Receiving Helpdesk

can you put karndean on stairs

by Keegan Wolf Published 3 years ago Updated 3 years ago

Can Karndean be used on stairs? Yes, it can. The front edge of each step will need to be finished off with a compatible stair nosing - your retailer and/or specialist installer will be able to give you all the information and advice you need.

Can karndean flooring be used on walls?

Karndean Designflooring is designed as a floor covering and is therefore not recommended for use on walls or ceilings. Can Karndean be installed outside? No. Karndean is not suitable for outside use.

How do you finish the front edge of karndean steps?

The front edge of each step will need to be finished off with a compatible stair nosing - your retailer and/or flooring installer will be able to give you all the information and advice you need. Click to see full answer. In respect to this, how long before you can walk on karndean? Cut the pieces a little long for a good, tight fit.

How do I Clean my karndean floor?

Follow these simple steps for cleaning your Karndean floor: With a soft sweeping brush, remove any loose dirt or dust. Add 50ml of Karndean Clean (1 notch represents 50ml) to approximately 8-10 litres of clean water.

What type of subfloor should I use with karndean looselay?

For our Karndean LooseLay range, the subfloor should be solid with minimal flexibility. All loose boards must be firmly fastened, gaps filled and undulations removed, and where necessary, overlay floorboards with underlayment grade plywood or similar.

How do you fit Karndean on stairs?

0:141:58How to install vinyl on stairs | Tutorial by Quick-Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide take an aluminum profile and carefully place it on the edge of the stairs firmly screw this in.MoreSide take an aluminum profile and carefully place it on the edge of the stairs firmly screw this in. Position your steps will probably have a lot of irregularities.

Can Karndean be laid on floorboards?

Can you put Karndean over floorboards? Yes, you can, but the floorboards will need to be covered with large sheets of at least 6mm thick plywood screwed to the floor.

Does Karndean scratch easily?

All Karndean LVT flooring is waterproof, long lasting and scratch resistant, and built to such a high standard that you'll find lifetime domestic warranties offered across their ranges (and generous commercial warranties offered, too).

How long does Karndean last?

A. Karndean flooring is designed to last for over 35 years, which is 10 years longer than the industry standard.

Do you need to remove skirting boards to lay Karndean flooring?

The fitter will lay your Karndean to the skirting as tightly as possible, or depending on the subfloor, underneath the skirting. So, there's no need for you to remove miles of skirting board… phew!

Does Karndean look cheap?

Karndean flooring is available in many different colours and made of vinyl, but made to look like wood. Its premise is that it looks like wood and you get the look and feel of natural flooring but without the cost or the care involved with wood.

Can you mop Karndean?

With a hygienic and durable surface treatment that resists dirt and stains, your Karndean floor is easy to keep clean on a daily basis with a soft broom, damp mop and Karndean Clean. If you wish to use a vacuum cleaner we recommend checking with the manufacturer to make sure it's suitable for use on a Karndean floor.

Is Karndean better than laminate?

In short, Karndean is more robust, better made and more attractive than most laminate options.

Can dogs scratch Karndean flooring?

Scratch and scuff resistant All Karndean floors benefit from our K-Guard+ surface protection system. Using PU technology, K-Guard+ provides a hygienic and durable finish that will protect your floor for years to come. Be sure your pets' nails are a reasonable length to help protect your floors against deep scratches.

Is Karndean as good as Amtico?

Both Amtico and Karndean are worth your money for a great looking floor. For a matte finish, Amtico would be the ideal choice. For a glossier look, choose Karndean. Ultimately, the final decision regarding the right flooring solution should be a fine balance between budget and preference.

Does Karndean dent?

Kardean flooring is made from strong and robust vinyl, allowing it to withstand a lot of traffic. Unlike hardwood flooring, this flooring does not easily scratch or dent.

Why is my Karndean floor slippery?

Will a Karndean floor be slippery? As with most smooth floor coverings, water and other liquids can make it slippery. Karndean floors are designed to be slip resistant, but it's always best to clean up any spillages straight away, and keep the floor dry.

How thick is plywood underlayment?

The only approved underlayments are APA approved “Underlayment Grade” plywood a minimum of ¼” thick, or any product manufactured as an underlayment material for resilient flooring supported by a recommendation or datasheet from the manufacturer stating the same.

Do Karndean loose lay boards need to be fastened?

For our Karndean LooseLay range, the subfloor should be solid with minimal flexibility. All loose boards must be firmly fastened, gaps filled and undulations removed, and where necessary, overlay floorboards with underlayment grade plywood or similar. For more information, please refer to the full Karndean LooseLay installation guidelines.

Can you buy Karndean flooring over the internet?

We definitely recommend speaking to one of our flooring specialists rather than buying our flooring over the internet. Please note, it is important that the Karndean flooring is professionally installed in order to maintain your warranty. Purchasing Karndean over the internet would be at your own risk.

Paul Well-Known Member

Stair rods Ali wraps ,they are proving popular with myself . Think most people prefer the look of the Ali wraps over the bendy bulls . Either that or it’s the price lol

RMG Well-Known Member

I've only fitted ali wraps but i think rounded looks much better. I've seen a few pictures of people using ali wrap for all but the step with the curve, seems a good idea

Paul webb Well-Known Member

Bendy Bull is most prob your best bet but you could the Stair-rods Nose LVT perfect 90 stairs. I would like to find a plastering edge type trim for 90 stairs.. reckon that would look better.

Paul webb Well-Known Member

Stairrods now do a divider profile, I've been using a similar one primarily for mattwells, but also on the odd single step, it fits under the ply on the tread and overhangs the riser by the thickness of the lvt, then butt the lvt up to both edges, so on the tread you have about 2mm of profile showing and the riser 8mm of profile showing, sorry it's not a great explanation.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9