How much does a concrete driveway cost to build?
The cost of concrete driveway can range from $1,530 to $10,530 depending on the size of your site, type of finish and preparation work. On 18m2 plain concrete driveways, the price can be around $1,530 to $3,510 including materials and labour. Concrete driveways are more durable and versatile compared to other types.
How to find a good concrete contractor?
Other benefits to selecting concrete repair over a complete replacement include:
- Leveling is considered more environmentally friendly since the original concrete is being repurposed instead of thrown away.
- The total time of the repair is shorter than the time it takes to remove and install a new section.
- The concrete will continue to match in color. A new section of concrete will stand out in appearance.
What can driveway grading contractors do for your driveway?
They will use the best equipment to accurately get your driveway to the right grade level. If you have a driveway that is uneven, has potholes, and/or gets pools of water then contacting a driveway grading contractor may be a good idea to regrade the surface. How do you regrade a driveway? Well, let’s first look at the type of driveway you have.
What are my options for repairing a concrete driveway?
- Many concrete crack fillers, sometimes called masonry crack fillers, are designed for cracks up to 1/4-inch wide. ...
- The use of a concrete backer rod is recommended for cracks wider than 1/4-inch, since these cracks are usually deep. ...
- Before you apply the new filler, break up any old concrete patch materials with a hammer or masonry chisel .
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
Is a concrete driveway a good investment?
The combined strength and longevity make concrete a relatively good value for large areas of paving. As a driveway surface, concrete is more expensive than gravel and asphalt, but it is considerably less expensive than a driveway made with brick, cobblestone, or concrete pavers—and it typically outlasts all of these.
How much should I charge to pour a driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000, or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement, and removing the existing surface can all influence that range.
How much does a concrete driveway cost UK?
The size of a typical driveway in the UK ranges from about 5.5m2 for a 1 car space up to 21m2 for a good–sized 2 car space. The average cost of a laying a concrete driveway lies somewhere around £50/m2 with labour costing between £200 and £450 per day depending on the complexity of the work.
Does a new concrete driveway increase home value?
“A [concrete] driveway can increase your property's value between 5 and 10 percent” says Fast Sales Homes. That means “a $500,000 home can increase to a $550,000 home.” On average, a new 2-car concrete driveway costs anywhere from $3-$6,000, which makes this type of an investment pretty significant.
Do you need to put rebar in concrete driveway?
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
Do all concrete driveways crack?
In theory, concrete that is formulated correctly for its use and placed on a well compacted, well engineered base, and finished perfectly, should never crack. But that rarely happens. So concrete usually cracks. That fact is the reason concrete contractors put "control" joints in large slabs of the material.
What is the cheapest driveway option?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
How long does it take to build a concrete driveway?
1-3 daysTypical concrete projects for residential use normally take 1-3 days.
How much does a driveway add to property value?
You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property's value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.
Why do concrete driveways crack?
Concrete is made up of cement and water. As the concrete hardens and the water evaporates, the concrete shrinks. Too much water will lead to too much shrinkage, causing the concrete to crack. That's why concrete cracks are frequently seen within the first 30 days.
What is concrete contractor?
A concrete contractor provides general concrete services and oversees the construction or repairs of concrete-related projects. Such projects include (but are not limited to) walls, steps, foundations, sidewalks, driveways, and roads. A concrete contractor can work on projects both residential and commercial.
What is concrete leveling?
Concrete leveling is used to fix uneven surfaces. This type of concrete repair is also referred to as mud jacking, slab jacking, and pressure grouting. The process consists or drilling small holes, adding to the area underneath until the section is level, then repairing the small holes.
What causes cracks in concrete?
Even the most carefully laid concrete is subject to environmental factors that can cause damage. Many concrete crack repairs are purely cosmetic. However, some factors beyond control can create structural damage or other dangerous situations. Concrete repairs are typically required after one of the following occurs: 1 Water gets into an existing crack and freezes, furthering the severity of the crack. 2 Air pockets were formed during a rushed installation. 3 Poor ground structure: Concrete that was laid in an area that is not deep enough, without steel reinforcement, or on frozen, uneven, or eroded ground will show signs of cracks and other damage quickly. 4 The cement dried too fast, creating shrinkage and crumbling. 5 Improper ratio of water to cement was used when pouring. Excess water in the mix will create shrinkage. 6 Natural forces such as tree roots, continuous harsh weather, or earthquakes disturbed the ground.
What causes concrete to shrink?
Excess water in the mix will create shrinkage. Natural forces such as tree roots, continuous harsh weather, or earthquakes disturbed the ground. After cracks and other damages become apparent, a certified concrete contractor will be able to assess the damage and offer repair solutions.
Is leveling concrete always the best option?
Leveling is not always the best option. If the surface is uneven by more than two inches or if structural damage is detected, a replacement may be the right solution. Contact a certified concrete contractor to assess all of your options before deciding on a solution.
Can concrete cracks be cosmetic?
Even the most carefully laid concrete is subject to environmental factors that can cause damage. Many concrete crack repairs are purely cosmetic. However, some factors beyond control can create structural damage or other dangerous situations. Concrete repairs are typically required after one of the following occurs:
Is leveling concrete more environmentally friendly?
Leveling is considered more environmentally friendly since the original concrete is being repurposed instead of thrown away. The total time of the repair is shorter than the time it takes to remove and install a new section. The concrete will continue to match in color.
How do I find a contractor for a driveway?
Other ways to hunt down a contractor: 1 Look at decorative concrete driveways in your neighborhood and get the names of the contractors who installed the driveways that appeal to you most. Be sure to ask the homeowners about their experience with the contractor and the quality of the workmanship. 2 Get references from friends, homebuilders or local ready-mix suppliers. 3 Get names through your local Yellow Pages.
How long does a concrete driveway last?
A properly installed concrete driveway should last for many decades-and at least two or three times longer than an asphalt driveway. Because concrete driveways don't need to be replaced or resurfaced as often, fewer raw materials are consumed over the life of the pavement.
Why seal concrete?
The sealer helps protect the concrete from moisture absorption, exposure to chemicals, and grease and oil stains. On decorative colored concrete, a sealer will also help enhance the color (see Why Seal Decorative Concrete ).
What type of sealer should I use on exterior concrete?
Generally, there are two categories of sealers for exterior concrete: film-formers and penetrants . Penetrating sealers tend to offer the best protection from moisture absorption. Regardless of the sealer you use, be sure it's applied according to the manufacturer's instructions.
What is concrete made of?
Unlike asphalt pavements that are made with nonrenewable petroleum supplies, concrete pavements are made from abundant, sustainable resources including water, natural rock and sand, and cement. The predominant raw material for the cement in concrete is limestone, the most abundant mineral on earth.
What is used to replace cement?
Fly ash, ground blast furnace slag and silica fume-all byproducts from power plants, steel mills and other industrial processes-are commonly used as partial cement replacements. You can also use recycled aggregates in the concrete mix and reinforcing steel that has a high recycled content.
Can I get a warranty on concrete in Michigan?
Yes! Many contractors will warrant their work, and you may be able to obtain an extended warranty ( three years or longer) through your state concrete association, such as the Six Star Driveway Program available from the Michigan Concrete Association.