How to estimate project cost?
To estimate costs for your project: 1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased. 2. Specify Project Size and Options Enter the number of "square feet" required for the project. 3.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How much does it cost to install asphalt?
The price to install an asphalt driveway is comparable to concrete, at about $7 to $13 per square foot compared to $4 to $15 per square foot for the concrete mix. But asphalt doesn't last as long and requires more maintenance, potentially increasing long term costs.
What is the difference between concrete and asphalt?
The difference between concrete and asphalt comes down to price, look and durability.
How much does it cost to stain a driveway?
Adding staining to the driveway installation increases project prices to $6 to $12 per square foot. It is done while the material is still wet and allows you to add a tint that matches your home in almost any color.
How many hours do you need to work on concrete?
Expect to spend at least 50 hours of total work on the project.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does it cost to remove a driveway?
Existing driveway removal – This normally runs in the neighborhood of . 50 – $1.50 per square foot. This involves the use of heavy equipment, such as: Jack hammers, Bobcats, etc.
How much does a 2 car driveway cost?
x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Can you install concrete driveways?
Installing Concrete driveway isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a landscaping or, mason company to perform the work for you. Landscaping or, mason companies will most always get better prices on Concrete driveway — saving your back and additional costs, so shop around, ask your neighbors if they can recommend someone.