You can cut PVC pipe with a chop saw and it does not matter whether the pipe is made of plastic or metal. If you are only going to make a few cuts on the pipe, a standard blade is fine to use, however, if you plan to make quite a few cuts, consider switching to a melamine saw blade.
Can you cut PVC pipe with a saw?
Always clamp, never hold PVC pipe when cutting with a saw. Wear safety glasses, goggles or other eye protection when cutting PVC pipe, as fragments of pipe can be ejected from the area being cut. This is particularly important when using power tools. Wear a mask or respirator.
Is a miter saw the best tool for cutting PVC pipe?
Is a Miter Saw the Best Tool for Cutting PVC Pipes? 1 Option #1: PVC Pipe Cutter. Admittedly, a miter saw is not the number one choice for cutting PVC pipe. In fact, the most popular and most widely used ... 2 Option #2: Hacksaw. 3 Option #3: Miter Saw.
Can you cut plastic pipe square?
Take the frustration out of cutting plastic pipe with these pro methods for square and accurate results. PVC (polyvinyl chloride) pipe is a type of plastic tubing commonly used for drains. These are the white pipes with purple primer often seen in residential basements.
How to cut a pipe with a pipe cutter?
Using a tape measure and a marking tool such as a pencil, mark the point at which you want to cut the pipe. Hold the pipe in one hand with the mark you made facing up, and place the pipe inside the pipe cutter mechanism. Be sure that the blade of the cutter is on the cut mark you previously made.
What saw blade cuts PVC?
For cutting PVC pipe, use a combination wood/metal blade with a 10/14 TPI configuration. There is no specialty PVC sawzall blade, nor is one necessary.
Can any saw cut PVC?
Using a hand saw is the most common way of cutting a PVC pipe because the tool essentially does all of the work for you. Like the plastic pipe cutter, hand saws are relatively inexpensive to buy. You can use nearly any kind of saw, but a hacksaw is best, as it affords much more flexibility.
Can you cut 4 inch PVC with a miter saw?
However, due to these blades being serrated, you might end up with some burrs on the pipe. You can minimize that negative side by using a very fine tooth blade, though. Also, keep in mind that a standard miter saw will work well to cut PVC piping using a straight 90-degree cut.
Can I cut pipe with a chop saw?
1:517:05Cutting Pipe with Metal Chop Saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd as you cut in you're gonna have a long sort of trough that you're cutting and you'll see as I'mMoreAnd as you cut in you're gonna have a long sort of trough that you're cutting and you'll see as I'm working I'll actually yeah.
Will a wood saw cut PVC?
The hacksaw or back saw are the most common methods to cut lengths of PVC pipe, as most individuals already have either one in their toolbox or garage. Hacksaws and back saws work well, but are somewhat time consuming and can cause additional work to de-burr the edges of the cut PVC pipe.
What is the easiest way to cut PVC pipe?
0:493:064 Ways to Cut PVC Pipe at Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean cut the third way is to use a dremel or similar rotary tool this is probably the method IMoreClean cut the third way is to use a dremel or similar rotary tool this is probably the method I recommend the least.
Can you cut PVC trim with a miter saw?
2:192:52Cutting PVC with miter saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this is cutting PVC with a miter saw ten inch miter saw is great also but I would prefer a 12 12MoreSo this is cutting PVC with a miter saw ten inch miter saw is great also but I would prefer a 12 12 inch miter saw or a 10 inch as you can get larger diameter pipe you cut it with it.
Can you cut hard plastic with a Mitre saw?
The more teeth a blade has, the better for plastic. But, you said this will be a "one-off" job, you shouldn't have any issues. If you have a band saw, this would work even better. Far better than blades made specifically for plastics.
How do you cut PVC without a saw?
3:184:06Quick Tip for Cutting PVC Pipe without a Saw - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right folks will a little bit different video than what I normally put up but just thought I'dMoreAll right folks will a little bit different video than what I normally put up but just thought I'd share that tip with you if you are in need of cutting PVC.
How do you cut PVC pipe straight?
0:003:03How to Cut PVC or ABS Pipe Straight - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it into the cut hold it against the side of the pipe that you want to keep and cut the rest ofMorePut it into the cut hold it against the side of the pipe that you want to keep and cut the rest of the way. You'll end up with a nice clean. Cut by hand takes a little longer.
What can you cut pipe with?
Rigid pipe can be cut with such PVC pipe and tube cutters as hacksaws, power miter saws and scissor-type cutters, but ratchet-style cutters tend to strike an effective balance of affordability, flexibility and ease of use. With a hacksaw, slowly draw the blade back and forth, making sure that the cut is straight.
How do you cut PVC pipe 90 degrees?
