Driveway repair cost
| Project | Cost per square foot |
| Concrete driveway lifting / mudjacking | $3 – $6 |
| Asphalt driveway repairs and patching | $2 – $5 |
| Asphalt driveway repairs (saw cut) | $4 – $12 |
| Asphalt driveway repairs (infrared) | $2 – $6 |
How much does it cost to repair an asphalt driveway?
Repairing your asphalt driveway tends to cost between $800 and $2,500, depending on the same factors mentioned above. The national cost average for this project is about $1,500. Several special considerations apply, especially compared to concrete driveways.
How much does it cost to Blacktop a driveway?
‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.
How do you replace asphalt driveway?
- Demolition of an existing pavement
- Grading and sloping the ground
- Installation of the sub base to provide a stable surface
- Tack coating the sub base to create a solid bond between the incoming asphalt layer and the sub base
- Laying and compacting of asphalt
How much does it cost to cut asphalt?
The outdoor cost, 1 to 1.5 inches in depth, can be about $0.60 per linear foot, while indoor cutting costs can around $1.50 per linear foot. However, the outdoor costs, with a depth of 16 inches, will cost about $5 per linear foot, while the indoor price is around $8 per linear foot.
Should I resurface or replace my asphalt driveway?
Resurfacing is best for driveways that are aging or have more than 25% of the surface covered in light to moderate damage. If you resurface the entire driveway, it will look brand new. Replacing the driveway is necessary if your driveway has large potholes or several cracks wider than 1/4-inch.
Can you put new asphalt over old asphalt?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
Can you repair a crumbling asphalt driveway?
If the asphalt has only had cracks appearing recently, you can easily repair them with the help of a reliable contractor. When you're repairing cracks and potholes, it's best to fill in any depressed areas and seal your driveway afterward to stop it from crumbling again any time soon.
How often should an asphalt driveway be replaced?
between 15 and 20 yearsAn asphalt driveway will last between 15 and 20 years. You can extend the life of an asphalt driveway with regular maintenance.
How do you repair damaged asphalt?
0:532:03HouseSmarts Fix it in 15 "Patching Asphalt Driveways" Episode 206YouTubeStart of suggested clipEnd of suggested clipAsphalt that's around the perimeter gets removed as well. Then. You take the patching. Product inMoreAsphalt that's around the perimeter gets removed as well. Then. You take the patching. Product in this case our aqua fault and pour it into the hole.
How do you dig up old asphalt?
Asphalt driveway removal can be accomplished using a jackhammer to break up the asphalt or even a circular saw to cut the driveway into small pieces. The best way to remove asphalt, however, is with a larger piece of equipment, such as a Caterpillar 303 excavator from a rental center.
What is the cheapest way to resurface a drive?
How much will my new driveway cost? The cost of a new driveway will depend on the groundwork and the material chosen. Generally, gravel is the cheapest material, with resin and concrete being the most expensive.
How do you fix depression on an asphalt driveway?
How to fix depressions in asphaltA temporary fix for minor depressions is a simple asphalt patch on top of the existing pavement. ... Permanent repair of asphalt depressions requires that the affected area be removed, the poor sub-grade be replaced, and a full-depth patch be applied over the repaired sub-grade.
How do you restore an asphalt driveway?
InstructionsClean Out the Cracks. Cracks in asphalt driveways can easily lead to weeds taking advantage of the space. ... Apply Weed Killer. ... Fill in Small Cracks. ... Fill In Deep Cracks. ... Apply Patching Compound. ... Let the Asphalt Repair Cure. ... Apply Sealant to the Repaired Area.
How can I make my asphalt driveway look better?
Cracks form in the asphalt from settling or from hot and cold expansion. Press or caulk asphalt crack filler into cracks to seal them. Remove all plant life from the crack, clean it with a stiff bristled brush and fill the crack. This will turn a tattered-looking asphalt face into a smooth-looking asphalt surface.
How do you fix a cracked driveway?
0:074:57How to Repair Broken Concrete on a Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're using a bashed concrete rotary hammer with bashed chisel this setup works great for smallMoreWe're using a bashed concrete rotary hammer with bashed chisel this setup works great for small concrete projects or to remove some old tile.
How long does it take to redo a driveway?
Generally speaking, it takes anywhere from 3-7 days to fully demolish an old driveway and pave a new one. After new asphalt has been paved, you can expect about 5 days of initial curing before you can park your vehicle on the driveway again. It takes about 2 weeks to fully cure.
How Much Does It Cost to Repair or Patch an Asphalt Driveway?
An asphalt driveway can last for 15 to 20 years. However, cracks and holes can appear over time. When they do, you’ll want to find an asphalt mix that works for your repair and the best price. You’ll also want to decide if you want to hire an asphalt pro near you or do it yourself.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Near You?
Cold or hot temperatures can impact how long an asphalt driveway will last. Plus, it’s possible that UV radiation from the sun can undermine asphalt over time. If you live in an area with seasonal changes, then the price to repair and patch your asphalt driveway can vary quite a bit from the cost in more temperate climates.
