To lock and unlock the dryer controls: Press and hold the Extended Tumble and - (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
- Locate the “End of Cycle Signal” button. This is located on the right side of the Duet model dryer.
- Push the button and hold it down for 3 seconds.
- The Control Lock LED should turn off letting you know that your dryer is no longer locked.
Do Whirlpool dryers have a reset button?
Whirlpool dryers do not have a reset button, however, there is still a way to reset it. When it comes to technology, Whirlpool has a lot of bells and whistles. There are a set of codes, that the machine will show, that could be potential problems. These error codes may call for you to reset the machine. PF error code.
How to fix a door switch on a whirlpool dryer?
How to Fix a Door Switch on a Whirlpool Dryer. Whirlpool front-loading dryers use a door-activated shutoff switch. When the door is closed, it pushes on the switch and enables the dryer to function.
How do you unlock control on Whirlpool washer?
Method 3 Method 3 of 3: Unlocking the Door Manually
- Power down the washer. Press and hold the Power button to turn off the machine. ...
- Seal off the faucet. After the washer is completely unplugged, close the water faucet that feeds into the machine.
- Get to the drain pump access door by unscrewing the cover. ...
- Tug on the plastic cord in the compartment to unlock the washer door. ...
How do I unlock my Whirlpool oven?
How do I unlock my Whirlpool wall oven? Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door. Subsequently, one may also ask, how do I unlock my oven? Disconnect power to range for 30 seconds.
How do I get the control lock off my Whirlpool dryer?
Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.
What does control locked mean on a Whirlpool dryer?
The dryers have a control lock feature, which prevents children from starting the dryer if they press the buttons on the control panel. The control panel is lockable whether the dryer is running or not, and when locked, all buttons are disabled.
How do you unlock a Whirlpool control lock?
To turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds.
Where is the control lock on Whirlpool dryer?
0:000:40Okay I just came in to turn on my dryer. And it says control loft it's the duet we wrap low. AndMoreOkay I just came in to turn on my dryer. And it says control loft it's the duet we wrap low. And hold for three seconds that's right there hold for three seconds to lock or unlock.
How do I turn off control lock?
0:031:12The control lock light will be illuminated if a key is pressed on the control the control lock lightMoreThe control lock light will be illuminated if a key is pressed on the control the control lock light will flash three times to alert you that the control is locked to turn off the control lock press.
How do you reset a Whirlpool dryer?
You can reset a Whirlpool dryer by pressing and holding the start button for a few seconds. This should start the reset automatically. If it doesn't you might have you work your way through some of the individual parts of the cycle until it finally will reset on its own.
What is dryer control lock?
Some models offer a control lock feature. You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.
How do you manually unlock a Whirlpool?
Hold down the "Control Lock" button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
Why is my Whirlpool washer stuck on lock?
The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it's supposed to.
How do I turn off the child lock on my dryer?
0:061:08And temp buttons at the same time for 3 seconds. Once the child lock is activated it will remainMoreAnd temp buttons at the same time for 3 seconds. Once the child lock is activated it will remain active even after the dryer is restarted to deactivate the lock press and hold the dryness.
How do I reset the control panel on my Whirlpool Duet dryer?
If your Whirlpool dryer displays a "PF" error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing "Start" for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press "Start" to begin.
How do I clear the LOC on my Whirlpool washer?
If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.
What is dryer control lock?
Some models offer a control lock feature. You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching buttons with this option selected.
Is there a reset button on a Whirlpool Duet dryer?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
How do I turn off the child lock on my dryer?
0:061:08And temp buttons at the same time for 3 seconds. Once the child lock is activated it will remainMoreAnd temp buttons at the same time for 3 seconds. Once the child lock is activated it will remain active even after the dryer is restarted to deactivate the lock press and hold the dryness.
Why does my Whirlpool washer say LoC?
There is no Error - Control Lock is activated If you try to push buttons, you may see the code "LoC" or "LC" (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.
Whirlpool duet dryer control locked reset
The Whirlpool dryer calypso touchpad stopped working. Two hundred bucks to fix plus labor.
Thermal fuse keeps blowing
My dryer blew the thermal fuse. I replaced it two times then replaced the thermistor. It worked one cycle, and the thermal fuse blew again. Whenever I vacuum my dryer, the thermal fuse always blows.
Coin tray lock on Whirlpool Dryer
You might have a commercial dryer too. If your tenants need to pay for the use of your machine, they might also need a key to open it. Did you ever notice that the keyhole is sometimes a little hard to insert a key?
The Abloy design on the control lock
Abloy locks are designed to resist lock bumping. Just take some Liquid Wrench or similar penetrant and try unscrewing the locks aggressively until they loosen.
Replace the control lock of the dryer
If you get the door out, you can replace it with a new one. The lock would not accept the key about two or more weeks ago. Since then, it has kept a “lockbox keyholder” in the next room over, which is mounted to the wall.