The Cost of Repairing or Replacing Asphalt Driveway
- Repairs and Resurfacing $4-$10/square foot. Asphalt is durable, but it does need some maintenance and repairs every...
- Replacement $11-$21/square foot. If you suspect that the foundation of your driveway needs attention, it’s best to have...
- Installation $10-$18/square foot. If you’re looking to install an all-new...
How much does it cost to fix an asphalt driveway?
The price can rise or fall depending on many factors including location, quality of material, depth of material required, and the size of your drive. Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000.
What is the average cost to repair a driveway?
To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues. The average cost to fix a concrete driveway ranges between $500-$1,100, with the average homeowner spending $800 to resurface a 250 square foot area, including labor and materials.
When to seal, replace or resurface an asphalt driveway?
There are a number of reasons why a drive should be replaced but the most common are:
- Age. The typical service life for an asphalt drive is 20 to 30 years. ...
- Failing Subbase. Your drive sits on top of a subbase consisting of 6 to 9 inches of gravel. ...
- Substandard Materials or Construction. Contractors looking to take shortcuts, take them in the preparation of the subbase. ...
How much does it cost to Blacktop a driveway?
‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.
How much does it cost to patch asphalt?
Asphalt patching cost. Asphalt patching costs $50 to $300 on average, depending on the size and repair method. The cheapest way to repair an asphalt driveway is with cold-mix asphalt, which costs $2 to $4 per square foot. Hot-mix asphalt repairs are more permanent and always require professional installation.
What is the best way to repair an asphalt driveway?
Depending on the driveway’s age and the level of damages, asphalt driveway repairs include either patching, resurfacing, or repaving. A paving contractor should inspect the asphalt pavement and foundation conditions to provide the best solution.
What to do if your asphalt is not level?
If the asphalt surface is no longer level and has extensive cracks or holes, hire a paving professional. Hire a contractor or smaller company for minor asphalt repairs. Larger asphalt companies typically do resurfacing or repaving jobs only.
How much does it cost to repair a sinking driveway?
Repairing a sinking asphalt driveway costs $2 to $5 per square foot to fill and level small surface areas. Replacing sunken sections costs $4 to $10 per square foot for driveways with foundation issues. Hire an asphalt repair specialist to diagnose the problem.
How much does it cost to fix a pothole?
Pothole patching costs $25 to $40 per pothole plus $100 to $250 for bringing out the machinery and crew.
How much does it cost to replace a garage apron?
Asphalt garage apron repair costs $2 to $5 per square foot to fill and level the sunken pavement. Replacing a 2-car (10’x20’) garage or driveway apron costs $800 to $2,000 on average or $4 to $10 per square foot and is a more permanent solution.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
Asphalt Repair Cost per Square Foot
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs.
Cost to Repair an Asphalt Driveway by Type of Repair
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Asphalt Driveway Repair Cost by Solution
Repair workers use various repair methods to fix your driveway’s issue, depending on the problem. If there is a crack, they usually fill it in. However, it might need a different treatment like resurfacing if the driveway is crumbling. Different repair methods have differing costs.
Labor Costs to Repair an Asphalt Driveway
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
Asphalt Driveway Maintenance
A good way to reduce the risks of asphalt damage and repairs is to ensure your asphalt driveway is well-maintained.
Repair vs Replace an Asphalt Driveway
You may be faced with the decision of repairing or replacing your asphalt driveway. Often, the best course of action is to repair the driveway. This is cheaper, simpler, and faster in most cases.
Enhancement and Improvement Costs
Pressure washing an asphalt driveway averages $135 to $180. Pressure washing is a great way to clean dirt, debris, and stains from the driveway. Many hire professionals for this service because asphalt responds better to low pressure and must be cleaned with care for the best results.
How much does it cost to fix a blemish on asphalt?
It ranges between $100 and $250 depending on the size of the pavement being fixed. Infrared repair can help to restore your paving and eliminate its defects. The infrared lighting heats the damaged surface, helping to remove it. Then, new asphalt can be added in order to fix the blemish.
When is it necessary to replace a driveway?
Replacement is necessary when the existing surface is badly deteriorated or the underlying gravel base shows signs of failing. Removal and replacement is also necessary if the proper drainage of the driveway cannot be achieved because the area is too flat. Help us improve this article.
How much does it cost to fix a pothole?
While most homeowners pay $2,310, the the type of damage can vary project costs. Fixing potholes and cracks can be as low as $100 to $300 while major repairs requiring asphalt resurfacing can cost up to $3,000 or more. First, fixing paving can be a very labor-intensive task that can be extremely complicated if specific steps are not followed ...
Why is my driveway cracking?
