Sometimes you can fix a StabiliTrak with a simple power cycle. Start by pulling over, and turning your Chevy off. Let it sit for a minimum of 15 seconds. If the message is gone when you turn the car back on, then you are good to go, otherwise you should seek service.
Full Answer
What does it mean when my equinox says Service StabiliTrak?
stabilitrak, cruise, am/fm cd player, power seat, pwr windows/locks, daytime running lamps. It rides close in comfort to my wifes 2013 Malibu. We upgraded the oem stereo and speakers last year for ...
How do you check transmission fluid on Chevy Equinox?
Your Chevy Equinox’s transmission fluid is a hydraulic fluid, and has three main jobs:
- Lubricant – Just like motor oil it keeps the many complex mechanical parts inside of a transmission from wearing out.
- Coolant – Here it does the same job as antifreeze going through a motor. It either makes
- Transfers Power – ATF transfers power from kinetic energy into hydraulic energy and back again through the torque converter. ...
How to service Chevy Equinox transmission fluid?
Transmission Fluid Level Check Chevrolet Equinox (2018-2019)
- Getting Started - Prepare for the repair
- Open the Hood - How to pop the hood and prop it open
- Remove Dipstick - Access point for transmission fluid
- Add Fluid - Determine correct fluid type and add fluid
- Replace Dipstick - Put the dipstick / cap back in place
- More Info. - Additional information on checking trans. fluid levels
How reliable is Chevrolet Equinox?
The Chevrolet Equinox Reliability Rating is 3.5 out of 5.0, which ranks it 23rd out of 26 for compact SUVs. The average annual repair cost is $537 which means it has lower than average ownership costs. While repairs tend to be more severe than average, these issues occur less often, so major repairs are infrequent for the Equinox.
What does it mean when a Chevy Equinox says service StabiliTrak?
If you have a service StabiliTrak warning, your Equinox will no longer be assisted when a loss in lateral traction is detected. StabiliTrak is a GM specific vehicle stability system. It just means that StabiliTrak is not currently able to initialize.26-Apr-2020
How much does it cost to fix a StabiliTrak?
How Much Does It Cost to Fix the StabiliTrak? Replacing the traction control system, or StabiliTrak, on a car typically costs between $80 and $190. This price includes labor costs, which can range from $30 to $50, depending on the manufacturer. At the same time, the cost of this work ranges from $20 to $40 per part.
How do you turn off the service StabiliTrak on a Chevy Equinox?
1:382:38Chevy Equinox Eco, Traction Control and Stabilitrak Systems - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf I press and hold it for 10 seconds. Then it will actually disengage.MoreIf I press and hold it for 10 seconds. Then it will actually disengage.
Can I drive with service StabiliTrak?
You are absolutely fine to drive the vehicle. Just know these devices to help control the vehicle in a sliding situation are off, and you will need to drive accordingly if in certain conditions. The best option is to have a technician look at the system.04-Nov-2016
What can cause StabiliTrak warning light to come on?
When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack.26-Jan-2017
How long does it take to fix StabiliTrak?
For more complicated problems with the StabiliTrak system, it may cost up to $500 to fix. The time it will take to fix the issue will depend on your dealer or local mechanic. However, one would expect the process to take at least an hour, while a full diagnosis could take between 3-5 hours.11-Nov-2021
Does StabiliTrak affect transmission?
Why the transmission hard shifts with stabilitrak issues is still unknown. With that being said, driving while hard shifting can cause serious wear and tear on your transmission and is not recommended.
Does StabiliTrak cause engine light to come on?
It is not uncommon for service StabiliTrak to come on along with the check engine light.
How do you fix stability control?
All you need to do is drive the car for a few minutes and make sure to make several left and right turn. Once the system does a self-check, it should reset the stability light on its own.12-Dec-2019
Is StabiliTrak covered under warranty?
Registered. Read the warranty, the powertrain warranty is pretty much internal engine, transmission, transfer-case, and axle components. Stabilitrak is not covered.24-Dec-2017
Why does my car say service traction control?
The traction-control light is usually a sign that your vehicle is working properly by maintaining traction on a slippery road, but it can also mean that your car has some damaged sensors or wires. Keep yourself safe on the road by taking your vehicle to a trusted auto repair shop at the first sign of trouble.06-May-2021
What does Stabilitrak do on a Chevy?
Stabilitrak is connected to your Chevy’s stability control system, your wheels and steering wheel via sensors, and to your brakes.
How does Stabilitrak work?
The system uses sensors to determine the position of the steering wheel and tires compared to the direction the car is moving. If you are on a slippery road and begin to fishtail, Stabilitrak will kick-in to help correct your path.
What happens when traction control is turned off?
Once traction control is turned off, the transmission beings to shift very hard and rough. Additionally, the warning light most commonly appears in cold temperatures. Loss of engine power and or limp mode are also symptoms in addition to very hard shifting. While not isolated to these engines, the problem is most common in 2007-2013 trucks with ...
What causes hard shifting in a transmission?
Hard shifting usually occurs from low transmission fluid, which means the metal components inside the transmission are rubbing on each other with a lot of friction. However, in the service stabilitrak situation, it generally has nothing to do with low fluid levels.
What is Chevy StabiliTrak?
Traction control, for example, aids in gaining traction in low-traction conditions like snow and ice. Stabilitrak is another “electronic stability control” system; however, it’s not the same as traction control. Traction control will restrict power to different wheels when there is poor grip on the road to assist your Chevy in starting from a stop.
What to do about a Service StabiliTrak message?
An error message indicates that there is a problem. A basic power cycle may sometimes resolve a StabiliTrak issue. To begin, pull over to the side of the road and switch off your Chevy. Please allow it to sit for at least 15 seconds.
