Asphalt removal costs roughly $1-$3 per square foot on average, including debris disposal. The cost to demolish the average asphalt driveway and remove the debris is between $1,000 and $3,000.
How do you calculate asphalt removal?
Hiring a company to break up and remove asphalt paving runs roughly $2.50-$3.50 a square foot (although small jobs may cost more per square foot). A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base.22-Apr-2015
How hard is it to remove asphalt?
The large chunks of asphalt can be broken apart later with a saw, jackhammer, pick ax or shovel. Try to excavate as close to your home as possible, but use manual tools to break up the asphalt closest to your home because the heavy equipment can damage structures and power lines.
Should I remove old asphalt driveway?
“You should replace your driveway when it's broken up to the point you're tripping and falling over it. My parents' driveway is around 50 years old and they're in their 80s. It has no safety hazards for them, even at their age, so there's no sense in replacing it.”13-May-2021
How do you destroy asphalt?
There are three things that will destroy an asphalt parking lot if proper maintenance isn't performed in a timely manner.Surface Water. When an asphalt parking lot is installed, it is typically designed to sweep the water off the surface so it doesn't pool in place. ... Heavy Vehicles. ... Tree Roots.01-Dec-2020
How do you excavate asphalt?
0:309:42Asphalt Excavation (4K) Electrical - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd electrical lines need to be buried at least 24 inches below the surface. So we're going toMoreAnd electrical lines need to be buried at least 24 inches below the surface. So we're going to excavate that and we're not an electrician.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.25-Feb-2019
Can new asphalt be laid over old?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt.
How much does it cost to top coat a driveway?
The average cost for a contractor to sealcoat your asphalt driveway is $0.17 to $0.24 per square foot. Driveways measuring 480 square feet cost $80 to $115 to sealcoat. Larger driveways cost $170 to $240 to sealcoat. Cost ranges may vary by contractor and region.28-Oct-2019
What will destroy asphalt?
Water. Water has many ways of getting into the cracks of asphalt pavement. Whether it's rainwater, snowmelt, water from people washing their cars, the vase course of your pavement will be damaged when the integrity of your asphalt is compromised. Drainage from underground water is also a contributing factor.25-Mar-2020
What will break down asphalt?
If you do not have turpentine, diesel or kerosene works reasonably well to dissolve asphalt.17-Jul-2017
What will damage asphalt?
Fuel and oil can quickly deteriorate your asphalt pavement surface. Sealcoating applications do not stick to vehicle fluid on an asphalt surface, so you loose a layer of protection. In addition, over time the fuel and oil begin to penetrate the surface and can break up the aggregates of the asphalt.13-Sept-2019
How thick should asphalt be?
Although good asphalt paving should be 3-4 inches thick on a 4-6 inch gravel base, residential asphalt may have been installed only an inch or two thick, with little or no base under it -- which makes removal easier.
How much does it cost to rent a concrete saw?
If removing only part of the asphalt and needing to leave a straight line, renting a concrete saw should be about $30-$50 (plus possibly another $25-$125 for wear on a diamond-tipped blade). For large projects, renting a small backhoe or skid-steer (also called a bobcat) with a breaker attachment can be $150-$350 a day.
Can you remove old asphalt?
For larger projects requiring heavy machinery, most excavation or paving contractors also remove old asphalt. Asphalt companies often have equipment specifically designed to rip out old asphalt, although typically they do this as part of a replacement project.
How much does it cost to remove asphalt?
Hiring a company to break up and remove asphalt paving runs roughly $2.50-$3.50 a square foot ...
How much does a short driveway cost?
A short driveway (10x20 to 12x25 feet) might run $500-$1,000 or more, depending on total size and the thickness of the asphalt and the gravel base. At least two business days before any digging, call 811 (the free national Call Before You Dig service) to have utility companies mark any underground lines on your property.
Asphalt Driveway Removal Average Cost
The national average cost of asphalt driveway removal is $1,000-$3,000, including debris disposal, and averages out to $1-$3 per sq ft.
Factors That Affect Asphalt Driveway Removal Pricing
There are a variety of things that can affect the cost of your specific asphalt driveway removal project.
How to Find the Right Asphalt Driveway Removal Contractor
Hiring an experienced asphalt removal contractor to handle your driveway removal project is important for a number of reasons, but more than anything, it's for your protection.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much asphalt does a tandem truck carry?
Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance. Bulk asphalt cost per truckload - chart.
Where are catch basin collapses?
We commonly perform this procedure for catch basin collapses in parking lots throughout Ontario, including Toronto, Ottawa, North York, Brampton, Windsor, Vaughan, and North Bay. Catch basin collapses are a very common type of damage in parking lots throughout the province, but the right asphalt removal and replacement can repair your property.
Why are catch basins important?
Catch basins are essential in parking lots for preventing damage and helping drain the water that can end up causing costly repairs. However, catch basins can easily become damaged themselves. Water and erosion can cause your catch basins to deteriorate before the other parts of your pavement. The blocks and bricks of your catch basin can begin ...
What is the best pavement for a driveway?
When your pavement is cracked, uneven, or forming potholes, then you need asphalt removal and replacement. Asphalt pavement is durable, strong, affordable, and built to last. This is why it is the top pavement choice and is commonly used in most parking lots and driveways.
Can you remove asphalt with sure seal?
With Sure Seal Pavement’s asphalt removal, your damaged pavement is completely removed and then replaced, ensuring that it is as good as new and that no further damage occurs. Once cracks have formed and the ground has begun to degrade, you need to take prompt action to prevent more serious, costly damage from developing.
What causes cracks in asphalt?
Temperature changes, wear and tear, UV rays, rainfall and snowfall, and oil/gasoline spills can all damage your asphalt pavement, causing cracks and fractures. When water seeps into these cracks, it can degrade the ground beneath, causing potholes, uneven surfaces, and other forms of major damage.
What happens if you break down a catch basin?
The blocks and bricks of your catch basin can begin to fall and break down, causing the pavement surrounding your catch basin to crack, fracture, and become uneven. If this is not corrected quickly, severe damage can become a big problem.
What is catch basin repair?
Catch basin repairs effectively rebuild your catch basin and repair the damaged pavement surrounding them. By using catch basin restoration and replacement, you can avoid the most costly, severe types of damage that occur in parking lots and driveways.