Repairing. A driveway imbalance or caving can produce surface-level cracks due to lack of underlying support. This is important to consider since vehicle traffic can weigh heavily on the asphalt and worsen these issues. Simple repairs make the most sense when the damage is surface-level, or contained to a small area.
How long does asphalt last?
Finally, there will come a time when your asphalt needs complete replacement. A typical driveway, for instance, lasts about 20 to 25 years before this replacement is necessary. One sign to look out for are so-called alligator cracks, named after their resemblance to alligator skin.
How much does it cost to repair infrared light?
It ranges between $100 and $250 depending on the size of the pavement being fixed.
Can you put asphalt over a pothole?
If your base is still sound, you can possibly install a new layer of asphalt over the old to resurface the existing area. When the cracks and potholes you find indicate larger issues, or they occur in more than one spot, resurfacing may make more sense. It does not take care of all underlying issues, but still extends the lifespan of the area.
How much does it cost to fix a crack in a concrete driveway?
The average cost to repair cracks in a concrete driveway is $0.50 to $3 per linear foot. Minimum service fees of $100 to $250 apply to patch, seal, and fix cracks. Driveway crack filler costs $5 to $10 per bottle to repair 24 linear feet of cracks less than a 1/4" wide yourself.
How much does it cost to repair a cobblestone driveway?
Repairing a cobblestone driveway costs $8 to $20 per square foot to replace individual stones and $3 to $5 per square foot for sand to fill and level sunken areas. Settling is the most common problem with cobblestone. Pros charge $6 to $12 per square foot to relevel large areas.
How much does it cost to patch a pothole?
Filling or repairing potholes costs $100 to $400 on average, depending on the size, depth, extent of the damage, and repair method. Patching costs $25 to $40 per pothole plus $100 to $250 to bring the equipment and crew to the job site.
How much does it cost to replace brick pavers?
Brick pavers cost $0.50 to $1.80 per brick or $2 to $8 per square foot. One benefit of brick paver driveways is that damaged bricks can be replaced individually. Level sunken areas by removing the pavers, filling the space with sand, and compacting the sand until it's flat.
How much does it cost to level a driveway?
Driveway leveling costs $600 to $1,200 to lift a small sinking section or $1,400 to $2,700 to level an entire driveway. Filling and leveling small surface areas costs $2 to $5 per square foot. Sinking, settling, and buckling are caused by water damage, tree roots, and foundation problems.
How old should a driveway be to replace it?
Age – Homeowners should consider replacing asphalt driveways older than 15 to 20 years and concrete driveways older than 25 years. After so many years, the foundation begins to deteriorate, and problems are more likely to recur even after repairs.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.
How much does it cost to resurface a parking lot?
The average cost to resurface a parking lot is $1 to $3 per square foot or $300 to $900 per parking space. The average parking space needs 300 square feet to include room for the stall, lanes, entrances, and exits. Additional fees for inspections and permits vary by city.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot or $600 to $1,800 for a 24×24 (2-car) driveway. Installing gravel is easier and typically includes minor grading and leveling. Return to Top.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How much does it cost to repair a concrete driveway?
Fixing holes, cracks, and spalling is required before sealing concrete. Concrete driveway repair costs $3 to $8 per square foot on average.
How much does asphalt driveway sealer cost?
Asphalt driveway sealer alone costs between $0.06–$0.11 per square foot on average, while additional modifiers or colors may add another $0.60 per square foot. Coverage rate also depends on the condition and texture of the asphalt. The sealer can also be mixed with sand, which helps add traction back to an asphalt surface.
How much does it cost to seal a 20x24 driveway?
The average cost to seal a 20′x24′ two-car driveway is between $100 and $190 depending upon the extent of cracks and holes, the size and layout of your driveway, and the type of sealer used. Contractors typically charge a minimum fee of $100 to $200 regardless of project size and add 50% more to your total cost if two coats are required.
How much does it cost to seal a 1,000 square foot driveway?
For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating. Prices depend on whether you get one or two coats and most will charge a minimum fee of $100 to $200 for the project. Blacktop driveway sealer not only helps protect it from natural elements, machine leaks, and other spills, ...
Why was asphalt sealer created?
Created because of the diminishing availability of coal. An asphalt sealer. Quality depends on the type of crude oil used in its manufacturing process and the refinery’s preferred method of blending.
How much does it cost to seal asphalt?
In the United States, the average cost for materials and labor to sealcoat asphalt is $0.17 to $0.24 per square foot. For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating.
How many square feet is a 2 car driveway?
The average two-car driveway is between 480 and 650 square feet which will help calculate the cost. Depending on the current condition and age of your driveway, you may pay extra for patching holes or other common repairs.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.