The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
| Driveway Paving Cost Calculator | Zip Code | |
|---|---|---|
| Basic | Best | |
| Installation Cost | $1250.00 - $1275.00 | $2250.00 - $2900.00 |
| Total | $1625.00 - $1712.50 | $2800.00 - $3550.00 |
| Total Average Cost per square foot | $6.67 | $12.70 |
How much does it cost to have a paved driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How many does it take to pave a driveway?
This important process will take place on the same day as we remove the old paving. 1-10 Days Later. Paving – Usually taking just one day, paving is a fascinating process to observe. Our paving machine will lay down a smooth, even thickness of asphalt. Trucks will arrive with hot-mix asphalt to supply the paving machine.
How much is it to pave a driveway?
There is also the gradient to consider. 'You want the driveway to drain surface water within the boundary of your property, so to achieve this, the driveway will need a gentle gradient called the "fall",' explains Cass. The fall should be between a 1:60 and 1:80 gradient and direct the run-off somewhere suitable (more on this below).
How much should shoveling a driveway cost?
- The total amount of space that the driveway takes up.
- Whether or not you’re going to hire a contractor or a company.
- How many days of work it will take.
- The material that you will use for your driveway.
- The local price of driveway materials.
- The type of driveway that you decide upon.
- The condition of the site.
- Whether landing clearing is required or not.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a concrete driveway cost?
The price for a concrete driveway ranges between $8 and $18 per square foot. Stamped concrete runs on average $18 per square foot, but can be between $10 and $50 per square foot with labor.
How to calculate square footage of driveway?
To calculate your square footage, all you need is an extra set of hands, a tape measure, markers, and a notebook and pen. Measure the length of the driveway from the road to where the driveway will end.
What does it mean when your driveway is cracked?
A cracked, crumbling, or potted-out driveway can make your house feel less like a home and set the wrong impression. If you’re looking to repave your driveway or transform a gravel or dirt driveway into asphalt or concrete, you will need to invest some money.
What is stone pavers?
Stone pavers offer homeowners a rarer choice of driveway materials, adding greater curb appeal and setting your home apart from others. Pavers also look warmer and more inviting. Additionally, you can customize your pattern, color, and material when selecting your paver styles.
Why invest in asphalt driveway?
When you invest in asphalt or concrete, you’re investing in the value of your home and creating greater curb appeal to attract more buyers.
Why is my asphalt cracking?
With enough heat, asphalt can loosen and become soft, becoming gooey or sticky. This can cause cracking and splitting. In addition to requiring a bit more maintenance, asphalt also only comes in one color: black, which causes it to get extremely hot during scalding summer days.
How long does concrete last?
Compared to asphalt, concrete has a longer lifespan with the average being 30 to 40 years. Cons. Concrete may offer you greater variety in visual appearance, but it also stains more easily. These stains are most often from tire marks, winter salts and deicers, and oil.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.