- Plug the power cord on the Ryobi battery charger into the power outlet.
- Insert either a Ryobi Lithium-ion or Nickel-cadmium 18-volt battery pack into the charger.
- Press down on the battery to ensure the contacts engage with each other.
- Allow the battery pack to charge.
- Look at the LED light.
Full Answer
How to remove a Ryobi battery from the Charger?
- Plug the power cord on the Ryobi battery charger into the power outlet.
- Insert either a Ryobi Lithium-ion or Nickel-cadmium 18-volt battery pack into the charger.
- Press down on the battery to ensure the contacts engage with each other.
- Allow the battery pack to charge.
- Look at the LED light.
How do you fix a Ryobi 40V battery charger?
The Fix Option 3:
- Connect you charger to the power outlet.
- Place the battery in the charger until the green indicator goes solid.
- Just before the red/green lights start flashing, remove the battery from the charger.
- Re-insert the battery into the charger again and repeat steps 2-3.
How to repair Ryobi lithium battery?
Ryobi batteries, like other lithium-ion bats, have been known to have their issues. Thankfully, many are fixable without paying an extra dollar. The most common problem is the Ryobi battery gets stuck in sleep mode. This can be fixed by ‘mini-charges’ – slot the defective battery into the charger for a few seconds, then remove before the ...
Does Home Depot warranty Ryobi batteries?
Your RYOBI battery is covered under a three year limited warranty. If a battery comes in a kit (with the tool and charger), no receipt is required. Call customer service (1-800-860-4050) with any battery issues and they will be able to assist or direct you to the closest service center. Furthermore, does Home Depot warranty Ryobi tools? 3 Year Warranty - RYOBI - Tools - The Home Depot.
How long does it take to charge a Ryobi battery for the first time?
If you've made the shift to Ryobi's ONE+ battery system, then the 18V ONE+ 1.5A Charger will be a handy addition to your collection. Charge time will vary from 55 minutes (1.3Ah battery) through to 3 hours 20 minutes (5Ah battery) depending on the type and power of your battery.
Do new Ryobi batteries need to be charged?
All Ryobi batteries are shipped with low charge levels, so they should be charged fully before inserting the battery in a tool. The Ryobi charger is designed to charge only lithium-ion and nickel-cadmium batteries.
How long does it take to charge a Ryobi 40V battery the first time?
1-hourRead 113 Reviews Same page link. RYOBI introduces the 40-Volt Lithium-Ion Rapid Charger. On average, this charger charges 40V batteries in 1-hour or less. The indicator lights provide the battery charging status and even lets you know if the battery is too hot or too cold to charge.
How do I know when my Ryobi battery is fully charged?
0:000:47How to tell if your Ryobi 40 V Battery is fully charged - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you plug this in you're going to see this. Red then we're going to slide it on here and it'sMoreOnce you plug this in you're going to see this. Red then we're going to slide it on here and it's got this thing that it clips on and then we're just going to go ahead clipper on you're going to see
Can you overcharge a Ryobi battery?
Keep battery from overheating. Don't Leave Battery on Charger: Unless your tool instructions specifically say to store the battery on the charger, be sure to remove it after charging is complete. Overcharging can damage a battery and shorten its life, and not all chargers shut off automatically.
Why is my Ryobi battery flashing green?
It's to indicate that your battery is either too hot or too cold. If your battery is too hot or too cold, it won't start charging until it reaches an appropriate temperature. At which point, it should start flashing GREEN.
Why is my Ryobi battery charger blinking red and green?
The most common cause for your Ryobi Charger showing flashing red and green lights is that the battery has been over-discharged.
Why is my Ryobi battery charger blinking red?
Red Light Flashing Battery pack is either too hot, too cold or deeply discharged. This is NOT a fault condition. Wait for the charger to evaluate the battery condition. Once the battery pack reaches correct temperature or completes a precharge cycle the charger will begin charging mode.
How long does a Ryobi 36V battery take to charge?
Get back to your gardening or DIY project faster with a RYOBI 36V 6A Fast Charger – compatible with all RYOBI 36V batteries. This fast charger can charge a 2.0Ah battery in 25 minutes, a 4.0Ah battery in 45 minutes, and a 6.0Ah battery in 70 minutes (charging times may vary depending on...
Why do Ryobi batteries take so long to charge?
0:532:17How Long Do Ryobi Batteries Take To Charge? - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr as this mijita battery charges in 30 minutes and it's a 3 amp hour battery. So 10 minutes per ampMoreOr as this mijita battery charges in 30 minutes and it's a 3 amp hour battery. So 10 minutes per amp hour which makes it twice as fast as charging it as the Rio P batteries.
What does solid red light on Ryobi charger mean?
When you plug in the battery charger without a battery pack, you should see a solid RED light. This simply indicates that the charger is receiving power and is ready to charge a Ryobi battery.
How do I know if my Ryobi charger is working?
Basically, you put the battery on the charger, count to 2 or 3, and then remove the battery. You do this for up to thirty minutes, or until you see the flashing GREEN light, indicating it's charging normally. Think of it like battery CPR. Only the battery isn't dead dead.
