How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How do you calculate concrete driveway?
How to calculate concrete:
- Determine how thick you want the concrete
- Measure the length and width that you’d like to cover
- Multiply the length by the width to determine square footage
- Convert the thickness from inches to feet
- Multiply the thickness in feet by the square footage to determine cubic feet
- Convert cubic feet to cubic yards by multiplying by .037
How much does it cost to build a concrete driveway?
Whether you’re replacing or building a new driveway, the average concrete driveway cost is $3,000 nationally, with a range of $1,800 to $6,000. It’s a worthy investment to make since it protects...
How much does it cost to pour a concrete driveway?
To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944. Consult with a concrete slab professional.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
How much does a concrete driveway cost Australia?
The average cost for a concrete driveway per m2 in Australia is approximately $65. This price also includes the cost of materials and labour. However, the pricing range can go up to $195 per square metre, so for a concrete driveway area of 20m2 expect to pay between $1300 to $3900.
How much should I charge to pour a driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000, or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement, and removing the existing surface can all influence that range.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
How many square meters is a driveway?
Multiply the length and width numbers together to find the total square metres of the area. For example a 10m long and 4m wide driveway would be 40 square metres.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
How many square feet is the average driveway?
Size: The average 2-car driveway in the U.S. is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
Do concrete driveways need rebar?
The presence of rebar in a concrete project gives the final project considerably more strength than concrete alone. This strength is crucial for things like buildings, roads and driveways. Rebar is not necessary for every concrete project.
Do you need gravel under concrete driveway?
You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.
Do you need rebar for 4 inch slab?
No, rebar is not required for a 4-inch slab of concrete on grade. A 4-inch-thick slab cast on the ground and in constant touch with it will float, with no need for rebar. For concrete that is 5–6 inches thick, rebar is suggested. The thicker the slab, the more durable it will be.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does it cost to install a concrete driveway?
The average installation cost of a new concrete driveway is $7.65 per square foot, or $5,355 for a residential driveway that is 40 feet long and 16 feet wide, with a small parking pad at the area closest to your home or garage. When removal of old concrete or significant excavation is required, the cost will be higher.
How wide is a concrete driveway?
Concrete Cost Factors. Here are the most important factors affecting driveway cost. Driveway Size – In most communities, driveway must be a minimum of 12 feet wide for a single car driveway.
What are the enhancements to a driveway?
Enhancements & Extras – Enhancements include pigmenting, acid staining, embedding tile or stone and stamping the driveway to make it look like pavers or flagstone.
What is the easiest drive to install?
In general, cold climates require stronger concrete to withstand freezing and thawing cycles. Driveway Shape – Rectangular drives are the easiest to install. Those with turns and a turnaround bring slightly higher labor costs. Removal of Old Material – Asphalt is fairly easy to remove.
What are extras in a driveway?
Extras are items like flaring the driveway where it meets the road for easier entry and adding a turnaround to the side of the drive, so you can enter traffic forward. A list of enhancement costs is below. Time of Year – During the peak of the installation season, cost estimates will probably be higher.
What is the upside of removing a driveway?
The upside to removing a driveway is that its gravel and sand base can be used for the new drive, reducing material costs. Site Conditions and Excavating Requirements – The need for excavating varies widely based on the terrain and other site factors.
Is it easy to remove old asphalt?
Removal of Old Material – Asphalt is fairly easy to remove. Concrete removal is difficult and expensive, due to the use of jackhammers and the buried rebar holding it together. For either, you’ll also have disposal costs.
What is concrete mixed into?
Alternatively, in some factory settings, concrete is mixed into dryer forms to manufacture precast concrete products such as concrete walls. The process of concrete hardening once it has been placed is called curing, and is a slow process.
Why is concrete mixing important?
Proper mixing is essential for the production of strong , uniform concrete. It involves mixing water, aggregate, cement, and any desired additives. Production of concrete is time-sensitive, and the concrete must be placed before it hardens since it is usually prepared as a viscous fluid.
What is cement used for?
Cement is a substance that is used to bind materials, such as aggregate, by adhering to said materials, then hardening over time . While there are many types of cement, Portland cement is the most commonly used cement, and is an ingredient in concrete, mortar, and plasters.
Is concrete time sensitive?
Production of concrete is time-sensitive, and the concrete must be placed before it hardens since it is usually prepared as a viscous fluid. Some concretes are even designed to harden more quickly for applications that require rapid set time.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does a circular driveway cost?
A circular concrete driveway costs $5 to $15 per square foot or 10% to 20% more than a rectangular driveway because it requires more labor to build curved forms and has a 15-foot minimum recommended width. Borders featuring stone or brick pavers cost $10 to $25 per square foot.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.