Driveway Replacement Process
The driveway is a popular and often used part of the home. It’s where guests park their car, family members get in their cars to go on outings, children play with toys, and pets do their business. In all likelihoods it will have some type of damage over time from weathering or an accident.
Driveway Repair & Replacement of Asphalt Driveway
Driveway repair and replacement are two separate but similar concepts. Driveway repair is the process of making repairs to an existing driveway in order to make it safe and suitable for use.
How To Fix Crumbling Asphalt Driveway
If you have a driveway that is crumbling or cracked with gravel peaking through, it will need to be replaced.
Resurfacing Asphalt Driveway
Resurfacing involves completely removing and replacing the top layers of asphalt, but not the underlying foundation. The existing gravel will be removed and then a new layer of asphalt put down, which will be followed by several layers of sealant.
How Much Does a New Driveway Cost?
The cost of driveway replacement can vary widely depending on size and location. Asphalt driveways are the most popular and standard driveway construction, and are typically priced between $2,500-$7,000 or $6 to $18 per square foot.
Best Base for Asphalt Driveway
The crushed gravel base should be minimum of 4 inches (more is better) under the blacktop layers and should extend beyond the edges of the driveway to stop water runoff from flowing into the base under the driveway. Water is what erodes the gravel base causing the cracking or failure of asphalt driveways.
How Thick Should Base be for Asphalt Driveway?
Commercial driveways and parking lots should have a minimum of 3 inches of asphalt and 8 inches of granular base aggregate, while parking lots should have a minimum of 6 inches of granular base aggregate. Sufficient drainage soil is positioned beneath.
How much does it cost to resurface a driveway?
Resurfacing involves adding a layer of asphalt to your driveway and typically costs between $4 and $10 per square foot. While it won’t repair underlying issues, it will extend the lifespan on your driveway. To further extend the life of your driveway, ask your pro about having it sealed.
Is asphalt driveway cheap?
Asphalt is the driveway material of choice for many Canadian homeowners due to its durability and affordability. While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project.
How much does it cost to install asphalt?
If you’re looking to install an all-new asphalt driveway, it will usually cost between $10 and $18 per square foot. That being said, these costs can fluctuate depending on the amount of prep work the area needs, permits, access to the property and the exact type of asphalt you’re installing.
Is asphalt cheap?
While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project. Here’s what it will cost to repair, replace or install an asphalt driveway.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
Asphalt Repair Cost per Square Foot
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs.
Cost to Repair an Asphalt Driveway by Type of Repair
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Asphalt Driveway Repair Cost by Solution
Repair workers use various repair methods to fix your driveway’s issue, depending on the problem. If there is a crack, they usually fill it in. However, it might need a different treatment like resurfacing if the driveway is crumbling. Different repair methods have differing costs.
Labor Costs to Repair an Asphalt Driveway
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
Asphalt Driveway Maintenance
A good way to reduce the risks of asphalt damage and repairs is to ensure your asphalt driveway is well-maintained.
Repair vs Replace an Asphalt Driveway
You may be faced with the decision of repairing or replacing your asphalt driveway. Often, the best course of action is to repair the driveway. This is cheaper, simpler, and faster in most cases.
Enhancement and Improvement Costs
Pressure washing an asphalt driveway averages $135 to $180. Pressure washing is a great way to clean dirt, debris, and stains from the driveway. Many hire professionals for this service because asphalt responds better to low pressure and must be cleaned with care for the best results.
What is asphalt driveway?
It is also known as blacktop due to its color, asphalt is a mixture of stones and sand, bound together with materials left over during the production of Petrochemicals such as Pertol, Diesel and Gasoline.
How much does it cost to install an asphalt driveway?
dollars on 2017 (6,649 U.S. dollars). The cost to install an asphalt driveway could be between $2,300 and $10,300 and typically the cost is calculated per square foot.
Is asphalt good for cold weather?
Suitable for Cold Climate – Asphalt is less likely to crack in cold weather. It performs better than concrete in very harsh or snowy climates. Snow removal is also easier with asphalt. Won’t show stains – Because asphalt is generally dark in color, in doesn’t show oil stains.
How many square feet does a ton of concrete cover?
One ton material usually covers 40 to 80 square feet. The quantity you need depends on the thickness of the layers such as a 2 inches thick would cost 80 square feet per ton while 4 inches think would cost 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons.
Does asphalt stain floors?
Oily texture – Asphalt has an oily texture that softens in heat or direct sunlight. If the asphalt gets stuck to your shoes and you track it through the house, it can stain your floors. Rough edges – WIth asphalt, it can be difficult to get a straight, clean edge. Concrete Driveway Cost Per Square Foot.
How much does it cost to resurface a driveway?
Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing. The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.
Is concrete good for driveways?
As we all know that concrete is highly durable and long lasting and it is another popular material for driveways, especially in the South ern region. Concrete prepared by mixing Cement with a variety of sand and gravel to create this strong, durable material.
What are the different types of driveways?
Then we’ll take a closer look at how to calculate the cost of an asphalt driveway. Types of driveways include: asphalt. b rick.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
Is asphalt a good driveway material?
Asphalt is a common driveway material. It’s reasonably durable (20 years), relatively inexpensive (compared to concrete) and if you’re willing to invest in dressing it up with special surfaces, it can look really good.
What is crushed stone?
Crushed stone is similar to a gravel driveway. However, crushed stone usually has a larger bottom layer with crushed stone on top. This creates a smoother more uniform appearance. Crushed stone is available in many types, so you have a wide variety of choices.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
Is concrete more expensive than pavers?
Poured concrete is more common and less expensive. A concrete slab is poured and then allowed to dry. Designs can be stamped in the wet concrete, or color can be applied. A paver driveway offers a beautiful drive at a cost. It comes ready to install in individual pieces, similar to bricks, but made from concrete.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look. There are a few downsides to a gravel drive.
What questions should I ask a driveway contractor?
Questions to ask driveway contractors 1 Can you provide me examples or addresses of your previous driveway paving jobs? 2 Will you be using control joints or wooden expansion joints to minimize concrete cracking? 3 Are you licensed, insured, and bonded? 4 Does the estimate include all materials and labor fees? What additional costs can I expect? 5 What permits do I need, and will you obtain them? 6 How do you handle damages that happen on the job? 7 What does your warranty policy include? 8 What is your payment schedule?
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
Does a paved driveway increase the value of a house?
If most homes in the neighborhood have gravel driveways, a paved driveway sets a house apart, increasing its value. If other homes have paved driveways, replacing a gravel driveway with concrete or asphalt increases the value.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does a chip seal driveway cost?
Chip seal driveway. Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does it cost to widen a driveway?
Widening a driveway costs $3 to $12 per square foot , depending on the materials. Adding 200 square feet of driveway surface costs $600 to $2,400 on average. Minimum and maximum driveway widths may be subject to local zoning regulations.