What Factors Influence the Cost to Repair or Patch an Asphalt Driveway?
While asphalt is known to be fairly inexpensive, to figure out a more exact price, there are a few factors to take into account. If you are in an area with very hot or freezing temperatures or the type of asphalt solution you choose can raise or lower your total costs.
How Much Does It Cost to Repair or Patch an Asphalt Driveway Yourself?
Sometimes you can repair and patch your asphalt driveway yourself. It may be a dirty job and will take time, but you can save money when you do it yourself.
Repair or Patch an Asphalt Driveway Cost Breakdown
Asphalt is durable. However, in very cold or very hot conditions, even asphalt can break down, and surface-level damage, like cracks and potholes, can appear. For small potholes and cracks—less than one-fourth inch thick—pros will typically charge anywhere from $5 to $15 per square foot .
What is a crack sealant made of?
Hot-pour sealants have an asphalt cement base that might also include rubber and other materials to allow the seal to flex in hot or cold temperatures. Asphalt emulsion sealants are not heated but are liquid applications that use water and an emulsifying agent to allow the asphalt and water to mix.
How often should an asphalt driveway be seal coated? At what cost?
To maintain your asphalt driveway, pros at the Asphalt Institute agree that a seal coat should be applied every 4 to 5 years. Pricing varies, but you will pay about $.08 to $.16 per square foot from start to finish.
Asphalt Repair Cost per Square Foot
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs.
Cost to Repair an Asphalt Driveway by Type of Repair
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Asphalt Driveway Repair Cost by Solution
Repair workers use various repair methods to fix your driveway’s issue, depending on the problem. If there is a crack, they usually fill it in. However, it might need a different treatment like resurfacing if the driveway is crumbling. Different repair methods have differing costs.
Labor Costs to Repair an Asphalt Driveway
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
Asphalt Driveway Maintenance
A good way to reduce the risks of asphalt damage and repairs is to ensure your asphalt driveway is well-maintained.
Repair vs Replace an Asphalt Driveway
You may be faced with the decision of repairing or replacing your asphalt driveway. Often, the best course of action is to repair the driveway. This is cheaper, simpler, and faster in most cases.
Enhancement and Improvement Costs
Pressure washing an asphalt driveway averages $135 to $180. Pressure washing is a great way to clean dirt, debris, and stains from the driveway. Many hire professionals for this service because asphalt responds better to low pressure and must be cleaned with care for the best results.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How much does it cost to fix a crack in a concrete driveway?
The average cost to repair cracks in a concrete driveway is $0.50 to $3 per linear foot. Minimum service fees of $100 to $250 apply to patch, seal, and fix cracks. Driveway crack filler costs $5 to $10 per bottle to repair 24 linear feet of cracks less than a 1/4" wide yourself.
How much does it cost to repair a cobblestone driveway?
Repairing a cobblestone driveway costs $8 to $20 per square foot to replace individual stones and $3 to $5 per square foot for sand to fill and level sunken areas. Settling is the most common problem with cobblestone. Pros charge $6 to $12 per square foot to relevel large areas.
How much does it cost to patch a pothole?
Filling or repairing potholes costs $100 to $400 on average, depending on the size, depth, extent of the damage, and repair method. Patching costs $25 to $40 per pothole plus $100 to $250 to bring the equipment and crew to the job site.
How much does it cost to replace brick pavers?
Brick pavers cost $0.50 to $1.80 per brick or $2 to $8 per square foot. One benefit of brick paver driveways is that damaged bricks can be replaced individually. Level sunken areas by removing the pavers, filling the space with sand, and compacting the sand until it's flat.
How much does it cost to level a driveway?
Driveway leveling costs $600 to $1,200 to lift a small sinking section or $1,400 to $2,700 to level an entire driveway. Filling and leveling small surface areas costs $2 to $5 per square foot. Sinking, settling, and buckling are caused by water damage, tree roots, and foundation problems.
How old should a driveway be to replace it?
Age – Homeowners should consider replacing asphalt driveways older than 15 to 20 years and concrete driveways older than 25 years. After so many years, the foundation begins to deteriorate, and problems are more likely to recur even after repairs.
How much does it cost to fix a blemish on asphalt?
It ranges between $100 and $250 depending on the size of the pavement being fixed. Infrared repair can help to restore your paving and eliminate its defects. The infrared lighting heats the damaged surface, helping to remove it. Then, new asphalt can be added in order to fix the blemish.
When is it necessary to replace a driveway?
Replacement is necessary when the existing surface is badly deteriorated or the underlying gravel base shows signs of failing. Removal and replacement is also necessary if the proper drainage of the driveway cannot be achieved because the area is too flat. Help us improve this article.
How much does it cost to fix a pothole?
While most homeowners pay $2,310, the the type of damage can vary project costs. Fixing potholes and cracks can be as low as $100 to $300 while major repairs requiring asphalt resurfacing can cost up to $3,000 or more. First, fixing paving can be a very labor-intensive task that can be extremely complicated if specific steps are not followed ...
