Receiving Helpdesk

can you cut tree branches with hedge trimmer

by Theron Gaylord Published 3 years ago Updated 2 years ago

Even the heavy-duty hedge trimmers with wider grooves don't have the horsepower to cut through tree branches. Fact is, hedge trimmers can't do the job of more suitable trimming tools like pruning shears or loppers.May 28, 2019

What size branch can a hedge trimmer cut?

Hedge trimmers cannot cut branches that are more than ¾” (2.54 cm) in diameter. Theoretically, hedge trimmers can cut some branches, but the further down you cut, the thicker the branches will become. At this point you should use garden or pruning shears, loppers, a pruning saw, or a chainsaw.

How do you trim a tree with a hedge trimmer?

0:004:35Tree Trimming & Hedge/Shrub Clean-Up - Time Lapse - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're gonna cut a quarter chunk out so it's off the roof as well. And then we're going to shapeMoreWe're gonna cut a quarter chunk out so it's off the roof as well. And then we're going to shape everything up get that out of the sunlight. And it's got a good basis just a little bit leggy.

Will a hedge trimmer cut through thick branches?

The hedge trimmers for thick branches are usually powerful, resulting in high-end performance. You will easily be able to take great care of your lawn with the hedge trimmer. These units make cutting through hard-to-reach areas more accessible.

What is the best tool to cut tree branches?

A chainsaw provides the cleanest cut when you're dealing with limbs thicker than 3 inches. If your pruning job requires a chainsaw, it's recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are beyond your reach. Most pole pruners cut limbs up to 2 inches in diameter.

How do you cut thick tree branches?

0:342:23How to Cut a Tree Branch Properly - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking the right cut to a tree branch or thick limb involves a three cut approach the first cut isMoreMaking the right cut to a tree branch or thick limb involves a three cut approach the first cut is made one or two feet out from the trunk. This cut starts on the underside of the limb.

How useful is a hedge trimmer?

Hedge trimmers allow you to get your hedges and shrubs looking just right without it taking up too much time or energy. The right hedge trimmer makes the work efficient, safe, and fast.

What can a hedge trimmer cut?

Hedge Trimmer UsesTrim and shape hedgerows, medium-to-large bushes and deep, hard-to-reach bushes.Prune perennials, grasses and ground cover.Any branches that fit between the teeth of your trimmer's blade. ... Cut down large weeds and overgrowth, but only when they are dry.

Can I cut tall grass with a hedge trimmer?

Advantages of Cutting Long Grass with a Hedge Trimmer Here are a few advantages that a hedge trimmer has over those other options when it comes to cutting grass. It's motorized so you can cut long grass much more quickly and effectively.

What is the most powerful electric hedge trimmer?

BEST OVERALL: EGO Power+ 24-Inch 56-Volt Cordless Hedge Trimmer.RUNNER-UP: BLACK+DECKER 20V MAX Cordless Hedge Trimmer.BEST BANG FOR THE BUCK: Greenworks 2.7 Amp Corded Hedge Trimmer.EASIEST TO USE: WORX WG261 20V Power Share Cordless Hedge Trimmer.BEST CORDLESS: Earthwise 20-Inch Cordless Pole Hedge Trimmer.More items...•

What is the best tool to cut thick branches?

So, what are the best tools to use for cutting thick branches? Loppers, pole tree pruners, and pole saws are good for cutting less than 2-inches (5.08 cm) thick branches. If the branches are 3-inches (7.62 cm) thick or more, it may be best to use a hand saw, or a chain saw.

How do you cut a tree branch without a chainsaw?

3:114:36How to quickly cut tree branches without a chainsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipProject if you need to trim tree branches don't use a chainsaw get on a ladder with your sawzall.MoreProject if you need to trim tree branches don't use a chainsaw get on a ladder with your sawzall. And a pruning blade. And trust me it is the fastest. And probably safest way to cut tree branches.

How do you trim tree branches yourself?

Prune all branches above four feet growing toward the center of the tree. Always cut back to a larger branch of the trunk. Don't cut to see over branches, but to see through them. Cut off branches that cross each other, rub against the trunk or are dead.

How wide is a hedge trimmer?

Their grooves are about ¾ of an inch to half an inch wide at most, and when you compare that to the size of your tree’s branches, it’s just not the right fit. Even the heavy-duty hedge trimmers with wider grooves don’t have the horsepower to cut through tree branches.

What to do when pruning a tree?

Also, wear eye protection and a helmet when pruning limbs off tall trees. A falling limb can knock over a ladder if you are using one leaning against the tree trunk. Caution is your friend when tackling such a task. see more. Show more replies.

What tree branches come in all sizes?

From the burly branches of an oak tree to the skinny limbs of a dogwood, tree branches come in all sorts of sizes. That means there are a variety of tools to look to when it’s time to prune.

Can you cut a tree branch without a ladder?

So, if you ever have to strain and stretch to reach a branch, find that a branch is too thick to cut or simply can’t reach a limb without a ladder, have a professional arborist prune the tree instead.

Can hedge trimmers use pruning shears?

Fact is, hedge trimmers can’t do the job of more suitable trimming tools like pruning shears or loppers. For the best results, use one of these three essential tools for trimming trees.

Is hedge trimmer cheaper than shear?

Hedge trimmer, on the other hand, is more popular among gardeners and farmers. They are cheap and makes the task very simple as compared to a shear.

Can hedge trimmers be used on thin branches?

Well, the answer is both Yes and No. Yes, in the case when the branches are rather thin and the hedge trimmer is powerful enough to get the job done. No, in the sense when the branches are comparatively very thick and even larger than the size of the blade of your Hedge Trimmer.

Do you trim a hedge when it is overgrown?

It is important to an owner to trim and cut the hedges or shrubs occasionally into good shape when they are overgrown and lose their shape. Many of us are not fit for the task of doing this. One must know how to proceed and also that it is a time-consuming task. If you do have to cut down a hedge which has thick branches then follow this rule.

Can you use a hedge trimmer to cut through large trees?

To cut through large branches and trees with ease. If your branches are large then never go for a Hedge Trimmer and instead buy a chain saw to get the job done.

Can you cut thicker branches with a chain saw?

There is a limitation set by the manufacturer and you can easily check them in the product manual about how thick branch your trimmer can handle. Always read the product manual and don’t try to cut thicker branches with it otherwise you will end up with a bent and damaged trimmer. This is why a chain saw is made of.

Can you use a chain saw to cut a tree branch?

Chain saws are not best for trimming and Hedge trimmer are not best for cutting branches. Both of them are made for a different task and you should not try to use a hedge trimmer to cut down a branch off a tree. You can try but, in a while, you will realize that it doesn’t have even power to but down a thick branch.

What is a hedge trimmer?

A good hedge trimmer can be used to cut a variety of plants. It’s important to use them only for the work they were designed to do and avoid using as a universal tree maintenance machine. Let’s see how they can be useful;

Can you use a hedge trimmer to cut branches?

Can you use a hedge trimmer to cut branches? Yes, you can, but that’s not what the machine was designed for. The blades of the trimmer aren’t strong enough to cut through hard wood branches. You’ll end up with uneven cuts on the branches, and your trimmer is likely to get damaged. You don’t want that to happen, right?

Can hedge trimmers cut through trees?

Hedge trimmers, depending on the size, can be quite powerful that it may seem like they can cut through thick tree branches with ease. The misconception comes mainly from their large size. They kinda look like chainsaws, and it’s not strange to think of these two as the same, at least for someone who isn’t clear about them.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9