Across Canada, homeowners report that ready–mix concrete costs about $108 per cubic yard. The average cost of a concrete slab (6 inches thick) is about $5.00-5.50 per square foot, including both materials and labor.
Full Answer
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How much does it cost to build a concrete driveway?
Whether you’re replacing or building a new driveway, the average concrete driveway cost is $3,000 nationally, with a range of $1,800 to $6,000. It’s a worthy investment to make since it protects...
What is the average price of a concrete driveway?
The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
How much does it cost to repair a cement driveway?
The cost to Repair Concrete starts at $9.75 - $11.54 per square foot, but can vary significantly with site conditions and options. Get fair costs for your SPECIFIC project requirements. See typical tasks and time to repair concrete, along with per unit costs and material requirements. See professionally prepared estimates for concrete repair work.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How do you estimate a concrete driveway?
How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•
How much does it cost to pave a driveway in Canada?
Asphalt / blacktop driveway Asphalt driveway paving costs $3 to $7 per square foot or $1,800 to $4,200 on average for a 600 square foot two-car driveway.
How much is a yard of concrete Canada?
Across Canada, homeowners report that ready–mix concrete costs about $108 per cubic yard.
How thick should driveway concrete be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How much does a driveway cost in Canada?
How Much Does It Cost to Repair a Driveway in Canada?Driveway Repair TaskAverage CostMaximum CostDriveway Cracks$738$2,000Driveway Replacement$9,898$20,000Oct 29, 2021
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How many yards are in a 24x24 concrete slab?
7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
Is it cheaper to mix your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. However, it is important to get the ratio right and to mix the concrete thoroughly.
How many yards of concrete can a truck hold?
Concrete trucks weigh an average of 25,000 lbs. by themselves and up to 40,000 lbs. when carrying a full load. Their capacity is around 8 cubic yards, but can be up to 10 cubic yards if fully-loaded.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How long does a concrete driveway last?
Concrete driveways are durable, stable and low maintenance. Unlike asphalt – which last only a maximum of 8 years, concrete can last for over 20 years with an added advantage that weeds will not grow on the paved area. Concrete is considered less expensive than interlocking stone.
Can concrete crack?
With the temperature’s fluctuation, concrete will crack, though stress lines are created to minimize these occurrences. In addition, since concrete is harder to remove, replacing or repairing partial areas is more challenging than interlocking pavers. Removal of Driveway. Installation of Concrete Driveway.
Is concrete cheaper than stone?
Concrete is considered less expensive than interlocking stone. The price of the concrete landscaping project is calculated based on a few factors. Since concrete is priced by square footage, the shape and size of the area will increase/decrease the cost.
Is concrete stain resistant?
Concrete is mixed in the truck and is stain resistant. A level up from brushed concrete is Exposed Aggregate Concrete which gives your driveway or backyard patio that added texture. Decorative, stamped or stained concrete are premium finishes that will bring the price higher.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does a circular driveway cost?
A circular concrete driveway costs $5 to $15 per square foot or 10% to 20% more than a rectangular driveway because it requires more labor to build curved forms and has a 15-foot minimum recommended width. Borders featuring stone or brick pavers cost $10 to $25 per square foot.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does concrete cost per square foot?
Across the US, homeowners report that ready – mix concrete costs about $98-99 per cubic yard.#N#The average cost of a concrete slab (6 inches thick) is $5.00-5.50 per square foot, including materials and labor. However, the price can go up to $9-10 per square foot depending on numerous factors and enhancement costs.
How much does a concrete overlay cost?
The average cost of this overlay starts at $3-5 per square foot, but can go up to as much as $12-15 per square foot depending on the complexity of colors and patterns you want.
How much does stamped concrete cost?
Costs for stamped concrete vary greatly; starting at around $8 per square foot, all the way up to $20+ per square foot. Most homeowners pay a mid-range price ...
What is the benefit of concrete pavement?
Another huge benefit is that concrete pavement requires minimal maintenance compared to other materials. To achieve a custom look, contractors use various types of colors such as stains and powered pigments, and combine them with an array of patterns and textures.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
How much does it cost to stamp a driveway?
A single-car driveway that’s 10 feet by 20 feet could cost $800 to $1,600, but a larger 24-foot by 24-foot driveway averages $2,300 to $4,600. If you choose to stamp decorative designs in the concrete, the costs will increase beyond those averages.