0:103:02Best Way to Cut PVC Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are number of ways you can and I strongly suggest actually a combination of things you mightMoreThere are number of ways you can and I strongly suggest actually a combination of things you might need first off the most basic two I would definitely go is with a handsaw.
How to cut PVC pipe with a miter saw?
Step 1: Choose the Right Blade. The first thing that you need to do when cutting PVC pipes with a miter saw is to equip the right blade. Remember, if you use a coarse or large-toothed miter saw blade, you will end up creating a lot of burrs and more or less shredding your pipe. To achieve the best result, you want to use a very fine-toothed blade. ...
Which is better, a PVC cutter or a miter saw?
There you have it, folks. Although a PVC cutter is probably the better tool to be using for this task, using a miter saw is more than doable. In fact, if you need to cut many pipes in a row fast, this might be the preferable option.
What angle do you cut a pipe with a compound miter saw?
For instance, if the pipe needs to connect to another pipe at a 90-degree right angle, you will need to cut the pipe with the blade at a 45-degree angle. So, make sure to do your measurements first.
Why use a miter saw?
Miter saws also have the advantage of being able to set the angle and just move the blade down through the pipe as it spins at breakneck speeds, resulting in very accurate cuts. However, due to these blades being serrated, you might end up with some burrs on the pipe.
What to wear when cutting PVC pipe?
Wearing gloves can be dangerous. That said, what you do want to wear when cutting PVC pipe with a miter saw is a good pair of safety goggles. Before making the cut, ensure that the pipe is resting firmly against the rear guard, as this will help to minimize movement.
What is PVC pipe used for?
PVC piping is something that is very often used in plumbing, although it does of course have other applications too, such as for electrical work and general construction. That said, the chances that the PVC pipes you buy are already the right length for use are very low. Therefore, you will have to learn how to cut those PVC pipes on your own, ...
How many teeth should a saw blade have?
The more teeth your blade has, and the smaller the teeth are, the better the result will be. Your saw blade should have at least 4 or 5 teeth per inch, if not more.
How to cut PVC pipe with miter saw?
Position the pipe against the fence of the miter saw so the cut mark is easily seen, line up the blade with the desired cut mark, lift the saw up and start the blade, and slowly lower the blade into the PVC pipe until it cuts all the way through.
What tools do I need to cut PVC pipe?
There are three tools that will allow you to cut PVC pipe with enough accuracy to ensure a tight seal: a PVC cutter, a handsaw, and a miter saw. Depending on the space you’re working in and your comfort level with tools, ...
How to push a blade through PVC pipe?
Operation is simple: Place the pipe on a stable surface like sawhorses or a workbench (even a cabinet will do), line the blade up on the cut mark, hold the tool square, and then squeeze the handles together to push the blade through the PVC.
What is PVC pipe?
PVC (polyvinyl chloride) pipe is a type of plastic tubing commonly used for drains. These are the white pipes with purple primer often seen in residential basements. Ambitious DIYers attempting a kitchen or bathroom renovation, as well as those who like to tackle their own plumbing repairs, will likely have to work with PVC pipe.
Do you need lubricant before cutting PVC pipe?
Before You Cut. Photo: amazon.com. Almost all materials benefit from a little lubrication during the cutting process, and PVC pipe is no different. Lubricants keep friction down, which allows the blade to glide easier. Lubricants can also keep dust and particulates from getting into the air.
Can you move a shower with PVC?
Moving a shower, sink, or toilet—even simply replacing a rusty sink trap—will require some PVC know-how. Dealing with PVC can be a bit tricky. While you’ll have no trouble finding the necessary fittings and cements to bond pieces of pipe together, the difficulty often comes when cutting PVC pipe l.
Can you twist a pipe with a miter saw?
If the miter saw doesn’t cut all the way through in the first attempt, let the blade come to a stop, then twist the pipe so the remaining material can be cut with a second drop of the blade. Twisting the pipe while the blade is running is unsafe and hardly ever accurate.
What happens when you cut PVC pipe?
Wear a mask or respirator. PVC pipe, when cut, can emit small particles that can irritate the lungs or throat. PVC, when heated to its melting point, can also emit chlorine gas, which with long-term exposure, can be dangerous.
What to wear when cutting PVC pipe?
Wear safety glasses, goggles or other eye protection when cutting PVC pipe, as fragments of pipe can be ejected from the area being cut. This is particularly important when using power tools.
What is the difference between a ratcheting pipe cutter and a scissor pipe cutter?
The ratcheting-style pipe cutter is slightly more expensive than the scissor style pipe cutter; however, you can do larger pieces of PVC with less effort (up to 1-1/2" pipe in some cases) with these types of PVC cutters.
How to keep pipe cutter straight?