What Causes the Service Stabilitrak Light?
This warning light can be caused by various engines and other problems, although the system is connected to steering, braking, and traction. A few difficulties, in general, have caused service Stabilitrak. And it appears that the proper fix varies greatly depending on the car.
How to Fix Chevy Service StabiliTrak?
On the instrument panel, the Stabilitrak caution light typically illuminates. It could be because of a software-based failure that you can overcome using the Stabilitrak button or following the method above for your vehicle, or because of a fault with the system that must be addressed.
Can I Keep Driving with the Stabilitrak Light On?
You may notice that your car behaves differently than usual when the StabilitTrack or stability control system is turned off, particularly while braking on slick terrain. When braking, the vehicle may slide, particularly on wet roads, or it may fail to correct itself and if you lose traction when turning.
Conclusion
The vehicle’s service StabiliTrak Chevy alerts are a method of informing you that it needs maintenance. As a primary safety feature, StabiliTrak technology minimizes wheel slippage and accidents on rough roads.
What is Stabilitrak?
Stabilitrak helps you drive in a straight line by monitoring and adjusting the steering, braking, and traction of your vehicle.
How to Know if You Have a Problem with Stabilitrak
If you have problems with your Stabilitrak system, it can be a symptom of several different issues. When it’s not functioning properly, you might notice a difference in the way your vehicle shifts gears, or you may find that your vehicle has lost power.
Servicing Stabilitrak
When you take your Equinox in to a service center to have the Stabilitrak system check out, there are a few places the technicians will look to diagnose the problem. Since Stabilitrak works with so many other systems across the vehicle, they will want to evaluate several systems to find the cause.
Schedule Stabilitrak Service Soon
If you’re having an issue with the Stabilitrak system, contact the Feldman Chevrolet of Lansing Service Center. Our team will work hard to identify the problem and get your Chevy Equinox back on those Lansing, Michigan, roads with a smooth ride.
What is StabiliTrak?
GM patented its own electronic stability control (ESC) system, known as StabiliTrak. This ESC system is designed to stop wheels from slipping during low-traction situations.
Possible Causes of Service StabiliTrak Light
The StabiliTrak system runs through the traction control system, brake components and steering wheel. However, there are aspects beyond these systems that could cause the malfunction. If you see the Service StabiliTrak light on the dashboard, the problem could be related to one of these components.
Reset Service StabiliTrak Light
If the Service StabiliTrak light has come on the dashboard, you should take heed that there’s something wrong with the system. There could be a computer failure or software malfunction turning the system off.
Can I Keep Driving with the StabiliTrak Light On?
If you’ve chosen to turn StabiliTrak off, then there’s nothing wrong with the system and you are free to drive as needed. Just be aware that having the system disabled means that there will be no traction control, meaning that you could notice the tires spinning and skidding in slippery situations. Drive accordingly to prevent any accidents.
How to turn off traction control on a StabiliTrak?
The methods may vary depending on the model. For some models, you must first press the traction control button and turn off the StabiliTrak. Afterward, release the button immediately. Then, hold down the control button for a moment to turn off the traction control.
How does StabiliTrak work?
StabiliTrak detects the attempt, applies the brakes to whichever wheels need it, and the car stops slipping. In Chevrolet cars, StabiliTrak responds to oversteering by applying the brakes to each wheel individually, if necessary. StabiliTrak then utilizes the outer front brake to bring your car back on track.
Why does my StabiliTrak initialize?
This is often because your vehicle’s StabiliTrak system was not currently able to initialize. Reasons may vary, ranging from improper tire size to road conditions.
What does service stalitrak mean?
The Service StabiliTrak notification indicates an error with the StabiliTrak System, a type of traction control present in all cars as a standard safety measure. Possible causes include the following:
What does StabiliTrak do?
For instance, GM’s StabiliTrak uses the brakes to stop the wheel slip and change the vehicle’s entire trajectory. It can even identify when the driver exactly lost control of the vehicle.
Where is the Stabilitrak sensor located?
To find the Stabilitrak sensor location: Go to the car’s menu, and check the steering wheel controls under the instrument panel;
How much does it cost to replace traction control?
Should you wish to replace your vehicle’s traction control or StabiliTrak, the average cost ranges from $80 to $90. This includes labor costs, which may be around $30 to $50, depending on your location and car dealer. Parts, on the other hand, may range from $20-$40.
What Is The StabiliTrak System?
General Motors is responsible for coming up with the term. It’s another fancy name for the Stability Control System.
What Does The Service StabiliTrak Message Mean?
If something is wrong with your vehicle’s Electronic Brake Control Module, the Service StabiliTrak Light will appear. Credit: chevytrucks.org
Symptoms of Service StabiliTrak
Below are some of the symptoms that accompany the Service StabiliTrak message.
How To Reset The Service StabiliTrak Yourself Without A Scan Tool?
System problems are tricky. What might seem like a small problem can snowball into a catastrophe. You should never ignore the Service StabiliTrak Warning.
How To Reset The Service StabiliTrak with a Scan Tool?
Some sources suggest it’s possible to reset the Service StabiliTrak System at home without the help of a professional. Honestly, I am against it.
Causes Of The Service StabiliTrak Message
The Service StabiliTrak message is a system problem. Therefore, there are a lot of suspects that might be responsible (From the steering wheeling to the brakes). Below are some of the most notorious.
Conclusion
Just like any other warning message, you should never ignore the Service StabiliTrak. It’s a sure sign something is wrong with your vehicle’s Stability Control System. If you’re not careful, it can snowball into a catastrophe. Immediately consult your auto mechanics and have them fix the problem.