Full Answer
How much does it cost to have a concrete driveway installed?
How much does it cost to pave a 500 foot driveway? Paving an asphalt driveway costs $4,743 on average, with a typical range between $2,935 and $6,563. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.
How much asphalt do I need for my driveway?
Asphalt driveway paving costs $2-$6 per square foot installed. For a 500 square foot (50 x 10) driveway this works out to an average cost of $2500 The typical cost of an asphalt driveway varies between $1,500 and $11,000.
What is the size of the driveway?
01/08/2018 · A DIY concrete driveway costs $2 to $3 per square foot for the concrete without stamping or staining, plus $200 to $500 for driveway materials such as concrete forms and wire mesh or rebar. Pouring a new concrete driveway is a complex job that requires special concrete tools and experience. Most homeowners are better off hiring a pro.
How much does asphalt cost per square foot?
9 rows · 27/10/2019 · Installing a new driveway costs between $1 and $20 per square foot depending on the type. A ...
What is the cheapest way to do a driveway?
Gravel and Stone Driveways A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.13-Jun-2018
How do you estimate a driveway?
Figure the Area's Total Square Footage Measure the length and width of the new driveway in feet. Multiply these two numbers together to find the total square footage of the area. For example, a 20- by 40-foot driveway has a total surface area of 800 square feet.
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt.
What type of driveway lasts the longest?
Concrete. Concrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.15-Jul-2016
How thick should a concrete driveway be?
four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
What is linear feet?
Technically, a linear foot is a measurement that is 12 inches long (so, one foot) and that is measured in a straight line, which is why it's called linear.23-Jul-2021
How many yards of concrete do I need for my driveway?
According to the table above, one cubic yard of concrete placed at a thickness of 5-inches covers 65 square feet. In a perfect universe, our 1,080 square foot driveway will need exactly 16.62 cubic yards of concrete (1,080 square feet / 65 square feet equals 16.62 cubic yards).
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
Is asphalt driveway cheaper than concrete?
An asphalt driveway is cheaper than a concrete driveway but doesn't last as long. Asphalt driveways cost $2 to $4 per square foot compared to $4 to $8 per square foot for concrete driveways. Asphalt is less durable, requires more maintenance, and isn't available in different colors or patterns.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does a circular driveway cost?
A circular concrete driveway costs $5 to $15 per square foot or 10% to 20% more than a rectangular driveway because it requires more labor to build curved forms and has a 15-foot minimum recommended width. Borders featuring stone or brick pavers cost $10 to $25 per square foot.
How much does it cost to seal a concrete driveway?
Concrete driveway sealing costs $0.50 to $2.50 per square foot, depending on the number of coats. Sealing it yourself costs $0.50 to $0.75 per square foot for materials. Sealers protect the driveway's surface and preserve its appearance.
How much does a driveway permit cost?
Concrete driveway permit. A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to build a 12x25 driveway?
A 12×25 (1-car) gravel driveway costs $300 to $900, and a 24×24 (2-car) driveway is $600 to $1,800. Costs depend on the size and depth, gravel type, soil conditions, labor, excavation, grading, permits, and optional grid stabilization.
How much does it cost to build a gravel road?
The average cost to build a gravel road is $4 to $12 per linear foot depending on the road width and depth, soil conditions, labor rates, and choice of materials. Building a long private gravel road leading up to your property costs $21,000 to $65,000 per mile.
How much does gravel cost per square foot?
White gravel shimmers in the light, and can cause a glare on sunny days. Black gravel driveway rocks from 0.50" to 1" in size cost $3 to $10 per square foot, $96 to $140 per cubic yard, or $76 to $85 per ton. Black lava rocks are the most common and affordable, while true-black granite chips are rare.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much does it cost to grade a gravel driveway?
The cost to grade a gravel driveway is $4 to $8 per square foot. An average driveway costs around $700 to $2,500 to excavate and grade.
How deep should a gravel driveway be?
A long-lasting gravel driveway should be a minimum 8" to 12" deep and made up of three 4" thick layers. Layer the gravel with 4" of fist-size gravel at the sub-base, 4" of golf-ball-size gravel for the middle layer, and a 4" deep surface layer of 0.75" gravel.
How much does it cost to install a new driveway?
Installing a new driveway costs between $1 and $20 per square foot depending on the type. A gravel driveway is the cheapest at $1.25 to $3 per square foot, an asphalt driveway costs $3 to $7 per square foot, and a concrete driveway costs $4 and $8 per square foot.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
Does a bigger driveway cost more?
A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
Does removing a driveway add to the cost of paving?
Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
Other considerations and costs
These prices are for service in the immediate service area of the provider.
DIY considerations
This project is not highly suitable for DIY requiring a special set of tools and skills.
Where is the Dawsonville driveway?
This driveway is a good representation of the majority of gravel drives. The home is in Dawsonville, Georgia. It is built on land that was once farmland, but only used for hunting in the last 20 years. Light woods had grown up that needed to be removed in the driveway path.
Is it cheaper to replace a gravel driveway with a concrete driveway?
That said, as with every type of driveway, the final price you pay will be dictated by the amount of preparation and work to be done. Replacing an existing gravel driveway will be much cheaper than removing an old concrete driveway before laying gravel.
How deep is a pea stone?
Middle layer: 2” to 3” stone is spread to a depth of 3-4 inches. Top layer: Road gravel, crushed stone or pea stone is spread to a depth of 2-3 inches. While pea stone is considered more attractive by some homeowners, it doesn’t stay in place as well as your other options.