Concrete driveway cost
| Size | Square feet | Average cost |
| 10x20 Driveway (1-Car) | 200 | $800 – $1,600 |
| 12x24 Driveway (1-Car) | 288 | $1,200 – $2,300 |
| 20x20 Driveway (2-Car) | 400 | $1,600 – $3,200 |
| 24x24 Driveway (2-Car) | 576 | $2,300 – $4,600 |
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
What is the average price of a concrete driveway?
The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
How much does it cost to build a concrete driveway?
Whether you’re replacing or building a new driveway, the average concrete driveway cost is $3,000 nationally, with a range of $1,800 to $6,000. It’s a worthy investment to make since it protects...
How much does it cost to repair a cement driveway?
The cost to Repair Concrete starts at $9.75 - $11.54 per square foot, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to repair concrete, along with per unit costs and material requirements. See professionally prepared estimates for concrete repair work.
How much does it cost to pour a 24x24 slab of concrete?
between $3,057 and $5,944A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How do you estimate a concrete driveway?
Multiply the square footage by the depth in feet to find the volume in cubic feet. You can find volume by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.
How many yards of concrete do I need for a 24x24 slab?
7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
How thick should my concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How much does a 2 car driveway cost?
x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
How much does it cost to remove a driveway?
Existing driveway removal – This normally runs in the neighborhood of . 50 – $1.50 per square foot. This involves the use of heavy equipment, such as: Jack hammers, Bobcats, etc.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Can you install concrete driveways?
Installing Concrete driveway isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a landscaping or, mason company to perform the work for you. Landscaping or, mason companies will most always get better prices on Concrete driveway — saving your back and additional costs, so shop around, ask your neighbors if they can recommend someone.
How much does it cost to build a concrete driveway?
A concrete driveway costs from $8 to $18 per square foot , depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install. Concrete is ideal for getting the look of stone or pavers, without the high cost.
How many square feet are there in a 2 car driveway?
is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
What is the most variance in concrete?
Design: With the many design options concrete offers, this is where the most variance can occur. From simply including an integral color in the mix to a complicated stamped and stained design, the parameters are really up to you and what you want to spend. (See pictures of decorative concrete driveways .)
How to find out what you'll pay for your driveway?
The best way to find out what you'll pay for your project is to get quotes from concrete driveway contractors near you . But, to help you budget, here are average price ranges for decorative concrete driveways:
What is the driveway of a house?
The driveway is often the first thing visitors, or potential buyers, see when they arrive at your home. To make a good first impression, it should be welcoming, clean, and in good repair. This can set the tone for potential buyers that the rest of the property will follow suit.
How long does concrete last?
Concrete is more durable than asphalt and requires less maintenance. It can last for decades, while asphalt will generally only last 10 to 15 years before needing replacement. There are many repair options for concrete as well that can extend its life even further.
Is asphalt cheaper than concrete?
ASPHALT DRIVEWAY COST VS. CONCRETE. Initially, asphalt can be a less expensive option than concrete, with asphalt installation averaging $3 to $5 per square foot and plain gray concrete at $5 to $7. However, in the long run, concrete can be the better economical choice. Concrete is more durable than asphalt and requires less maintenance.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How much does it cost to install asphalt?
The price to install an asphalt driveway is comparable to concrete, at about $7 to $13 per square foot compared to $4 to $15 per square foot for the concrete mix. But asphalt doesn't last as long and requires more maintenance, potentially increasing long term costs.
What is the difference between concrete and asphalt?
The difference between concrete and asphalt comes down to price, look and durability.
How much does it cost to stain a driveway?
Adding staining to the driveway installation increases project prices to $6 to $12 per square foot. It is done while the material is still wet and allows you to add a tint that matches your home in almost any color.
How many hours do you need to work on concrete?
Expect to spend at least 50 hours of total work on the project.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does a concrete driveway cost?
A simple concrete driveway will vary somewhere between $4 and $7 per square foot. That consists of about $3 to $4 per square foot for products and $2 to $3 per square foot for labor. A strong blend with 5,000 or more pounds per inch strength leaves you at the higher end of that range.
How much does it cost to put stamped concrete in a driveway?
Setting up stamped concrete will cost somewhere between $8 and $15 per square foot. This alternative enables you to include patterns and texture in your driveway. You can mark the material to seem like inlaid stone, tile, and even strong marble.
How much does it cost to replace a driveway?
Replacing your driveway will cost somewhere between $2,200 and $7,500. That consists of both the rate to get rid of the existing concrete (which costs about $540 to $1,510) and the brand-new setup cost of anywhere from $1,800 to $6,000. The specific rate depends upon the size and kind of cement.
What factors affect the price of a concrete driveway?
The vast ranges throughout this article are mostly due to the many elements that can affect the price of your concrete driveway. Style, products, labor costs, and the location and environment in which the setup happens all contribute.
How much does it cost to build a driveway?
It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation. You can save money by choosing a material that fits your budget, but each material has a different lifespan, so weigh the costs against the longevity.
How much does a new driveway add to the value of a home?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
How long does a gravel driveway last?
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance. Concrete will expand and contract, leading to chips and cracks, plus it will stain easily. Concrete driveways typically last between 25 and 75 years.
What is the cheapest driveway material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a heated driveway cost?
Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot. But a heated driveway is only desirable in colder climates where it can melt ice and snow in winter.
How long do pavers last?
Pavers are another option and come with a 25- to 75-year lifespan. They cost more and will take longer to install.
When is the best time to build a driveway?
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does concrete cost?
For plain concrete, you can expect your price to fall somewhere between $4.25 and $6.25 square foot depending on the project size and complexity.
How much does it cost to have concrete poured?
Expect to pay between $4.25 and $6.25 per square foot to have a plain concrete slab poured. To get an even better idea of how much your project will cost, get quotes from local contractors that can come see the site.
What are the materials used in decorative concrete?
The typical materials used are concrete mix, forming supplies, texturing and coloring products, sealers, etc. Labor will vary depending on your project - its size, whether you have new or existing concrete, how detailed the decorative work will be and more. Get bids from multiple contractors to make sure you are getting a fair deal.
What are the factors that determine the price of concrete?
Some of these factors include the following: grading, subbase preparation, concrete forms and finishing, reinforcement, and the local cost of concrete.
What factors affect the cost of concrete?
Factors that influence the cost of decorative concrete: 1 The number of colors used 2 The number of stamping textures used 3 The detail of the design (i.e. complicated patterns are expensive) 4 Special details such as embeds (common in countertops) 5 Specialty form or mold work (i.e. curves and unique shapes cost more) 6 Level of polishing
What makes up the majority of the cost of a concrete project?
Concrete makes up the majority of the cost of a concrete project. Prices vary by region, to get a more accurate estimate contact your local Ready-Mix supplier.
What is concrete used for?
Concrete is a versatile material that can be used for floors, countertops, patios, driveways and more. Techniques such as stamping, staining and polishing, can transform concrete to look like flagstone, marble or other expensive materials at a fraction of the cost.