How long does it take for a Ryobi drill to charge?
Similarly, it is asked, how long does it take for a Ryobi drill battery to charge? After approx. 8-10 hours of charging, the battery will be fully charged. After a few lines, it says: After normal use, ...
How long does a Ryobi battery last?
90 minutes. How long does Ryobi battery last? Ryobi claims that one of these batteries can last longer than 6,000 AA batteries. ? This is a lithium ion battery and will have that "fade free" power that other lithium ion batteries offer.
Replacement Batteries and Chargers
To replace a battery that is still under warranty, please contact our customer service at 877-655-5250. To expedite the process please have the battery in question as well as a compatible tool and charger. For replacement of 4V, 18V, 24V, and 40V batteries that are not under warranty, please visit The Home Depot.
Battery Recycling
What do you do with a battery once it is ready for disposal? Watch the video and find out. For more information visit www.call2recycle.org
Battery Safety
Want to learn more about battery safety? Visit www.takechargeofyourbattery.com for advice on owning and maintaining your batteries.
How long does it take to charge a Ryobi battery?
Most Ryobi charging devices charge at 1 amp. A dead-flat battery with a 1.5 amp hour rating will take about 1.5 hours to recharge, whereas a dead flat 5 amps battery will take 5 hours to recharge.
What is a Ryobi 18V battery?
Ryobi 18v batteries are an excellent option for those with an electric power tool who want to save money. These batteries are affordable and long-lasting, but it's important to know how they charge before purchasing one.
Why remove battery from charger?
It is important to remove the battery from a charger once it has been charged. This will prevent damage and give your batteries longer lives. Not all chargers have automatic shutdowns, which means you should be constantly monitoring them when they are charging something as small as a tool's battery or large, like an electric car 's entire power supply.
Can you use a Ryobi 18V battery charger?
It's recommended that a Ryobi 18v battery and charger are used exclusively by one user, as this will allow the power tool to reach its optimum performance. Each time you switch from one tool to another, it takes a while for the power tool's circuitry to adapt to new settings.
Can you leave a lithium battery on the charger?
If you want to ensure that your battery is in good condition, remember not to leave it on the charger for too long. The overcharging of lithium batteries may cause serious safety problems such as irreparable cell damage and the risk of fire. This may also cause damage and shorten its lifespan, so make sure your chargers auto shut off if they are unable to do this manually.
How long does it take for a Ryobi battery to charge?
How long does a Ryobi 18v battery take to charge? Charge time will vary from 55 minutes (1.3Ah battery) through to 3 hours 20 minutes (5Ah battery) depending on the type and power of your battery. In this regard, how long does a 18v battery take to charge?
What kind of battery should I use for a Ryobi charger?
Insert either a Ryobi Lithium-ion or Ni ckel-cadmium 18-volt battery pack into the charger.
Does Ryobi battery drain?
Unlike its NiCad cousins, this lithium ion battery will not drain when not in use, so you don't have to keep it constantly charging. Simply plug it into your tools when you need it, and rest assured in its reliability. Remember, Ryobi means power done right.
How to charge Ryobi battery pack?
Charging a battery pack with the Ryobi BCL1418H Charger. 1. Connect the charger to the power supply. 2. Place the battery pack in the charger aligning raised rib on the battery pack with the groove in the charger. 3.
What to do if battery charges are different?
If a different battery charges normally, dispose of the defective battery pack.
Why is my battery flashing red?
Red Light Flashing. Battery pack is either too hot, too cold or deeply discharged. This is NOT a fault condition. Wait for the charger to evaluate the battery condition. Once the battery pack reaches correct temperature or completes a precharge cycle the charger will begin charging mode.
What temperature should a battery charger be placed at?
NOTE: The charger and battery pack should be placed in a location where the temperature is more than 10°C but less than 38°C.
How long should you let a battery pack cool down?
When using a tool continuously, the batteries in the battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.
Is it normal for a battery pack to be warm?
The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem. 5. Do not place the charger and battery pack in an area of extreme heat or cold. They will work best at normal room temperature.
How to charge Ryobi battery?
Insert either a Ryobi Lithium-ion or Nickel-cadmium 18-volt battery pack into the charger. Align the raised rib side of the battery with the groove in the charger. The contacts on the battery pack must face the contacts on the charger. Make sure the latches on each side of the battery pack snap into place and the battery is secure in the charger.
What is a Ryobi charger?
The Ryobi charger is designed to charge only lithium-ion and nickel-cadmium batteries. In addition, those batteries must be Ryobi batteries. The charger will plug into any outlet that is of normal household voltage, or 120 volts. The charger comes with two LED lights that indicate the state of the battery and its charge level.
Does Hunker charge Ryobi batteries?
By Si Kingston. Hunker may earn compensation through affiliate links in this story. All Ryobi batteries are shipped with low charge levels, so they should be charged fully before inserting the battery in a tool. The Ryobi charger is designed to charge only lithium-ion and nickel-cadmium batteries. In addition, those batteries must be Ryobi ...