Why is my driveway cracking?
Repairing. A driveway imbalance or caving can produce surface-level cracks due to lack of underlying support. This is important to consider since vehicle traffic can weigh heavily on the asphalt and worsen these issues. Simple repairs make the most sense when the damage is surface-level, or contained to a small area.
How long does asphalt last?
Finally, there will come a time when your asphalt needs complete replacement. A typical driveway, for instance, lasts about 20 to 25 years before this replacement is necessary. One sign to look out for are so-called alligator cracks, named after their resemblance to alligator skin.
How much does it cost to repair infrared light?
It ranges between $100 and $250 depending on the size of the pavement being fixed.
Can you put asphalt over a pothole?
If your base is still sound, you can possibly install a new layer of asphalt over the old to resurface the existing area. When the cracks and potholes you find indicate larger issues, or they occur in more than one spot, resurfacing may make more sense. It does not take care of all underlying issues, but still extends the lifespan of the area.
How much does it cost to resurface a driveway?
Resurfacing involves adding a layer of asphalt to your driveway and typically costs between $4 and $10 per square foot. While it won’t repair underlying issues, it will extend the lifespan on your driveway. To further extend the life of your driveway, ask your pro about having it sealed.
How much does it cost to install asphalt?
If you’re looking to install an all-new asphalt driveway, it will usually cost between $10 and $18 per square foot. That being said, these costs can fluctuate depending on the amount of prep work the area needs, permits, access to the property and the exact type of asphalt you’re installing.
Is asphalt cheap?
While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project. Here’s what it will cost to repair, replace or install an asphalt driveway.
Is asphalt driveway cheap?
Asphalt is the driveway material of choice for many Canadian homeowners due to its durability and affordability. While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project.
Driveway Repaving Prices
Here are the prices you can expect to pay for materials used in a driveway repaving, depending on what you want to use:
Driveway Repaving Installation Cost
This job has two phases of labor costs. The first is the demolition phase when the old driveway is broken up and removed, and the second phase is the installation of the new driveway in the footprint of the old driveway (or in a completely new location if so desired).
Driveway Repaving Cost by Square Foot
Generally, you can expect to pay between $6 and $22 per square foot to repave a driveway. This includes both the demolition of the old driveway and the installation of a new asphalt driveway.
Driveway Repaving Cost Factors
As you can see, there's a wide range of costs for repaving driveways. That's because a lot of factors go into this project that will affect the price tag.
Cost to Repave a Driveway Yourself
This is generally not something you want to do yourself. However, if you did have the experience with this project, and you had all of the heavy equipment needed to do it, you could complete the project for significantly less than if you contracted it out since much of the costs come from labor.
DIY vs. Hire a Driveway Paving Contractor
We'll be upfront about this one: This is not a job you should attempt on your own. Many projects are great for DIYers; this is not one of them. Driveway paving requires heavy equipment and is backbreaking work.
FAQs
It's perfectly fine to pave over an existing driveway if you just want to give it a new surface. In fact, an asphalt surface that is already there is the best base for a new asphalt surface. You'll need to coat the existing surface to ensure that the new asphalt adheres, but it is a great cost-effective option compared to repaving.
How much does it cost to repair a driveway?
If you choose to hire a professional, getting your driveway repaired will typically cost between $850 to $3,100.This is about $6 to $10 per square foot, depending on what you’re patching up.
What to do if your driveway is crumbling?
On the other hand, if your driveway is almost entirely crumbled, you will need to do a full re-pave to get the smoothness you want. If you are not sure that you will be able to do this job, or you don’t have the tools, you should consider consulting a specialist.
What causes asphalt to crumble?
There are several things that can lead to your asphalt driveway crumbling, such as: 1 Weather changes 2 Asphalt that is not sealed properly 3 Wear and tear
Why is asphalt weak?
Asphalt isn’t strong enough to withstand nature’s effects, mostly if the asphalt is laid in a state where it rains a lot, such as Washington and Oregon. The water will sink into the asphalt and freeze, which then causes it to crack. This makes the asphalt weak and prone to wear and tear over time.
Can you do a DIY job on a crumbling driveway?
There are cracks and crumbles, and then there are driveways that are barely driveways anymore. If your driveway is just starting to crumble or has a couple of cracks, then you can do a DIY job without much issue.
Does heat affect asphalt?
However, on the other hand, heat can also make the asphalt weak. So, places like Arizona and New Mexico are more prone to crumbling asphalt. If you live in an area with lots of rain, or lots of heat, keep an eye on your asphalt or use a different product.
Can you seal asphalt?
Asphalt Isn’t Sealed The Right Way. If asphalt wasn’t cured before seal coating, this could cause issues as the asphalt was not sealed the correct way. Actually, you may even have to wait up to a year to even seal the asphalt in the first place, or else, the flexible nature of the asphalt will disappear.