Seal your driveway once a year for maximum durability. Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
Should I resurface, repair, or replace my concrete driveway?
When it comes to fixing a driveway, your two options are generally either resurfacing it or replacing it entirely. However, there is a third option: patching it with a little extra concrete where necessary. If there’s only one hole or a surface-level crack, patching the concrete could be your best bet.
Should you resurface or replace your concrete driveway?
Should You Resurface or Replace Your Concrete Driveway? Get a Fast Free Quote - or call us today (636) 256-6733. A+ BBB Accredited. Chamber of Commerce. Video Testimonials. view more.
How much does it cost to resurface a driveway?
Depending on the type of surface you’re working on, costs can go up or down. If you have a concrete driveway, you can have it resurfaced for around $3 to $5 per square foot. If it’s too damaged or crumbly to resurface, the cost of a new concrete driveway goes for around $2 to $15 per square foot on average.
What are my options for repairing a concrete driveway?
- Many concrete crack fillers, sometimes called masonry crack fillers, are designed for cracks up to 1/4-inch wide. ...
- The use of a concrete backer rod is recommended for cracks wider than 1/4-inch, since these cracks are usually deep. ...
- Before you apply the new filler, break up any old concrete patch materials with a hammer or masonry chisel .
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How do you remove concrete from a driveway?
0:2110:26Complete Concrete Driveway Removal Using a Skid SteerYouTubeStart of suggested clipEnd of suggested clipPossible so that I can pick it up with my Forks. And just load it into other dump trailer or a dumpMorePossible so that I can pick it up with my Forks. And just load it into other dump trailer or a dump truck.
How hard is it to remove a driveway?
Removing your driveway is a daunting task. With hours of work involved and contractor prices in the $3,000 range, it's tempting to put off. But if you use our handy DIY guide, you'll save on driveway demolition costs, prevent future issues and increase your home's value.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
Can I remove concrete myself?
Tearing up concrete yourself can also save you a ton of money. Hiring a contractor just to demolish a 12 x 14-ft. patio could cost you $1,400 or more. If you do it yourself, the cost to remove a concrete driveway will run you about $400, including rental and disposal.
How do you break up and remove a concrete driveway?
Steps for Removing a Concrete SlabStep 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you're working on. ... Step 2: It's Hammer Time. ... Step 3: Pull Apart and Remove the Broken Concrete. ... Step 4: Repeat Steps Until Concrete Is Demolished.
How long does it take to tear up a driveway?
Generally speaking, it takes anywhere from 3-7 days to fully demolish an old driveway and pave a new one. After new asphalt has been paved, you can expect about 5 days of initial curing before you can park your vehicle on the driveway again.
How do you calculate concrete removal?
Most homeowners pay between $679 and $2,848 for concrete removal, with an average cost of $1,444. The national average cost of concrete removal is $1,444, with a typical range between $679 and $2,848 or between $2 and $6 per square foot.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
Is replacing a driveway a good investment?
You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How do you redo a driveway?
4:436:54How to Resurface a Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd less messy. My first application tool will be a four inch wide paint brush. With this I'll applyMoreAnd less messy. My first application tool will be a four inch wide paint brush. With this I'll apply the material around the edge of the driveway. Being careful to keep it off the cobblestone. Border.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does it cost to remove unreinforced concrete?
It is much easier to break into pieces, so it may be cut and removed quickly, even by hand if necessary. It costs between $2 and $4 a square foot to remove, depending on thickness and location.
How much does it cost to remove a slab?
They can be a few inches thick to a full foot thick, so they have a wide range of costs associated with their removal. The average range is $600 - $1,000.
How much does it cost to remove concrete gutters?
They are occasionally found on certain types of houses. They are also easy to break up and remove at an average cost of $350 - $500.
What factors impact the cost of concrete removal?
Many factors ultimately impact the cost of your concrete removal. This includes whether machinery is used or if the concrete needs to be broken and removed by hand. The concrete thickness and size also have an impact. The thicker the concrete, the harder it is to remove.
What are the two types of concrete?
There are two basic types of concrete: unreinforced, which is just a concrete slab, and reinforced, which has rebar embedded in it. Both have a range of removal costs, depending on the location and size of the area, thickness, and how difficult it is to get machinery into the area: Concrete Type.
How much does it cost to cut rebar?
This requires cutting through both the concrete and the rebar and costs between $4 - $6 a square foot.
How much does it cost to remove an old foundation?
If you have an old foundation that needs to be removed to replace an existing foundation or make way for new construction, the cost to remove an old one is between $4,000 and $10,000, depending on the size and how it was reinforced.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
How much does it cost to remove concrete?
How Much Concrete Removal Costs. On average, concrete removal costs roughly $2 – $6 per square foot, but this will vary depending on the complexity of the project, how easy the concrete is to access with equipment, where you live, and who you hire.
How long does it take to remove concrete?
On average, it takes less than one day to remove a concrete patio. Of course, your exact project timeline will depend on a number of factors, just like the ones that affect your project’s cost. (The longer your project takes, generally the more expensive it will be.)
Can you remove concrete yourself?
Demolishing concrete may seem like a daunting, expensive task but depending on the size and thickness of your slab, you might be able to tackle the project on your own. According to Yuka Kato at Fixr, the cost to have a professional remove a concrete slab varies based on the size and materials it contains.
What can dissolve concrete?
Concrete is a durable building material that takes special materials to dissolve once it’s hardened into place. Phosphoric acid and trisodium phosphate are the main compounds used to dissolve concrete leftover from masonry work.
What is the best tool for breaking up concrete?
Tool #1: Sledgehammer + Pry Bar When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.
When should I redo my driveway?
Typically you’ll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.
How do you break concrete by hand?
Dig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax.