if the base or pebble crete is sound and not cracked then yes you can tile / pave over it with the correct adhesive's. ie: optima Awesome! Thanks for that There's no cracks and the pebbles are securely stuck.
Can You tile over pebble concrete?
It can be applied to any sound concrete including old pebblecrete. Decorative styles and themes are endless with the use of patterns, textures and colours. Similarly, can you tile over aggregate concrete? More than almost any other type of floor covering, tile needs a rock-solid base.
Can You uncoupling pebblecrete from concrete?
If you attach the tile to concrete, you need to take special precautions by uncoupling the tile from the concrete. Rather than using cement boards (CBUs), the favored method is to use an uncoupling membrane. Simply so, can you Pebblecrete over Pebblecrete?
How do you remove pebblecrete from a concrete floor?
Smash off (with a hammer) as much pebblecrete as you possibly can without cracking the tiles underneath. Try and scrape off as much of the leftover pebblecrete as you possibly can with a blunt screwdriver over the tiles.
Can you paint a pebblecrete pool?
You can't just use any type of paint to paint the interior of a pebblecrete pool, and your pool surface. Luxapool is also water based and is a non-slip, rubberised material that's safe for both pools and pool surrounds. How do I remove Pebblecrete?
Can you tile directly on concrete?
You can install the tile directly on the concrete. You can install a CBU or cement board on the concrete, then the tile on top of that. Finally, you can use an uncoupling membrane between the tile and the concrete.
Do you have to seal concrete before tile?
Sealing a concrete floor before covering it with tile or carpet is a great idea. Sealing the concrete can prevent condensation and protect the floor. This means your carpet or tile stays dry and thus lowers the chances of mold and mildew building up.
How do you lay ceramic tile on a concrete floor?
0:017:00How to Lay Tile Over Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhile the glue is still wet lay this fiberglass reinforced paper on top of the adhesive. The jointsMoreWhile the glue is still wet lay this fiberglass reinforced paper on top of the adhesive. The joints can be overlapped or butted. The paper bonds securely to the glue.
Can you tile on sand and cement?
Thick layer of sand-cement mixture must be used to lay tile traditionally in lump and/or to adjust the floor level, in order to gain its bonding mechanism. There will then be more loads onto structure. Moreover, there will be material wastage since the mixture dries faster than the application.
How do you waterproof a concrete floor before tiling?
Use a roller with an extended handle to apply the concrete sealer. Be sure to cover the entire floor to create an effective protective layer. Take care to keep the surface level as you go, and avoid building up uneven layers of sealer. Allow the sealer to dry completely.
Do you need a moisture barrier under tile?
A moisture barrier helps control the water vapor's movement to help protect your floors. Therefore, if you're installing floors in an area that sees moisture, even a little, a vapor barrier is needed.
What goes under tile on concrete?
A cement board or backer board is the best for this purpose. The boards protect against moisture in flooring materials. They also give added stability when installing tile floors with mortar spacers that can make installation easier.
Can you tile over a concrete patio?
An existing concrete patio or walkway can be tiled as long as water drains off it and any cracks in it are stable and level (one side of the crack shouldn't be higher than the other).
What do I need to lay tile on concrete?
1:095:12How To Lay A Tile Floor On Concrete #DIY #Homeimprovement - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe are using a 3/8 tooth flooring trowel appropriate for a 16 inch tile cone. The thinset evenly.MoreWe are using a 3/8 tooth flooring trowel appropriate for a 16 inch tile cone. The thinset evenly. Using the notched side of the trowel avoid circular and swirling patterns and set your tile.
Is tile adhesive stronger than mortar?
Thinset is a stronger material than mastic, making it a better choice for horizontal applications such as flooring that get a lot of pounding. Dry-mix thinset is inexpensive and easy to use.
Which is better tile adhesive or cement?
Because cement shrinks after drying it leaves hollow spaces below tile surface. These are weak spots in a floor and any impact will result in tile chipping or cracking. For a durable and trouble free installation of tiles adhesives is the right solution.
Can you lay porcelain tiles on screed?
Porcelain slabs are suitable for fixing on screed both for internal and external projects. If you are laying screed on top of an existing smooth or shiny floor, you may need to key the surface to ensure stability.
How do you modernise Pebblecrete?
Thanks everyone- some great advice! I think we will extend and hone it down and add some wood elements in some way!
Comments (11)
Pebbecrete is a stuck on layer that can be removed with a lot of effort but this looks like exposed aggregate that is part of the concrete ... we have extended ours with extra sections of exposed aggregate and i've seen it done in a local public space made in separate sections of different coloured exposed aggregates