Grasp the handle with pressure, then slowly rotate the pipe cutter around the pipe, making sure that you remain straight. If the pipe cutter begins to make a 'spiral ' and go off to the left or right, restart the cut, and attempt to keep is straight (this is usually caused by gripping too hard).
How to get a miter saw to stop spinning?
Pull the switch trigger and slowly bring the miter saw arm down into and through the pipe. Bring the miter saw down through the entire pipe, then release the switch trigger. Allow the blade to stop spinning before removing the pipe or raising the blade.
What is a scissor pipe cutter?
The scissor-style PVC pipe cutter is inexpensive and easy to use. They are available at most hardware stores or home improvement centers in the plumbing section. They are, however, limited in their cutting capability and can add stress to the hands as they are ideal for smaller tubing. Scissor-style plastic pipe cutters should only be used for 1" or smaller sizes of PVC.
Why is a power saw not recommended?
This is due to the curvature of PVC pipe, and the difficulty in successfully maintaining a secure hold onto the curved pipe. Additionally, the curvature causes the saw to come into contact at different points on the curved pipe, and may make the blade 'bounce' off the pipe, producing undesirable results or injury.
How do I cut PVC with a miter saw?
In a word, carefully. Your safety and the safety of your limbs and digits are paramount. Manufacturers design miter saws to be pragmatic and user friendly. Mishandling any power tool, however, can have hazardous consequences. So start with the following instructions to help you safely cut PVC pipe.
What else can I do with a Miter Saw?
Miter saws are used globally in construction operations to cut wood, pipes as we established, and vinyl flooring. Although not recommended without cutting fluids and a change of blades, it is possible for you to use your miter saw to cut through aluminum, copper, brass, or even tiles.
Blades and Cutting Fluid
Freud LU77M012 D1296L 12-inch blade is an industrial class blade with 96 teeth, made from high-density Carbide. It also has a Silver Ice blade coating that protects the blade from corrosion and heat. The coating is also non-stick, which decreases drag and prevents the blade from gumming. For clean cuts, this is probably going to be your best bet.
Conclusion
If you want to use your miter saw to cut PVC, go ahead. Even with a stock standard blade, you should not encounter any problems. However, for a superior and smoother cut, use a multi toothed saw blade.
Difference of Wood and PVC Cutting Using Table Saw
When we consider the cutting process. We must know about the material properties to identify the material behavior. So let’s pay attention to the PVC and Wood.
Cut PVC Pipe Using Table Saw
Beyond the PVC sheet, we can cut the PVC pipes. We can find various diameter PVC pipes. Small diameter pipes can be cut with a hacksaw blade. When the dimeter is high its thickness is also increased due to provide strength to the pipe and hold the pressure. So these kinds of PVC pips are not able to cut using the regular hacksaw blade.
Optional Ways to Cut the PVC insted of Table Saw
Using the Table saw for cutting the PVC is not the one and only solution for the cutting PVC. There are some optional ways instead of the table saw cutting method. Using a table saw for cutting the PVC is really abrasive. PVC is not a hard material. So table saw will cut the PVC aggressively.
Is PVC Cutting Fume Toxic?
PVC cutting fume and dust will not kill you suddenly you breathe it. But dust can be inhaled from the mouth or nose. So remember to wear the face mask before you use it. But a high amount of PVC fume can be hurt you. So add the dust removing method before you start the work.
What blade to use to cut PVC?
Plywood blade would be good. I've cut PVC with just about everything under the sun, from a small tooth metal saw to a Sawzall with a wood blade on it.
Does Lowes carry ratcheting pipe cutters?
Lowe's now carries a ratcheting pipe cutter for PVC up to 2" for $38. If I had a plumbing job to do of any size with larger PVC, I'd get one.
Is A Miter Saw The Best Tool For Cutting Pvc Pipes?
How to Cut A Pvc Pipe with A Miter Saw
- Alright, so now that we have learned about the different methods of cutting PVC piping, let’s go through a step by step tutorial on how to do so with a miter saw. This method is quite fast and easy.
Mistakes to Avoid, Tips & Tricks
- Let’s quickly go over some important tips to make this process as easy and safe as possible. 1. Always make sure to tie up any long hair, so it doesn’t get caught in the blade. 2. Opposed to what some might think, don’t wear gloves when using saws like this. You need full mobility and sensation in your fingers. Wearing gloves can be dangerous. That said, what you do want to wea…
Summary
- There you have it, folks. Although a PVC cutter is probably the better tool to be using for this task, using a miter saw is more than doable. In fact, if you need to cut many pipes in a row fast, this might be the preferable option. Just be sure to follow all of the steps and tips that we have gone over today, and you shouldn’t have a problem.