OxiClean
OxiClean is a line of household cleaners, including OxiClean Versatile Stain Remover, which is a laundry additive, spot stain remover, and household cleaner marketed by Church & Dwight. It was owned by Orange Glo International until 2006.
How do you use OxiClean in the bathroom?
Toilet, Tub & Tiles (Concentrate) OxiClean really nails it in the bathroom. Whip up your concentrate solution and apply liberally to affected areas. I often use it on grout lines and around the area where the toilet meets the floor.
What is OxiClean and is it safe?
OxiClean was developed in 1992, and since then has made its way into household laundry arsenals all over the world. While the ubiquitous cleaner can be used in many more applications than just laundry, OxiClean isn’t a cure-all. Here are some things you shouldn’t do with your beloved oxygen stain-buster:
Can you use OxiClean on cardboard?
Transfer it from the cardboard if you have to. OxiClean can lift stains from carpets and upholstery, but it can work a little too well. If you’re spot cleaning a generally dirty carpet or upholstered piece, the area you cleaned could end up looking different than the surrounding area.
What is OxiClean laundry cleaner?
OxiClean was developed in 1992, and since then has made its way into household laundry arsenals all over the world. While the ubiquitous cleaner can be used in many more applications than just laundry, OxiClean isn’t a cure-all.
How to get rid of odors in recycling bins?
I simply fille up the buckets with a scoop of OxiClean and fill it with water. This one was super easy because I can allow everything to happen right in the bins themselves. After about 10 minutes I scrub all the crevices with a cleaning toothbrush to get up any of those set in stains or other grime that may have lodged itself in there. This particular application also gets rid of odors, which is amazing because these bins really tend to reek.
How to get rid of soap scum on shower curtain?
You can easily get rid of that soap scum, mildew, or even that pinky orange stuff with a simple OxiClean soak. Simply remove the liner, create the soak solution in your tub, and toss the curtain in. Let the liner soak for 10 to 15 minutes then glove up and gently rub the curtain together removing any stubborn stains.
How to clean greasy exhaust filter?
To clean your greasy overhead exhaust filters just boil up a kettle full of water and add your scoop of OxiClean to a bucket. You’re going to put a gallon of hot water in here and mix well. Take out your filter from the overhead exhaust compartment and just dunk it into the bucket filled with the solution. Leave it for 5 minutes and then flip it ...
How long does it take for a concentrate to work on kitchen tile?
Just apply the concentrate to the grout lines and let it sit for 15 minutes. Generally, you don’t even need to scrub it.
Can you mix up cleaning solutions on demand?
Mix up your solutions on demand—make just enough for what you’re cleaning, don’t store it for later use.
When was Oxiclean invented?
Credit: Joe Lingeman. OxiClean was developed in 1992, and since then has made its way into household laundry arsenals all over the world. While the ubiquitous cleaner can be used in many more applications than just laundry, OxiClean isn’t a cure-all.
How long can Oxiclean be mixed?
According to the product page on Amazon: “Do not store solutions for more than 6 hours , as pressure can build up and the container may rupture, causing injury.”
Does Oxygen remove rust?
Oxygen is a major ingredient in OxiClean, and an essential contributor to rust. Better to go with a product like Whink Rust Stain Remover to clean rust from metals and rust stains from fabrics. Save Pin It See More Images. Credit: Sarah Crowley/Apartment Therapy.
Can you mix bleach and ammonia?
This includes ammonia, chlorine bleach, and other household chemicals. Good advice when it comes to mixing any cleaning chemicals: If you’re not 100 percent sure they can be mixed— as in, the label on the container says it’s OK—don’t mix.
Can you scoop oxyclean powder?
If moisture gets into your container of OxiClean, you’ll end up with a brick of powder, which is definitely not conducive to being scooped. This is especially common when you’re storing OxiClean that came packaged in a cardboard box. To avoid the hassle of having to break your OxiClean up into a usable form, be sure to store it in a sealed container. Transfer it from the cardboard if you have to.
How to clean a toilet with a wet brush?
As a last step, clean your supplies. Prop the wet toilet brush under the seat cover and pour bleach or cleaning solution over its business end, into the toilet bowl. Let sit for a minute, then rinse with a pitcher of water. Clean the brush's canister by filling it with warm, soapy water; you can dump it right in the toilet, too. Resist the urge to stick the damp brush back in the canister and be done with it, suggests Maker. Instead, you want to let the brush air out completely before putting it away, to ensure you're not encouraging bacteria growth.
How to clean a toilet bowl with pumice?
Don't worry, as the pumice is a softer stone, it won't scratch the porcelain surface. Turn the toilet's water back on, then flush to rinse the bowl.
What to use to clean rusty toilet bowl?
For those difficult toilet bowl stains, grab a stiff-bristled toilet brush to scrub the bowl's interior and under the rim. If you notice a rust-colored ring inside the bowl, the culprit is likely minerals in your water system. Cleaning experts agree the surefire way to attack such stains is with a pumice stone.
How long does it take for toilet cleaner to work?
Whichever toilet bowl cleaner you prefer, use generously and remember to apply some under the bowl's rim. Then, while you're waiting five to ten minutes for those suds to fully work, turn your attention back to the toilet's exterior.
How to clean gloves before going to the toilet?
But before you do, head for the sink and give your gloved hands a good scrubbing with soap and hot water. "It's the best way to make sure you don't get your hands dirty and get every inch of the gloves clean," says Maker.
Can you use milder cleaner to clean toilets?
She recommends draining the water out of the toilet before applying the cleaning solution. "If you get the water out of toilet, you can use a milder cleaner with the same squeaky-clean results," she adds. Plus, you get a better clean with less work.
Can you spray the walls behind a toilet?
Also spray the walls behind and beside the toilet. A University of Arizona microbiologist found that with each flush, bathroom particles can launch into the air before settling onto nearby surfaces. That makes the floor and walls around the toilet prime spots for microscopic splatter.
How to remove a ring from a toilet bowl?
To use white vinegar, turn off the water to the toilet and flush it , leaving only a little water in the bowl. Carefully pour enough white vinegar into the bowl to cover the ring and let stand overnight. Finally, with the vinegar still in the bowl, scrub vigorously with a toilet brush. Some people claim to be able to remove rings by adding ...
Why do toilets have rings?
A: Toilet rings are generally caused by mineral deposits from hard water. There are literally dozens of treatments for removing them, ranging from white vinegar and various chemical cleaners to powerful acids. Many treatments should be used only in porcelain toilets, since synthetic materials might be damaged.
Does Scouring Powder remove toilet rings?
Q: All three of our toilets have developed ugly rings at the water line in the bowl. Scouring powder doesn't remove them. Can you help? A: Toilet rings are generally...
Can bleach be used on plastic?
A: I don’t think bleach is the best cleaner for this. You might be able to remove the stains with a household cleaner such as Fantastic. If that doesn’t work, try Zud, a special rust-removing cleaner sold at some home centers and supermarkets. If you use Zud, follow directions on the container carefully — “very gentle rubbing” is specified for plastic surfaces, and it should not be used on painted surfaces.
Can you use pumice on porcelain toilets?
Many treatments should be used only in porcelain toilets, since synthetic materials might be damaged. (Porcelain toilets can also be damaged by hard scrubbing with abrasive cleaners.) One of the most popular remedies, however, is a very fine abrasive called pumice. For toilet use, this is generally sold in stick form, often with a handle attached.
