How much does it cost to have a concrete driveway installed?
Concrete driveway cost A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
What is a concrete concrete driveway?
Concrete is an actual construction material made of cement, rocks, sand and water -- and it is useful for building driveways, walls and sidewalks. While you can mix only small batches of cement at a time, concrete can be mixed in very large or small quantities.
How much is a concrete driveway in MN?
A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Is a new concrete driveway worth it?
In almost every case, it's worth the investment. A new driveway can increase your home's value while improving the aesthetics of your house and your neighborhood. Learn more about the benefits of a concrete driveway and how it enhances your home's curb appeal.
Is a concrete driveway cheap?
Cost: Concrete driveways are often more expensive than other driveway alternatives, especially if there is a large area which needs covering. The only benefit is that maintenance costs will be low once installed.
What is the cheapest type of driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
Is it better to have a concrete or asphalt driveway?
Lifespan and Durability Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
What type of driveway is best?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
How long before you can drive on a new concrete driveway?
7 daysLeave the warning tape in place to let delivery vehicles and others know that they need to stay off your concrete. After One Week – After 7 days, it's OK to drive on your new concrete with normal passenger vehicles. Avoid driving near or across the edges of the driveway, though, since those areas are still weaker.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
What is the best maintenance free driveway?
Low-Maintenance Driveway OptionsPaving Stones. Paving stones are known to last up to a full century if properly laid. ... Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. ... Plastic Permeable Pavers.
Is it cheaper to slab or concrete?
In terms of cost, concrete slabs are generally less expensive upfront, but may incur more costs over time as it needs to be repaired or replaced. Stamped concrete and paving stones both have a higher upfront cost than slab concrete.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does a circular driveway cost?
A circular concrete driveway costs $5 to $15 per square foot or 10% to 20% more than a rectangular driveway because it requires more labor to build curved forms and has a 15-foot minimum recommended width. Borders featuring stone or brick pavers cost $10 to $25 per square foot.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
This Minneapolis Concrete Driveway Repair Estimate Does NOT Include
Any permits required for concrete driveway repair Minneapolis projects.
How long does concrete driveway repair in Minneapolis, MN take?
Concrete driveway repair can take hours or days to complete depending on the extent of damage that has occurred. Evaluated on a case-by-case scenario, a contractor determines the best course of action for fixing the concrete. It may involve breaking out the broken piece and replacing it with newly-poured concrete.
How much does the concrete driveway in Minneapolis cost?
Concrete driveway cost depends on the size of the driveway and the type of concrete finishing technique being used. Contractors create pricing estimates based on two things. The first is the supplies and materials used.
Is the concrete step repair difficult to complete?
It can be. It depends on how old the concrete is and how long the step has been broken. If it's a new break, it may be easier to fix than an older one that has more extensive damage. A damaged concrete step is typically broken out completely.
Average Driveways Cost in Minneapolis
We have done a little research to find the average cost of driveways in Minneapolis. Here are the average costs and prices reported back to us:
Minneapolis Driveways Cost Data
Professionals in the Minneapolis area have provided information about how much driveways cost (s). Here are some of the individual reports:
Minneapolis Driveway Contractors
Tell us how much you charge for your services and receive a free business listing.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.